Ok.
I guess those people are in charge of the packages available here :
www.cloudmakers.eu/atikdrivers/ ?

Is there a (even small) chance that the (seemingly recent) v1.5 addressed the issue (I tested only v1.4) ?
I will test this new version anyway.
Thanks again.
Best
--
François

Hi François, the only one in charge for this driver is me

This issue is not handled in 1.5, driver simply returns what camera reports it is wrong. I just received reply from Atik, that early version of this camera had such issue, but they should investigate, how it is handled in Windows driver. I'll let you updated.

Peter

Hi François, please can you try version 1.6? I think, I can reproduce the issue and found one 200ms relay which is in windows code and was missing in INDI driver. Peter

www.cloudmakers.eu/atikdrivers/

Hi Peter,
great news!
I'll give you a feedback asap, that should be no later that tonight.
best

It took a bit longer than expected, but I finally found the time to test 1.6.
In one word, it just works flawlessly !
Thanks a lot, big relief for me, thats great!
Thanks very much for your time, Peter.
Best regards and dark skies!

Hi,

I had similar problems with my Atik 11000. I have just tried version 1.6 of the atik driver. In my case it works when binning mode is set to 2 or higher. But when I take unbinned images the download never completes. Also the temperature indicator lights up red after a little while. The only way to get the camera working again is by powering down and reconnecting the power (and restart indi server as well).

I have attached the message log that 'indiserver -vvv indi_atik_ccd' creates. Hopes this provides a hint to what is causing this problem.

Best regards,
Camiel

Camiel, please try to run atik_ccd_test and paste here its output. Thank you, Peter

Hi Peter,

Here is the output that you requested.

Regards,
Camiel

Sorry, my fault... Can you try it again with this command?

atik_ccd_test -long 1.0

Atik 11000 doesn't work (with my driver) with exposure time shorter than 1s, I don't know why. Peter

Hi Peter,

Here is the output with the '-long 1.0' option.
By the way, the version 1.1 of atik_ccd_test that I am still running on my raspberry pi
does work without this option. Just in case that this is useful to you, I have included that
log file as well.

Best regards,
Camiel

Hi Camiel, thank you... It seems, that I have look at the change in 1.6. I added some delays due to temperature sensor issue and it seems, that it affects something else as well, but not on my machine or my camera Peter

Pls. can you try it with version 1.7? Now delay is used just for temperature reading command, otherwise it is the same as with 1.5. Peter

www.cloudmakers.eu/atikdrivers/