×

INDI Library v2.0.6 is Released (02 Feb 2024)

Bi-monthly release with minor bug fixes and improvements

"master connect" for all devices

  • Posts: 2247
  • Thank you received: 223
If there a way to connect all devices with one click? Instead of having to go through the list of indiserver devices?
8 years 2 weeks ago #7245

Please Log in or Create an account to join the conversation.

  • Posts: 173
  • Thank you received: 19
In Ekos, just under the 'Start Indi" button is a "Connect" button. After clicking Start Indi, minimize the Indi control panel and click the Connect button and everything will connect at once....

--Jon
The following user(s) said Thank You: Jasem Mutlaq, Gonzothegreat
Last edit: 8 years 2 weeks ago by Jon.
8 years 2 weeks ago #7246

Please Log in or Create an account to join the conversation.

  • Posts: 2247
  • Thank you received: 223

cool off to try that now, thanks.

cool beans it works, thanks a lot.
Last edit: 8 years 2 weeks ago by Gonzothegreat.
8 years 2 weeks ago #7247

Please Log in or Create an account to join the conversation.

  • Posts: 173
  • Thank you received: 19
You're welcome! Glad I could help.....

--Jon
8 years 2 weeks ago #7248

Please Log in or Create an account to join the conversation.

  • Posts: 486
  • Thank you received: 87
I am having this issue but the solution only works on a local server.
If I try the same on my PI with a remote connection the connect button does not become available
after minimizing the INDI window. I do get disconnect button after connecting all devices manually.
I am using xubuntu 16.04 on the local machine.

Regards
7 years 10 months ago #8278

Please Log in or Create an account to join the conversation.

  • Posts: 456
  • Thank you received: 76
Are any of your remote drivers in a 'connected' state when the connect button is unavailable?

I've noticed this on my setup. I have indi-server running remote. If another client connects and changes one driver to 'connected' then the ekos connect-all button is not available, Its only available when everything is in a not connected state.

Derek
7 years 10 months ago #8279

Please Log in or Create an account to join the conversation.

  • Posts: 486
  • Thank you received: 87
I my case all the drivers are UNCONNECTED and I only have one Ekos client running and it's the first to connect to the server.

PS: I have tracked the issued down to the ATIK_CCD driver, if I remove it from the profile (leaving only the EQMOD, ZWO, JOYSTICK and MOONLITE) , it works, the CONNECT button becomes available and can be used. That's odd since it happens with the camera connected (power + usb), I can start the camera manually if added to the profile.

It looks like it has something to do with the device name:
2016-05-17T18:54:37 Unable to establish remote device: + ATIK CCD Please ensure remote device name corresponds to actual device name.
In current version of kstars-bleeding I can't see no option to change the driver name.

Nuno
The following user(s) said Thank You: Derek
Last edit: 7 years 10 months ago by nMAC.
7 years 10 months ago #8290

Please Log in or Create an account to join the conversation.

Yes, the Atik driver uses a different naming convention. Will see if this can be resolved either by the driver or Ekos.
The following user(s) said Thank You: nMAC
7 years 10 months ago #8336

Please Log in or Create an account to join the conversation.

  • Posts: 456
  • Thank you received: 76
Yes its the Atik driver name. I have the same problem now too. :(
Derek
7 years 10 months ago #8496

Please Log in or Create an account to join the conversation.

If you use kstars-bleeding it should be resolved, you're having the same problem?
The following user(s) said Thank You: nMAC, Derek
7 years 10 months ago #8498

Please Log in or Create an account to join the conversation.

  • Posts: 456
  • Thank you received: 76
Sorry, yes its fine now after updating. I dont update that regularly. Will be sure to update before reporting any issue again.
7 years 10 months ago #8501

Please Log in or Create an account to join the conversation.

  • Posts: 486
  • Thank you received: 87
Yes, I did an update yesterday and the issue is solved. Thank you!

Regards
7 years 10 months ago #8526

Please Log in or Create an account to join the conversation.

Time to create page: 0.243 seconds