×

INDI Library v2.0.6 is Released (02 Feb 2024)

Bi-monthly release with minor bug fixes and improvements

Problem with latest Pulsar2: PierSide property

  • Posts: 105
  • Thank you received: 23
Hi Jasem,

I have noticed that you have moved the PierSide property from the pulsar2 driver to the INDITelescope driver. It appears that this property is now read-only. However, it must be read-write because it is used slightly different from what you might expect. This property must be set by the user when syncing the telescope coordinates to a star in order to tell the controller what side the telescope is on. On the pulsar it is a write only property. Can you undo this change?

Regards,
Camiel
7 years 1 day ago #15715

Please Log in or Create an account to join the conversation.

Ok will do thanks for the report.

EDIT: I also made it check on each poll the pier side. Please make sure that doesn't cause issues as well.
Last edit: 7 years 13 hours ago by Jasem Mutlaq.
7 years 14 hours ago #15730

Please Log in or Create an account to join the conversation.

Time to create page: 0.327 seconds