2016-10-19T12:27:48: startup: indiserver -vvv indi_eqmod_telescope indi_simulator_ccd 
2016-10-19T12:27:48: Driver indi_eqmod_telescope: pid=1483 rfd=3 wfd=6 efd=7
2016-10-19T12:27:48: Driver indi_simulator_ccd: pid=1484 rfd=4 wfd=9 efd=10
2016-10-19T12:27:48: listening to port 7624 on fd 5
2016-10-19T12:27:48: Driver indi_simulator_ccd: sending msg copy 1 nq 1:
<getProperties version='1.7'/>

2016-10-19T12:27:48: Driver indi_eqmod_telescope: sending msg copy 1 nq 1:
<getProperties version='1.7'/>

2016-10-19T12:27:48: Driver indi_simulator_ccd: read getProperties Telescope Simulator EQUATORIAL_EOD_COORD 
2016-10-19T12:27:48: Driver indi_simulator_ccd: snooping on Telescope Simulator.EQUATORIAL_EOD_COORD
2016-10-19T12:27:48: Driver indi_simulator_ccd: read getProperties Telescope Simulator TELESCOPE_INFO 
2016-10-19T12:27:48: Driver indi_simulator_ccd: snooping on Telescope Simulator.TELESCOPE_INFO
2016-10-19T12:27:48: Driver indi_simulator_ccd: read getProperties CCD Simulator FILTER_SLOT 
2016-10-19T12:27:48: Driver indi_simulator_ccd: snooping on CCD Simulator.FILTER_SLOT
2016-10-19T12:27:48: Driver indi_simulator_ccd: read getProperties CCD Simulator FILTER_NAME 
2016-10-19T12:27:48: Driver indi_simulator_ccd: snooping on CCD Simulator.FILTER_NAME
2016-10-19T12:27:48: Driver indi_simulator_ccd: read getProperties Telescope Simulator EQUATORIAL_PE 
2016-10-19T12:27:48: Driver indi_simulator_ccd: snooping on Telescope Simulator.EQUATORIAL_PE
2016-10-19T12:27:48: Driver indi_simulator_ccd: read getProperties Focuser Simulator FWHM 
2016-10-19T12:27:48: Driver indi_simulator_ccd: snooping on Focuser Simulator.FWHM
2016-10-19T12:27:48: Driver indi_simulator_ccd: read defSwitchVector CCD Simulator CONNECTION Idle rw
    CONNECT='Off'
 DISCONNECT='On'
2016-10-19T12:27:48: Driver indi_simulator_ccd: read defTextVector CCD Simulator DRIVER_INFO Idle ro
 DRIVER_NAME='CCD Simulator'
 DRIVER_EXEC='indi_simulator_ccd'
 DRIVER_VERSION='1.0'
 DRIVER_INTERFACE='22'
2016-10-19T12:27:48: Driver indi_simulator_ccd: read defSwitchVector CCD Simulator DEBUG Idle rw
     ENABLE='Off'
    DISABLE='On'
2016-10-19T12:27:48: Driver indi_simulator_ccd: read defSwitchVector CCD Simulator CONFIG_PROCESS Idle rw
 CONFIG_LOAD='Off'
 CONFIG_SAVE='Off'
 CONFIG_DEFAULT='Off'
2016-10-19T12:27:48: Driver indi_simulator_ccd: read defTextVector CCD Simulator ACTIVE_DEVICES Idle rw
 ACTIVE_TELESCOPE='Telescope Simulator'
 ACTIVE_FOCUSER='Focuser Simulator'
 ACTIVE_FILTER='CCD Simulator'
2016-10-19T12:27:48: Driver indi_simulator_ccd: read setTextVector CCD Simulator ACTIVE_DEVICES Ok
 ACTIVE_TELESCOPE='Telescope Simulator'
 ACTIVE_FOCUSER='Focuser Simulator'
 ACTIVE_FILTER='CCD Simulator'
2016-10-19T12:27:48: Driver indi_simulator_ccd: read getProperties Telescope Simulator EQUATORIAL_EOD_COORD 
2016-10-19T12:27:48: Driver indi_simulator_ccd: read getProperties Telescope Simulator TELESCOPE_INFO 
2016-10-19T12:27:48: Driver indi_simulator_ccd: read getProperties CCD Simulator FILTER_SLOT 
2016-10-19T12:27:48: Driver indi_simulator_ccd: read getProperties CCD Simulator FILTER_NAME 
2016-10-19T12:27:48: Driver indi_simulator_ccd: read getProperties Telescope Simulator EQUATORIAL_PE 
2016-10-19T12:27:48: Driver indi_simulator_ccd: read getProperties Focuser Simulator FWHM 
2016-10-19T12:27:48: Driver indi_simulator_ccd: read defNumberVector CCD Simulator SIMULATOR_SETTINGS Idle rw
   SIM_XRES='1280'
   SIM_YRES='1024'
  SIM_XSIZE='5.2000000000000001776'
  SIM_YSIZE='5.2000000000000001776'
 SIM_MAXVAL='65000'
   SIM_BIAS='10'
 SIM_SATURATION='1'
 SIM_LIMITINGMAG='17'
  SIM_NOISE='10'
 SIM_SKYGLOW='19.5'
 SIM_OAGOFFSET='0'
  SIM_POLAR='0'
 SIM_POLARDRIFT='0'
 SIM_ROTATION='0'
2016-10-19T12:27:48: Driver indi_simulator_ccd: read defSwitchVector CCD Simulator ON_TIME_FACTOR Idle rw
         1X='On'
        10X='Off'
       100X='Off'
2016-10-19T12:27:48: Driver indi_eqmod_telescope: read getProperties GPS Simulator GEOGRAPHIC_COORD 
2016-10-19T12:27:48: Driver indi_eqmod_telescope: snooping on GPS Simulator.GEOGRAPHIC_COORD
2016-10-19T12:27:48: Driver indi_eqmod_telescope: read getProperties GPS Simulator TIME_UTC 
2016-10-19T12:27:48: Driver indi_eqmod_telescope: snooping on GPS Simulator.TIME_UTC
2016-10-19T12:27:48: Driver indi_eqmod_telescope: EnumeratePlugins - found plugin SVD Math Plugin
2016-10-19T12:27:48: Driver indi_eqmod_telescope: read defSwitchVector EQMod Mount CONNECTION Idle rw
    CONNECT='Off'
 DISCONNECT='On'
2016-10-19T12:27:48: Driver indi_eqmod_telescope: read defTextVector EQMod Mount DRIVER_INFO Idle ro
 DRIVER_NAME='EQMod Mount'
 DRIVER_EXEC='indi_eqmod_telescope'
 DRIVER_VERSION='0.3'
 DRIVER_INTERFACE='5'
2016-10-19T12:27:48: Driver indi_eqmod_telescope: read defNumberVector EQMod Mount ALIGNMENT_POINT_MANDATORY_NUMBERS Idle rw
 ALIGNMENT_POINT_ENTRY_OBSERVATION_JULIAN_DATE='0'
 ALIGNMENT_POINT_ENTRY_RA='0'
  ALIGNMENT_POINT_ENTRY_DEC='0'
 ALIGNMENT_POINT_ENTRY_VECTOR_X='0'
  ALIGNMENT_POINT_ENTRY_VECTOR_Y='0'
  ALIGNMENT_POINT_ENTRY_VECTOR_Z='0'
2016-10-19T12:27:48: Driver indi_eqmod_telescope: read defBLOBVector EQMod Mount ALIGNMENT_POINT_OPTIONAL_BINARY_BLOB Idle rw
2016-10-19T12:27:48: Driver indi_eqmod_telescope: read defNumberVector EQMod Mount ALIGNMENT_POINTSET_SIZE Idle ro
 ALIGNMENT_POINTSET_SIZE='0'
2016-10-19T12:27:48: Driver indi_eqmod_telescope: read defNumberVector EQMod Mount ALIGNMENT_POINTSET_CURRENT_ENTRY Idle rw
 ALIGNMENT_POINTSET_CURRENT_ENTRY='0'
2016-10-19T12:27:48: Driver indi_eqmod_telescope: read defSwitchVector EQMod Mount ALIGNMENT_POINTSET_ACTION Idle rw
     APPEND='On'
     INSERT='Off'
       EDIT='Off'
     DELETE='Off'
      CLEAR='Off'
       READ='Off'
 READ INCREMENT='Off'
 LOAD DATABASE='Off'
 SAVE DATABASE='Off'
2016-10-19T12:27:48: Driver indi_eqmod_telescope: read defSwitchVector EQMod Mount ALIGNMENT_POINTSET_COMMIT Idle rw
 ALIGNMENT_POINTSET_COMMIT='Off'
2016-10-19T12:27:48: Driver indi_eqmod_telescope: read defSwitchVector EQMod Mount ALIGNMENT_SUBSYSTEM_MATH_PLUGINS Idle rw
 INBUILT_MATH_PLUGIN='On'
 SVD Math Plugin='Off'
2016-10-19T12:27:48: Driver indi_eqmod_telescope: read defSwitchVector EQMod Mount ALIGNMENT_SUBSYSTEM_MATH_PLUGIN_INITIALISE Idle rw
 ALIGNMENT_SUBSYSTEM_MATH_PLUGIN_INITIALISE='Off'
2016-10-19T12:27:48: Driver indi_eqmod_telescope: read defSwitchVector EQMod Mount ALIGNMENT_SUBSYSTEM_ACTIVE Idle rw
 ALIGNMENT SUBSYSTEM ACTIVE='On'
2016-10-19T12:27:48: Driver indi_eqmod_telescope: read defSwitchVector EQMod Mount CONFIG_PROCESS Idle rw
 CONFIG_LOAD='Off'
 CONFIG_SAVE='Off'
 CONFIG_DEFAULT='Off'
2016-10-19T12:27:48: Driver indi_eqmod_telescope: read defTextVector EQMod Mount DEVICE_PORT Idle rw
       PORT='/dev/ttyUSB0'
2016-10-19T12:27:48: Driver indi_eqmod_telescope: read setTextVector EQMod Mount DEVICE_PORT Ok
       PORT='/dev/mount'
2016-10-19T12:27:48: Driver indi_eqmod_telescope: read defSwitchVector EQMod Mount TELESCOPE_BAUD_RATE Idle rw
       9600='On'
      19200='Off'
      38400='Off'
      57600='Off'
     115200='Off'
     230400='Off'
2016-10-19T12:27:48: Driver indi_eqmod_telescope: read setSwitchVector EQMod Mount TELESCOPE_BAUD_RATE Ok
       9600='On'
      19200='Off'
      38400='Off'
      57600='Off'
     115200='Off'
     230400='Off'
2016-10-19T12:27:48: Driver indi_eqmod_telescope: read defTextVector EQMod Mount ACTIVE_DEVICES Idle rw
 ACTIVE_GPS='GPS Simulator'
2016-10-19T12:27:48: Driver indi_eqmod_telescope: read setTextVector EQMod Mount ACTIVE_DEVICES Ok
 ACTIVE_GPS='GPS Simulator'
2016-10-19T12:27:48: Driver indi_eqmod_telescope: read getProperties GPS Simulator GEOGRAPHIC_COORD 
2016-10-19T12:27:48: Driver indi_eqmod_telescope: read getProperties GPS Simulator TIME_UTC 
2016-10-19T12:28:08: Client 0: new arrival from 192.168.178.47:37878 - welcome!
2016-10-19T12:28:08: Client 0: read getProperties   
2016-10-19T12:28:08: Driver indi_simulator_ccd: queuing responsible for <getProperties device='' name=''>
2016-10-19T12:28:08: Driver indi_eqmod_telescope: queuing responsible for <getProperties device='' name=''>
2016-10-19T12:28:08: Driver indi_simulator_ccd: sending msg copy 2 nq 1:
<getProperties version="1.7"/>

2016-10-19T12:28:08: Driver indi_eqmod_telescope: sending msg copy 1 nq 1:
<getProperties version="1.7"/>

2016-10-19T12:28:08: Driver indi_simulator_ccd: read defSwitchVector CCD Simulator CONNECTION Idle rw
    CONNECT='Off'
 DISCONNECT='On'
2016-10-19T12:28:08: Client 0: queuing <defSwitchVector device='CCD Simulator' name='CONNECTION'>
2016-10-19T12:28:08: Driver indi_simulator_ccd: read defTextVector CCD Simulator DRIVER_INFO Idle ro
 DRIVER_NAME='CCD Simulator'
 DRIVER_EXEC='indi_simulator_ccd'
 DRIVER_VERSION='1.0'
 DRIVER_INTERFACE='22'
2016-10-19T12:28:08: Client 0: queuing <defTextVector device='CCD Simulator' name='DRIVER_INFO'>
2016-10-19T12:28:08: Driver indi_simulator_ccd: read defSwitchVector CCD Simulator DEBUG Idle rw
     ENABLE='Off'
    DISABLE='On'
2016-10-19T12:28:08: Client 0: queuing <defSwitchVector device='CCD Simulator' name='DEBUG'>
2016-10-19T12:28:08: Driver indi_simulator_ccd: read defSwitchVector CCD Simulator CONFIG_PROCESS Idle rw
 CONFIG_LOAD='Off'
 CONFIG_SAVE='Off'
 CONFIG_DEFAULT='Off'
2016-10-19T12:28:08: Client 0: queuing <defSwitchVector device='CCD Simulator' name='CONFIG_PROCESS'>
2016-10-19T12:28:08: Driver indi_simulator_ccd: read defTextVector CCD Simulator ACTIVE_DEVICES Ok rw
 ACTIVE_TELESCOPE='Telescope Simulator'
 ACTIVE_FOCUSER='Focuser Simulator'
 ACTIVE_FILTER='CCD Simulator'
2016-10-19T12:28:08: Client 0: queuing <defTextVector device='CCD Simulator' name='ACTIVE_DEVICES'>
2016-10-19T12:28:08: Driver indi_simulator_ccd: read defNumberVector CCD Simulator SIMULATOR_SETTINGS Idle rw
   SIM_XRES='1280'
   SIM_YRES='1024'
  SIM_XSIZE='5.2000000000000001776'
  SIM_YSIZE='5.2000000000000001776'
 SIM_MAXVAL='65000'
   SIM_BIAS='10'
 SIM_SATURATION='1'
 SIM_LIMITINGMAG='17'
  SIM_NOISE='10'
 SIM_SKYGLOW='19.5'
 SIM_OAGOFFSET='0'
  SIM_POLAR='0'
 SIM_POLARDRIFT='0'
 SIM_ROTATION='0'
2016-10-19T12:28:08: Client 0: queuing <defNumberVector device='CCD Simulator' name='SIMULATOR_SETTINGS'>
2016-10-19T12:28:08: Driver indi_simulator_ccd: read defSwitchVector CCD Simulator ON_TIME_FACTOR Idle rw
         1X='On'
        10X='Off'
       100X='Off'
2016-10-19T12:28:08: Client 0: queuing <defSwitchVector device='CCD Simulator' name='ON_TIME_FACTOR'>
2016-10-19T12:28:08: Driver indi_simulator_ccd: read defTextVector CCD Simulator ACTIVE_DEVICES Ok rw
 ACTIVE_TELESCOPE='Telescope Simulator'
 ACTIVE_FOCUSER='Focuser Simulator'
 ACTIVE_FILTER='CCD Simulator'
2016-10-19T12:28:08: Client 0: queuing <defTextVector device='CCD Simulator' name='ACTIVE_DEVICES'>
2016-10-19T12:28:08: Driver indi_simulator_ccd: read setTextVector CCD Simulator ACTIVE_DEVICES Ok
 ACTIVE_TELESCOPE='Telescope Simulator'
 ACTIVE_FOCUSER='Focuser Simulator'
 ACTIVE_FILTER='CCD Simulator'
2016-10-19T12:28:08: Client 0: queuing <setTextVector device='CCD Simulator' name='ACTIVE_DEVICES'>
2016-10-19T12:28:08: Driver indi_simulator_ccd: read getProperties Telescope Simulator EQUATORIAL_EOD_COORD 
2016-10-19T12:28:08: Driver indi_simulator_ccd: read getProperties Telescope Simulator TELESCOPE_INFO 
2016-10-19T12:28:08: Driver indi_simulator_ccd: read getProperties CCD Simulator FILTER_SLOT 
2016-10-19T12:28:08: Driver indi_simulator_ccd: read getProperties CCD Simulator FILTER_NAME 
2016-10-19T12:28:08: Driver indi_simulator_ccd: read getProperties Telescope Simulator EQUATORIAL_PE 
2016-10-19T12:28:08: Driver indi_simulator_ccd: read getProperties Focuser Simulator FWHM 
2016-10-19T12:28:08: Driver indi_simulator_ccd: read defNumberVector CCD Simulator SIMULATOR_SETTINGS Idle rw
   SIM_XRES='1280'
   SIM_YRES='1024'
  SIM_XSIZE='5.2000000000000001776'
  SIM_YSIZE='5.2000000000000001776'
 SIM_MAXVAL='65000'
   SIM_BIAS='10'
 SIM_SATURATION='1'
 SIM_LIMITINGMAG='17'
  SIM_NOISE='10'
 SIM_SKYGLOW='19.5'
 SIM_OAGOFFSET='0'
  SIM_POLAR='0'
 SIM_POLARDRIFT='0'
 SIM_ROTATION='0'
2016-10-19T12:28:08: Client 0: queuing <defNumberVector device='CCD Simulator' name='SIMULATOR_SETTINGS'>
2016-10-19T12:28:08: Driver indi_simulator_ccd: read defSwitchVector CCD Simulator ON_TIME_FACTOR Idle rw
         1X='On'
        10X='Off'
       100X='Off'
2016-10-19T12:28:08: Client 0: queuing <defSwitchVector device='CCD Simulator' name='ON_TIME_FACTOR'>
2016-10-19T12:28:08: Driver indi_eqmod_telescope: read defSwitchVector EQMod Mount CONNECTION Idle rw
    CONNECT='Off'
 DISCONNECT='On'
2016-10-19T12:28:08: Client 0: queuing <defSwitchVector device='EQMod Mount' name='CONNECTION'>
2016-10-19T12:28:08: Driver indi_eqmod_telescope: read defTextVector EQMod Mount DRIVER_INFO Idle ro
 DRIVER_NAME='EQMod Mount'
 DRIVER_EXEC='indi_eqmod_telescope'
 DRIVER_VERSION='0.3'
 DRIVER_INTERFACE='5'
2016-10-19T12:28:08: Client 0: queuing <defTextVector device='EQMod Mount' name='DRIVER_INFO'>
2016-10-19T12:28:08: Driver indi_eqmod_telescope: read defNumberVector EQMod Mount ALIGNMENT_POINT_MANDATORY_NUMBERS Idle rw
 ALIGNMENT_POINT_ENTRY_OBSERVATION_JULIAN_DATE='0'
 ALIGNMENT_POINT_ENTRY_RA='0'
  ALIGNMENT_POINT_ENTRY_DEC='0'
 ALIGNMENT_POINT_ENTRY_VECTOR_X='0'
  ALIGNMENT_POINT_ENTRY_VECTOR_Y='0'
  ALIGNMENT_POINT_ENTRY_VECTOR_Z='0'
2016-10-19T12:28:08: Client 0: queuing <defNumberVector device='EQMod Mount' name='ALIGNMENT_POINT_MANDATORY_NUMBERS'>
2016-10-19T12:28:08: Driver indi_eqmod_telescope: read defBLOBVector EQMod Mount ALIGNMENT_POINT_OPTIONAL_BINARY_BLOB Idle rw
2016-10-19T12:28:08: Client 0: queuing <defBLOBVector device='EQMod Mount' name='ALIGNMENT_POINT_OPTIONAL_BINARY_BLOB'>
2016-10-19T12:28:08: Driver indi_eqmod_telescope: read defNumberVector EQMod Mount ALIGNMENT_POINTSET_SIZE Idle ro
 ALIGNMENT_POINTSET_SIZE='0'
2016-10-19T12:28:08: Client 0: queuing <defNumberVector device='EQMod Mount' name='ALIGNMENT_POINTSET_SIZE'>
2016-10-19T12:28:08: Driver indi_eqmod_telescope: read defNumberVector EQMod Mount ALIGNMENT_POINTSET_CURRENT_ENTRY Idle rw
 ALIGNMENT_POINTSET_CURRENT_ENTRY='0'
2016-10-19T12:28:08: Client 0: queuing <defNumberVector device='EQMod Mount' name='ALIGNMENT_POINTSET_CURRENT_ENTRY'>
2016-10-19T12:28:08: Driver indi_eqmod_telescope: read defSwitchVector EQMod Mount ALIGNMENT_POINTSET_ACTION Idle rw
     APPEND='On'
     INSERT='Off'
       EDIT='Off'
     DELETE='Off'
      CLEAR='Off'
       READ='Off'
 READ INCREMENT='Off'
 LOAD DATABASE='Off'
 SAVE DATABASE='Off'
2016-10-19T12:28:08: Client 0: queuing <defSwitchVector device='EQMod Mount' name='ALIGNMENT_POINTSET_ACTION'>
2016-10-19T12:28:08: Driver indi_eqmod_telescope: read defSwitchVector EQMod Mount ALIGNMENT_POINTSET_COMMIT Idle rw
 ALIGNMENT_POINTSET_COMMIT='Off'
2016-10-19T12:28:08: Client 0: queuing <defSwitchVector device='EQMod Mount' name='ALIGNMENT_POINTSET_COMMIT'>
2016-10-19T12:28:08: Driver indi_eqmod_telescope: read defSwitchVector EQMod Mount ALIGNMENT_SUBSYSTEM_MATH_PLUGINS Idle rw
 INBUILT_MATH_PLUGIN='On'
 SVD Math Plugin='Off'
2016-10-19T12:28:08: Client 0: queuing <defSwitchVector device='EQMod Mount' name='ALIGNMENT_SUBSYSTEM_MATH_PLUGINS'>
2016-10-19T12:28:08: Driver indi_eqmod_telescope: read defSwitchVector EQMod Mount ALIGNMENT_SUBSYSTEM_MATH_PLUGIN_INITIALISE Idle rw
 ALIGNMENT_SUBSYSTEM_MATH_PLUGIN_INITIALISE='Off'
2016-10-19T12:28:08: Client 0: queuing <defSwitchVector device='EQMod Mount' name='ALIGNMENT_SUBSYSTEM_MATH_PLUGIN_INITIALISE'>
2016-10-19T12:28:08: Driver indi_eqmod_telescope: read defSwitchVector EQMod Mount ALIGNMENT_SUBSYSTEM_ACTIVE Idle rw
 ALIGNMENT SUBSYSTEM ACTIVE='On'
2016-10-19T12:28:08: Client 0: queuing <defSwitchVector device='EQMod Mount' name='ALIGNMENT_SUBSYSTEM_ACTIVE'>
2016-10-19T12:28:08: Driver indi_eqmod_telescope: read defSwitchVector EQMod Mount CONFIG_PROCESS Idle rw
 CONFIG_LOAD='Off'
 CONFIG_SAVE='Off'
 CONFIG_DEFAULT='Off'
2016-10-19T12:28:08: Client 0: queuing <defSwitchVector device='EQMod Mount' name='CONFIG_PROCESS'>
2016-10-19T12:28:08: Driver indi_eqmod_telescope: read defTextVector EQMod Mount DEVICE_PORT Ok rw
       PORT='/dev/mount'
2016-10-19T12:28:08: Client 0: queuing <defTextVector device='EQMod Mount' name='DEVICE_PORT'>
2016-10-19T12:28:08: Driver indi_eqmod_telescope: read defSwitchVector EQMod Mount TELESCOPE_BAUD_RATE Ok rw
       9600='On'
      19200='Off'
      38400='Off'
      57600='Off'
     115200='Off'
     230400='Off'
2016-10-19T12:28:08: Client 0: queuing <defSwitchVector device='EQMod Mount' name='TELESCOPE_BAUD_RATE'>
2016-10-19T12:28:08: Driver indi_eqmod_telescope: read defTextVector EQMod Mount ACTIVE_DEVICES Ok rw
 ACTIVE_GPS='GPS Simulator'
2016-10-19T12:28:08: Client 0: queuing <defTextVector device='EQMod Mount' name='ACTIVE_DEVICES'>
2016-10-19T12:28:08: Driver indi_eqmod_telescope: read defSwitchVector EQMod Mount DEBUG Idle rw
     ENABLE='Off'
    DISABLE='On'
2016-10-19T12:28:08: Client 0: queuing <defSwitchVector device='EQMod Mount' name='DEBUG'>
2016-10-19T12:28:08: Driver indi_eqmod_telescope: read defSwitchVector EQMod Mount SIMULATION Idle rw
     ENABLE='Off'
    DISABLE='On'
2016-10-19T12:28:08: Client 0: queuing <defSwitchVector device='EQMod Mount' name='SIMULATION'>
2016-10-19T12:28:08: Driver indi_eqmod_telescope: read defTextVector EQMod Mount DEVICE_PORT Ok rw
       PORT='/dev/mount'
2016-10-19T12:28:08: Client 0: queuing <defTextVector device='EQMod Mount' name='DEVICE_PORT'>
2016-10-19T12:28:08: Driver indi_eqmod_telescope: read setTextVector EQMod Mount DEVICE_PORT Ok
       PORT='/dev/mount'
2016-10-19T12:28:08: Client 0: queuing <setTextVector device='EQMod Mount' name='DEVICE_PORT'>
2016-10-19T12:28:08: Driver indi_eqmod_telescope: read defSwitchVector EQMod Mount TELESCOPE_BAUD_RATE Ok rw
       9600='On'
      19200='Off'
      38400='Off'
      57600='Off'
     115200='Off'
     230400='Off'
2016-10-19T12:28:08: Client 0: queuing <defSwitchVector device='EQMod Mount' name='TELESCOPE_BAUD_RATE'>
2016-10-19T12:28:08: Driver indi_eqmod_telescope: read setSwitchVector EQMod Mount TELESCOPE_BAUD_RATE Ok
       9600='On'
      19200='Off'
      38400='Off'
      57600='Off'
     115200='Off'
     230400='Off'
2016-10-19T12:28:08: Client 0: queuing <setSwitchVector device='EQMod Mount' name='TELESCOPE_BAUD_RATE'>
2016-10-19T12:28:08: Driver indi_eqmod_telescope: read defTextVector EQMod Mount ACTIVE_DEVICES Ok rw
 ACTIVE_GPS='GPS Simulator'
2016-10-19T12:28:08: Client 0: queuing <defTextVector device='EQMod Mount' name='ACTIVE_DEVICES'>
2016-10-19T12:28:08: Driver indi_eqmod_telescope: read setTextVector EQMod Mount ACTIVE_DEVICES Ok
 ACTIVE_GPS='GPS Simulator'
2016-10-19T12:28:08: Client 0: queuing <setTextVector device='EQMod Mount' name='ACTIVE_DEVICES'>
2016-10-19T12:28:08: Driver indi_eqmod_telescope: read getProperties GPS Simulator GEOGRAPHIC_COORD 
2016-10-19T12:28:08: Driver indi_eqmod_telescope: read getProperties GPS Simulator TIME_UTC 
2016-10-19T12:28:08: Client 0: sending msg copy 1 nq 34:
<defSwitchVector device="CCD Simulator" name="CONNECTION" label="Connection" group="Main Control" state="Idle" perm="rw" rule="OneOfMany" timeout="60" timestamp="2016-10-19T12:28:08">
    <defSwitch name="CONNECT" label="Connect">
Off
    </defSwitch>
    <defSwitch name="DISCONNECT" label="Disconnect">
On
    </defSwitch>
</defSwitchVector>

2016-10-19T12:28:08: Client 0: sending msg copy 1 nq 33:
<defTextVector device="CCD Simulator" name="DRIVER_INFO" label="Driver Info" group="Options" state="Idle" perm="ro" timeout="60" timestamp="2016-10-19T12:28:08">
    <defText name="DRIVER_NAME" label="Name">
CCD Simulator
    </defText>
    <defText name="DRIVER_EXEC" label="Exec">
indi_simulator_ccd
    </defText>
    <defText name="DRIVER_VERSION" label="Version">
1.0
    </defText>
    <defText name="DRIVER_INTERFACE" label="Interface">
22
    </defText>
</defTextVector>

2016-10-19T12:28:08: Client 0: sending msg copy 1 nq 32:
<defSwitchVector device="CCD Simulator" name="DEBUG" label="Debug" group="Options" state="Idle" perm="rw" rule="OneOfMany" timeout="0" timestamp="2016-10-19T12:28:08">
    <defSwitch name="ENABLE" label="Enable">
Off
    </defSwitch>
    <defSwitch name="DISABLE" label="Disable">
On
    </defSwitch>
</defSwitchVector>

2016-10-19T12:28:08: Client 0: sending msg copy 1 nq 31:
<defSwitchVector device="CCD Simulator" name="CONFIG_PROCESS" label="Configuration" group="Options" state="Idle" perm="rw" rule="AtMostOne" timeout="0" timestamp="2016-10-19T12:28:08">
    <defSwitch name="CONFIG_LOAD" label="Load">
Off
    </defSwitch>
    <defSwitch name="CONFIG_SAVE" label="Save">
Off
    </defSwitch>
    <defSwitch name="CONFIG_DEFAULT" label="Default">
Off
    </defSwitch>
</defSwitchVector>

2016-10-19T12:28:08: Client 0: sending msg copy 1 nq 30:
<defTextVector device="CCD Simulator" name="ACTIVE_DEVICES" label="Snoop devices" group="Options" state="Ok" perm="rw" timeout="60" timestamp="2016-10-19T12:28:08">
    <defText name="ACTIVE_TELESCOPE" label="Telescope">
Telescope Simulator
    </defText>
    <defText name="ACTIVE_FOCUSER" label="Focuser">
Focuser Simulator
    </defText>
    <defText name="ACTIVE_FILTER" label="Filter">
CCD Simulator
    </defText>
</defTextVector>

2016-10-19T12:28:08: Client 0: read enableBLOB CCD Simulator   Also
2016-10-19T12:28:08: Driver indi_simulator_ccd: queuing responsible for <enableBLOB device='CCD Simulator' name=''>
2016-10-19T12:28:08: Client 0: sending msg copy 1 nq 29:
<defNumberVector device="CCD Simulator" name="SIMULATOR_SETTINGS" label="Simulator Settings" group="Simulator Config" state="Idle" perm="rw" timeout="60" timestamp="2016-10-19T12:28:08">
    <defNumber name="SIM_XRES" label="CCD X resolution" format="%4.0f" min="0" max="2048" step="0">
1280
    </defNumber>
    <defNumber name="SIM_YRES" label="CCD Y resolution" format="%4.0f" min="0" max="2048" step="0">
1024
    </defNumber>
    <defNumber name="SIM_XSIZE" label="CCD X Pixel Size" format="%4.2f" min="0" max="60" step="0">
5.2000000000000001776
    </defNumber>
    <defNumber name="SIM_YSIZE" label="CCD Y Pixel Size" format="%4.2f" min="0" max="60" step="0">
5.2000000000000001776
    </defNumber>
    <defNumber name="SIM_MAXVAL" label="CCD Maximum ADU" format="%4.0f" min="0" max="65000" step="0">
65000
    </defNumber>
    <defNumber name="SIM_BIAS" label="CCD Bias" format="%4.0f" min="0" max="6000" step="0">
10
    </defNumber>
    <defNumber name="SIM_SATURATION" label="Saturation Mag" format="%4.1f" min="0" max="20" step="0">
1
    </defNumber>
    <defNumber name="SIM_LIMITINGMAG" label="Limiting Mag" format="%4.1f" min="0" max="20" step="0">
17
    </defNumber>
    <defNumber name="SIM_NOISE" label="CCD Noise" format="%4.0f" min="0" max="6000" step="0">
10
    </defNumber>
    <defNumber name="SIM_SKYGLOW" label="Sky Glow (magnitudes)" format="%4.1f" min="0" max="6000" step="0">
19.5
    </defNumber>
    <defNumber name="SIM_OAGOFFSET" label="Oag Offset (arcminutes)" format="%4.1f" min="0" max="6000" step="0">
0
    </defNumber>
    <defNumber name="SIM_POLAR" label="PAE (arcminutes)" format="%4.1f" min="-600" max="600" step="0">
0
    </defNumber>
    <defNumber name="SIM_POLARDRIFT" label="PAE Drift (minutes)" format="%4.1f" min="0" max="6000" step="0">
0
    </defNumber>
    <defNumber name="SIM_ROTATION" label="Rotation CW (degrees)" format="%4.1f" min="-360" max="360" step="0">
0
    </defNumber>
</defNumberVector>

2016-10-19T12:28:08: Client 0: sending msg copy 1 nq 28:
<defSwitchVector device="CCD Simulator" name="ON_TIME_FACTOR" label="Time Factor" group="Simulator Config" state="Idle" perm="rw" rule="OneOfMany" timeout="60" timestamp="2016-10-19T12:28:08">
    <defSwitch name="1X" label="Actual Time">
On
    </defSwitch>
    <defSwitch name="10X" label="10x">
Off
    </defSwitch>
    <defSwitch name="100X" label="100x">
Off
    </defSwitch>
</defSwitchVector>

2016-10-19T12:28:08: Driver indi_simulator_ccd: sending msg copy 1 nq 1:
<enableBLOB device="CCD Simulator">
Also
</enableBLOB>

2016-10-19T12:28:08: Client 0: sending msg copy 1 nq 27:
<defTextVector device="CCD Simulator" name="ACTIVE_DEVICES" label="Snoop devices" group="Options" state="Ok" perm="rw" timeout="60" timestamp="2016-10-19T12:28:08">
    <defText name="ACTIVE_TELESCOPE" label="Telescope">
Telescope Simulator
    </defText>
    <defText name="ACTIVE_FOCUSER" label="Focuser">
Focuser Simulator
    </defText>
    <defText name="ACTIVE_FILTER" label="Filter">
CCD Simulator
    </defText>
</defTextVector>

2016-10-19T12:28:08: Client 0: sending msg copy 1 nq 26:
<setTextVector device="CCD Simulator" name="ACTIVE_DEVICES" state="Ok" timeout="60" timestamp="2016-10-19T12:28:08">
    <oneText name="ACTIVE_TELESCOPE">
Telescope Simulator
    </oneText>
    <oneText name="ACTIVE_FOCUSER">
Focuser Simulator
    </oneText>
    <oneText name="ACTIVE_FILTER">
CCD Simulator
    </oneText>
</setTextVector>

2016-10-19T12:28:08: Client 0: sending msg copy 1 nq 25:
<defNumberVector device="CCD Simulator" name="SIMULATOR_SETTINGS" label="Simulator Settings" group="Simulator Config" state="Idle" perm="rw" timeout="60" timestamp="2016-10-19T12:28:08">
    <defNumber name="SIM_XRES" label="CCD X resolution" format="%4.0f" min="0" max="2048" step="0">
1280
    </defNumber>
    <defNumber name="SIM_YRES" label="CCD Y resolution" format="%4.0f" min="0" max="2048" step="0">
1024
    </defNumber>
    <defNumber name="SIM_XSIZE" label="CCD X Pixel Size" format="%4.2f" min="0" max="60" step="0">
5.2000000000000001776
    </defNumber>
    <defNumber name="SIM_YSIZE" label="CCD Y Pixel Size" format="%4.2f" min="0" max="60" step="0">
5.2000000000000001776
    </defNumber>
    <defNumber name="SIM_MAXVAL" label="CCD Maximum ADU" format="%4.0f" min="0" max="65000" step="0">
65000
    </defNumber>
    <defNumber name="SIM_BIAS" label="CCD Bias" format="%4.0f" min="0" max="6000" step="0">
10
    </defNumber>
    <defNumber name="SIM_SATURATION" label="Saturation Mag" format="%4.1f" min="0" max="20" step="0">
1
    </defNumber>
    <defNumber name="SIM_LIMITINGMAG" label="Limiting Mag" format="%4.1f" min="0" max="20" step="0">
17
    </defNumber>
    <defNumber name="SIM_NOISE" label="CCD Noise" format="%4.0f" min="0" max="6000" step="0">
10
    </defNumber>
    <defNumber name="SIM_SKYGLOW" label="Sky Glow (magnitudes)" format="%4.1f" min="0" max="6000" step="0">
19.5
    </defNumber>
    <defNumber name="SIM_OAGOFFSET" label="Oag Offset (arcminutes)" format="%4.1f" min="0" max="6000" step="0">
0
    </defNumber>
    <defNumber name="SIM_POLAR" label="PAE (arcminutes)" format="%4.1f" min="-600" max="600" step="0">
0
    </defNumber>
    <defNumber name="SIM_POLARDRIFT" label="PAE Drift (minutes)" format="%4.1f" min="0" max="6000" step="0">
0
    </defNumber>
    <defNumber name="SIM_ROTATION" label="Rotation CW (degrees)" format="%4.1f" min="-360" max="360" step="0">
0
    </defNumber>
</defNumberVector>

2016-10-19T12:28:08: Client 0: sending msg copy 1 nq 24:
<defSwitchVector device="CCD Simulator" name="ON_TIME_FACTOR" label="Time Factor" group="Simulator Config" state="Idle" perm="rw" rule="OneOfMany" timeout="60" timestamp="2016-10-19T12:28:08">
    <defSwitch name="1X" label="Actual Time">
On
    </defSwitch>
    <defSwitch name="10X" label="10x">
Off
    </defSwitch>
    <defSwitch name="100X" label="100x">
Off
    </defSwitch>
</defSwitchVector>

2016-10-19T12:28:08: Client 0: sending msg copy 1 nq 23:
<defSwitchVector device="EQMod Mount" name="CONNECTION" label="Connection" group="Main Control" state="Idle" perm="rw" rule="OneOfMany" timeout="60" timestamp="2016-10-19T12:28:08">
    <defSwitch name="CONNECT" label="Connect">
Off
    </defSwitch>
    <defSwitch name="DISCONNECT" label="Disconnect">
On
    </defSwitch>
</defSwitchVector>

2016-10-19T12:28:08: Client 0: sending msg copy 1 nq 22:
<defTextVector device="EQMod Mount" name="DRIVER_INFO" label="Driver Info" group="Options" state="Idle" perm="ro" timeout="60" timestamp="2016-10-19T12:28:08">
    <defText name="DRIVER_NAME" label="Name">
EQMod Mount
    </defText>
    <defText name="DRIVER_EXEC" label="Exec">
indi_eqmod_telescope
    </defText>
    <defText name="DRIVER_VERSION" label="Version">
0.3
    </defText>
    <defText name="DRIVER_INTERFACE" label="Interface">
5
    </defText>
</defTextVector>

2016-10-19T12:28:08: Client 0: sending msg copy 1 nq 21:
<defNumberVector device="EQMod Mount" name="ALIGNMENT_POINT_MANDATORY_NUMBERS" label="Mandatory sync point numeric fields" group="Alignment" state="Idle" perm="rw" timeout="60" timestamp="2016-10-19T12:28:08">
    <defNumber name="ALIGNMENT_POINT_ENTRY_OBSERVATION_JULIAN_DATE" label="Observation Julian date" format="%g" min="0" max="60000" step="0">
0
    </defNumber>
    <defNumber name="ALIGNMENT_POINT_ENTRY_RA" label="Right Ascension (hh:mm:ss)" format="%010.6m" min="0" max="24" step="0">
0
    </defNumber>
    <defNumber name=" ALIGNMENT_POINT_ENTRY_DEC" label="Declination (dd:mm:ss)" format="%010.6m" min="-90" max="90" step="0">
0
    </defNumber>
    <defNumber name="ALIGNMENT_POINT_ENTRY_VECTOR_X" label="Telescope direction vector x" format="%g" min="-3.4028234663852885981e+38" max="3.4028234663852885981e+38" step="0">
0
    </defNumber>
    <defNumber name=" ALIGNMENT_POINT_ENTRY_VECTOR_Y" label="Telescope direction vector y" format="%g" min="-3.4028234663852885981e+38" max="3.4028234663852885981e+38" step="0">
0
    </defNumber>
    <defNumber name=" ALIGNMENT_POINT_ENTRY_VECTOR_Z" label="Telescope direction vector z" format="%g" min="-3.4028234663852885981e+38" max="3.4028234663852885981e+38" step="0">
0
    </defNumber>
</defNumberVector>

2016-10-19T12:28:08: Client 0: sending msg copy 1 nq 20:
<defBLOBVector device="EQMod Mount" name="ALIGNMENT_POINT_OPTIONAL_BINARY_BLOB" label="Optional sync point binary data" group="Alignment" state="Idle" perm="rw" timeout="60" timestamp="2016-10-19T12:28:08">
    <defBLOB name="ALIGNMENT_POINT_ENTRY_PRIVATE" label="Private binary data"/>
</defBLOBVector>

2016-10-19T12:28:08: Client 0: sending msg copy 1 nq 19:
<defNumberVector device="EQMod Mount" name="ALIGNMENT_POINTSET_SIZE" label="Current Set" group="Alignment" state="Idle" perm="ro" timeout="60" timestamp="2016-10-19T12:28:08">
    <defNumber name="ALIGNMENT_POINTSET_SIZE" label="Size" format="%g" min="0" max="100000" step="0">
0
    </defNumber>
</defNumberVector>

2016-10-19T12:28:08: Client 0: sending msg copy 1 nq 18:
<defNumberVector device="EQMod Mount" name="ALIGNMENT_POINTSET_CURRENT_ENTRY" label="Current Set" group="Alignment" state="Idle" perm="rw" timeout="60" timestamp="2016-10-19T12:28:08">
    <defNumber name="ALIGNMENT_POINTSET_CURRENT_ENTRY" label="Pointer" format="%g" min="0" max="100000" step="0">
0
    </defNumber>
</defNumberVector>

2016-10-19T12:28:08: Client 0: sending msg copy 1 nq 17:
<defSwitchVector device="EQMod Mount" name="ALIGNMENT_POINTSET_ACTION" label="Action to take" group="Alignment" state="Idle" perm="rw" rule="OneOfMany" timeout="60" timestamp="2016-10-19T12:28:08">
    <defSwitch name="APPEND" label="Add entries at end of set">
On
    </defSwitch>
    <defSwitch name="INSERT" label="Insert entries at current index">
Off
    </defSwitch>
    <defSwitch name="EDIT" label="Overwrite entry at current index">
Off
    </defSwitch>
    <defSwitch name="DELETE" label="Delete entry at current index">
Off
    </defSwitch>
    <defSwitch name="CLEAR" label="Delete all the entries in the set">
Off
    </defSwitch>
    <defSwitch name="READ" label="Read the entry at the current pointer">
Off
    </defSwitch>
    <defSwitch name="READ INCREMENT" label="Increment the pointer before reading the entry">
Off
    </defSwitch>
    <defSwitch name="LOAD DATABASE" label="Load the alignment database from local storage">
Off
    </defSwitch>
    <defSwitch name="SAVE DATABASE" label="Save the alignment database to local storage">
Off
    </defSwitch>
</defSwitchVector>

2016-10-19T12:28:08: Client 0: sending msg copy 1 nq 16:
<defSwitchVector device="EQMod Mount" name="ALIGNMENT_POINTSET_COMMIT" label="Execute the action" group="Alignment" state="Idle" perm="rw" rule="AtMostOne" timeout="60" timestamp="2016-10-19T12:28:08">
    <defSwitch name="ALIGNMENT_POINTSET_COMMIT" label="OK">
Off
    </defSwitch>
</defSwitchVector>

2016-10-19T12:28:08: Client 0: sending msg copy 1 nq 15:
<defSwitchVector device="EQMod Mount" name="ALIGNMENT_SUBSYSTEM_MATH_PLUGINS" label="Math Plugins" group="Alignment" state="Idle" perm="rw" rule="OneOfMany" timeout="60" timestamp="2016-10-19T12:28:08">
    <defSwitch name="INBUILT_MATH_PLUGIN" label="Inbuilt Math Plugin">
On
    </defSwitch>
    <defSwitch name="SVD Math Plugin" label="SVD Math Plugin">
Off
    </defSwitch>
</defSwitchVector>

2016-10-19T12:28:08: Client 0: sending msg copy 1 nq 14:
<defSwitchVector device="EQMod Mount" name="ALIGNMENT_SUBSYSTEM_MATH_PLUGIN_INITIALISE" label="(Re)Initialise Plugin" group="Alignment" state="Idle" perm="rw" rule="AtMostOne" timeout="60" timestamp="2016-10-19T12:28:08">
    <defSwitch name="ALIGNMENT_SUBSYSTEM_MATH_PLUGIN_INITIALISE" label="OK">
Off
    </defSwitch>
</defSwitchVector>

2016-10-19T12:28:08: Client 0: sending msg copy 1 nq 13:
<defSwitchVector device="EQMod Mount" name="ALIGNMENT_SUBSYSTEM_ACTIVE" label="Activate alignment subsystem" group="Alignment" state="Idle" perm="rw" rule="AtMostOne" timeout="60" timestamp="2016-10-19T12:28:08">
    <defSwitch name="ALIGNMENT SUBSYSTEM ACTIVE" label="Alignment Subsystem Active">
On
    </defSwitch>
</defSwitchVector>

2016-10-19T12:28:08: Client 0: sending msg copy 1 nq 12:
<defSwitchVector device="EQMod Mount" name="CONFIG_PROCESS" label="Configuration" group="Options" state="Idle" perm="rw" rule="AtMostOne" timeout="0" timestamp="2016-10-19T12:28:08">
    <defSwitch name="CONFIG_LOAD" label="Load">
Off
    </defSwitch>
    <defSwitch name="CONFIG_SAVE" label="Save">
Off
    </defSwitch>
    <defSwitch name="CONFIG_DEFAULT" label="Default">
Off
    </defSwitch>
</defSwitchVector>

2016-10-19T12:28:08: Client 0: sending msg copy 1 nq 11:
<defTextVector device="EQMod Mount" name="DEVICE_PORT" label="Ports" group="Options" state="Ok" perm="rw" timeout="60" timestamp="2016-10-19T12:28:08">
    <defText name="PORT" label="Port">
/dev/mount
    </defText>
</defTextVector>

2016-10-19T12:28:08: Client 0: sending msg copy 1 nq 10:
<defSwitchVector device="EQMod Mount" name="TELESCOPE_BAUD_RATE" label="Baud Rate" group="Options" state="Ok" perm="rw" rule="OneOfMany" timeout="60" timestamp="2016-10-19T12:28:08">
    <defSwitch name="9600" label="9600">
On
    </defSwitch>
    <defSwitch name="19200" label="19200">
Off
    </defSwitch>
    <defSwitch name="38400" label="38400">
Off
    </defSwitch>
    <defSwitch name="57600" label="57600">
Off
    </defSwitch>
    <defSwitch name="115200" label="115200">
Off
    </defSwitch>
    <defSwitch name="230400" label="230400">
Off
    </defSwitch>
</defSwitchVector>

2016-10-19T12:28:08: Client 0: sending msg copy 1 nq 9:
<defTextVector device="EQMod Mount" name="ACTIVE_DEVICES" label="Snoop devices" group="Options" state="Ok" perm="rw" timeout="60" timestamp="2016-10-19T12:28:08">
    <defText name="ACTIVE_GPS" label="GPS">
GPS Simulator
    </defText>
</defTextVector>

2016-10-19T12:28:08: Client 0: sending msg copy 1 nq 8:
<defSwitchVector device="EQMod Mount" name="DEBUG" label="Debug" group="Options" state="Idle" perm="rw" rule="OneOfMany" timeout="0" timestamp="2016-10-19T12:28:08">
    <defSwitch name="ENABLE" label="Enable">
Off
    </defSwitch>
    <defSwitch name="DISABLE" label="Disable">
On
    </defSwitch>
</defSwitchVector>

2016-10-19T12:28:08: Client 0: sending msg copy 1 nq 7:
<defSwitchVector device="EQMod Mount" name="SIMULATION" label="Simulation" group="Options" state="Idle" perm="rw" rule="OneOfMany" timeout="0" timestamp="2016-10-19T12:28:08">
    <defSwitch name="ENABLE" label="Enable">
Off
    </defSwitch>
    <defSwitch name="DISABLE" label="Disable">
On
    </defSwitch>
</defSwitchVector>

2016-10-19T12:28:08: Client 0: sending msg copy 1 nq 6:
<defTextVector device="EQMod Mount" name="DEVICE_PORT" label="Ports" group="Options" state="Ok" perm="rw" timeout="60" timestamp="2016-10-19T12:28:08">
    <defText name="PORT" label="Port">
/dev/mount
    </defText>
</defTextVector>

2016-10-19T12:28:08: Client 0: sending msg copy 1 nq 5:
<setTextVector device="EQMod Mount" name="DEVICE_PORT" state="Ok" timeout="60" timestamp="2016-10-19T12:28:08">
    <oneText name="PORT">
/dev/mount
    </oneText>
</setTextVector>

2016-10-19T12:28:08: Client 0: sending msg copy 1 nq 4:
<defSwitchVector device="EQMod Mount" name="TELESCOPE_BAUD_RATE" label="Baud Rate" group="Options" state="Ok" perm="rw" rule="OneOfMany" timeout="60" timestamp="2016-10-19T12:28:08">
    <defSwitch name="9600" label="9600">
On
    </defSwitch>
    <defSwitch name="19200" label="19200">
Off
    </defSwitch>
    <defSwitch name="38400" label="38400">
Off
    </defSwitch>
    <defSwitch name="57600" label="57600">
Off
    </defSwitch>
    <defSwitch name="115200" label="115200">
Off
    </defSwitch>
    <defSwitch name="230400" label="230400">
Off
    </defSwitch>
</defSwitchVector>

2016-10-19T12:28:08: Client 0: sending msg copy 1 nq 3:
<setSwitchVector device="EQMod Mount" name="TELESCOPE_BAUD_RATE" state="Ok" timeout="60" timestamp="2016-10-19T12:28:08">
    <oneSwitch name="9600">
On
    </oneSwitch>
    <oneSwitch name="19200">
Off
    </oneSwitch>
    <oneSwitch name="38400">
Off
    </oneSwitch>
    <oneSwitch name="57600">
Off
    </oneSwitch>
    <oneSwitch name="115200">
Off
    </oneSwitch>
    <oneSwitch name="230400">
Off
    </oneSwitch>
</setSwitchVector>

2016-10-19T12:28:08: Client 0: sending msg copy 1 nq 2:
<defTextVector device="EQMod Mount" name="ACTIVE_DEVICES" label="Snoop devices" group="Options" state="Ok" perm="rw" timeout="60" timestamp="2016-10-19T12:28:08">
    <defText name="ACTIVE_GPS" label="GPS">
GPS Simulator
    </defText>
</defTextVector>

2016-10-19T12:28:08: Client 0: sending msg copy 1 nq 1:
<setTextVector device="EQMod Mount" name="ACTIVE_DEVICES" state="Ok" timeout="60" timestamp="2016-10-19T12:28:08">
    <oneText name="ACTIVE_GPS">
GPS Simulator
    </oneText>
</setTextVector>

2016-10-19T12:28:08: Client 0: read enableBLOB EQMod Mount   Also
2016-10-19T12:28:08: Driver indi_eqmod_telescope: queuing responsible for <enableBLOB device='EQMod Mount' name=''>
2016-10-19T12:28:08: Driver indi_eqmod_telescope: sending msg copy 1 nq 1:
<enableBLOB device="EQMod Mount">
Also
</enableBLOB>

2016-10-19T12:28:14: Client 0: read newSwitchVector EQMod Mount DEBUG 
     ENABLE='On'
2016-10-19T12:28:14: Driver indi_eqmod_telescope: queuing responsible for <newSwitchVector device='EQMod Mount' name='DEBUG'>
2016-10-19T12:28:14: Driver indi_eqmod_telescope: sending msg copy 1 nq 1:
<newSwitchVector device="EQMod Mount" name="DEBUG">
    <oneSwitch name="ENABLE">
On
    </oneSwitch>
</newSwitchVector>

2016-10-19T12:28:14: Driver indi_eqmod_telescope: read message EQMod Mount   'Debug is enabled.'
2016-10-19T12:28:14: Client 0: queuing <message device='EQMod Mount' name=''>
2016-10-19T12:28:14: Driver indi_eqmod_telescope: read defSwitchVector EQMod Mount DEBUG_LEVEL Idle rw
  DBG_ERROR='On'
 DBG_WARNING='On'
 DBG_SESSION='On'
  DBG_DEBUG='Off'
 DBG_EXTRA_1='Off'
 DBG_EXTRA_2='Off'
 DBG_EXTRA_3='Off'
 DBG_EXTRA_4='Off'
2016-10-19T12:28:14: Client 0: queuing <defSwitchVector device='EQMod Mount' name='DEBUG_LEVEL'>
2016-10-19T12:28:14: Driver indi_eqmod_telescope: read defSwitchVector EQMod Mount LOGGING_LEVEL Idle rw
  LOG_ERROR='On'
 LOG_WARNING='On'
 LOG_SESSION='On'
  LOG_DEBUG='Off'
 LOG_EXTRA_1='Off'
 LOG_EXTRA_2='Off'
 LOG_EXTRA_3='Off'
 LOG_EXTRA_4='Off'
2016-10-19T12:28:14: Client 0: queuing <defSwitchVector device='EQMod Mount' name='LOGGING_LEVEL'>
2016-10-19T12:28:14: Driver indi_eqmod_telescope: read defSwitchVector EQMod Mount LOG_OUTPUT Idle rw
 CLIENT_DEBUG='On'
 FILE_DEBUG='Off'
2016-10-19T12:28:14: Client 0: queuing <defSwitchVector device='EQMod Mount' name='LOG_OUTPUT'>
2016-10-19T12:28:14: Driver indi_eqmod_telescope: read setSwitchVector EQMod Mount DEBUG Ok
     ENABLE='On'
    DISABLE='Off'
2016-10-19T12:28:14: Client 0: queuing <setSwitchVector device='EQMod Mount' name='DEBUG'>
2016-10-19T12:28:14: Client 0: sending msg copy 1 nq 5:
<message device="EQMod Mount" timestamp="2016-10-19T12:28:14" message="Debug is enabled."/>

2016-10-19T12:28:14: Client 0: sending msg copy 1 nq 4:
<defSwitchVector device="EQMod Mount" name="DEBUG_LEVEL" label="Debug Levels" group="Options" state="Idle" perm="rw" rule="AnyOfMany" timeout="0" timestamp="2016-10-19T12:28:14">
    <defSwitch name="DBG_ERROR" label="Errors">
On
    </defSwitch>
    <defSwitch name="DBG_WARNING" label="Warnings">
On
    </defSwitch>
    <defSwitch name="DBG_SESSION" label="Messages">
On
    </defSwitch>
    <defSwitch name="DBG_DEBUG" label="Driver Debug">
Off
    </defSwitch>
    <defSwitch name="DBG_EXTRA_1" label="Alignment Subsystem">
Off
    </defSwitch>
    <defSwitch name="DBG_EXTRA_2" label="Scope Status">
Off
    </defSwitch>
    <defSwitch name="DBG_EXTRA_3" label="Serial Port">
Off
    </defSwitch>
    <defSwitch name="DBG_EXTRA_4" label="Verbose Mount">
Off
    </defSwitch>
</defSwitchVector>

2016-10-19T12:28:14: Client 0: sending msg copy 1 nq 3:
<defSwitchVector device="EQMod Mount" name="LOGGING_LEVEL" label="Logging Levels" group="Options" state="Idle" perm="rw" rule="AnyOfMany" timeout="0" timestamp="2016-10-19T12:28:14">
    <defSwitch name="LOG_ERROR" label="Errors">
On
    </defSwitch>
    <defSwitch name="LOG_WARNING" label="Warnings">
On
    </defSwitch>
    <defSwitch name="LOG_SESSION" label="Messages">
On
    </defSwitch>
    <defSwitch name="LOG_DEBUG" label="Driver Debug">
Off
    </defSwitch>
    <defSwitch name="LOG_EXTRA_1" label="Alignment Subsystem">
Off
    </defSwitch>
    <defSwitch name="LOG_EXTRA_2" label="Scope Status">
Off
    </defSwitch>
    <defSwitch name="LOG_EXTRA_3" label="Serial Port">
Off
    </defSwitch>
    <defSwitch name="LOG_EXTRA_4" label="Verbose Mount">
Off
    </defSwitch>
</defSwitchVector>

2016-10-19T12:28:14: Client 0: sending msg copy 1 nq 2:
<defSwitchVector device="EQMod Mount" name="LOG_OUTPUT" label="Log Output" group="Options" state="Idle" perm="rw" rule="AnyOfMany" timeout="0" timestamp="2016-10-19T12:28:14">
    <defSwitch name="CLIENT_DEBUG" label="To Client">
On
    </defSwitch>
    <defSwitch name="FILE_DEBUG" label="To Log File">
Off
    </defSwitch>
</defSwitchVector>

2016-10-19T12:28:14: Client 0: sending msg copy 1 nq 1:
<setSwitchVector device="EQMod Mount" name="DEBUG" state="Ok" timeout="0" timestamp="2016-10-19T12:28:14">
    <oneSwitch name="ENABLE">
On
    </oneSwitch>
    <oneSwitch name="DISABLE">
Off
    </oneSwitch>
</setSwitchVector>

2016-10-19T12:28:20: Client 0: read newSwitchVector EQMod Mount DEBUG_LEVEL 
  DBG_ERROR='On'
 DBG_WARNING='On'
 DBG_SESSION='On'
  DBG_DEBUG='Off'
 DBG_EXTRA_1='Off'
 DBG_EXTRA_2='Off'
 DBG_EXTRA_3='On'
 DBG_EXTRA_4='Off'
2016-10-19T12:28:20: Driver indi_eqmod_telescope: queuing responsible for <newSwitchVector device='EQMod Mount' name='DEBUG_LEVEL'>
2016-10-19T12:28:20: Driver indi_eqmod_telescope: sending msg copy 1 nq 1:
<newSwitchVector device="EQMod Mount" name="DEBUG_LEVEL">
    <oneSwitch name="DBG_ERROR">
On
    </oneSwitch>
    <oneSwitch name="DBG_WARNING">
On
    </oneSwitch>
    <oneSwitch name="DBG_SESSION">
On
    </oneSwitch>
    <oneSwitch name="DBG_DEBUG">
Off
    </oneSwitch>
    <oneSwitch name="DBG_EXTRA_1">
Off
    </oneSwitch>
    <oneSwitch name="DBG_EXTRA_2">
Off
    </oneSwitch>
    <oneSwitch name="DBG_EXTRA_3">
On
    </oneSwitch>
    <oneSwitch name="DBG_EXTRA_4">
Off
    </oneSwitch>
</newSwitchVector>

2016-10-19T12:28:20: Driver indi_eqmod_telescope: read setSwitchVector EQMod Mount DEBUG_LEVEL Ok
  DBG_ERROR='On'
 DBG_WARNING='On'
 DBG_SESSION='On'
  DBG_DEBUG='Off'
 DBG_EXTRA_1='Off'
 DBG_EXTRA_2='Off'
 DBG_EXTRA_3='On'
 DBG_EXTRA_4='Off'
2016-10-19T12:28:20: Client 0: queuing <setSwitchVector device='EQMod Mount' name='DEBUG_LEVEL'>
2016-10-19T12:28:20: Driver indi_eqmod_telescope: read setSwitchVector EQMod Mount DEBUG_LEVEL Ok
  DBG_ERROR='On'
 DBG_WARNING='On'
 DBG_SESSION='On'
  DBG_DEBUG='Off'
 DBG_EXTRA_1='Off'
 DBG_EXTRA_2='Off'
 DBG_EXTRA_3='On'
 DBG_EXTRA_4='Off'
2016-10-19T12:28:20: Client 0: queuing <setSwitchVector device='EQMod Mount' name='DEBUG_LEVEL'>
2016-10-19T12:28:20: Client 0: sending msg copy 1 nq 2:
<setSwitchVector device="EQMod Mount" name="DEBUG_LEVEL" state="Ok" timeout="0" timestamp="2016-10-19T12:28:20">
    <oneSwitch name="DBG_ERROR">
On
    </oneSwitch>
    <oneSwitch name="DBG_WARNING">
On
    </oneSwitch>
    <oneSwitch name="DBG_SESSION">
On
    </oneSwitch>
    <oneSwitch name="DBG_DEBUG">
Off
    </oneSwitch>
    <oneSwitch name="DBG_EXTRA_1">
Off
    </oneSwitch>
    <oneSwitch name="DBG_EXTRA_2">
Off
    </oneSwitch>
    <oneSwitch name="DBG_EXTRA_3">
On
    </oneSwitch>
    <oneSwitch name="DBG_EXTRA_4">
Off
    </oneSwitch>
</setSwitchVector>

2016-10-19T12:28:20: Client 0: sending msg copy 1 nq 1:
<setSwitchVector device="EQMod Mount" name="DEBUG_LEVEL" state="Ok" timeout="0" timestamp="2016-10-19T12:28:20">
    <oneSwitch name="DBG_ERROR">
On
    </oneSwitch>
    <oneSwitch name="DBG_WARNING">
On
    </oneSwitch>
    <oneSwitch name="DBG_SESSION">
On
    </oneSwitch>
    <oneSwitch name="DBG_DEBUG">
Off
    </oneSwitch>
    <oneSwitch name="DBG_EXTRA_1">
Off
    </oneSwitch>
    <oneSwitch name="DBG_EXTRA_2">
Off
    </oneSwitch>
    <oneSwitch name="DBG_EXTRA_3">
On
    </oneSwitch>
    <oneSwitch name="DBG_EXTRA_4">
Off
    </oneSwitch>
</setSwitchVector>

2016-10-19T12:28:20: Client 0: read newSwitchVector EQMod Mount LOGGING_LEVEL 
  LOG_ERROR='On'
 LOG_WARNING='On'
 LOG_SESSION='On'
  LOG_DEBUG='Off'
 LOG_EXTRA_1='Off'
 LOG_EXTRA_2='Off'
 LOG_EXTRA_3='On'
 LOG_EXTRA_4='Off'
2016-10-19T12:28:20: Driver indi_eqmod_telescope: queuing responsible for <newSwitchVector device='EQMod Mount' name='LOGGING_LEVEL'>
2016-10-19T12:28:20: Driver indi_eqmod_telescope: sending msg copy 1 nq 1:
<newSwitchVector device="EQMod Mount" name="LOGGING_LEVEL">
    <oneSwitch name="LOG_ERROR">
On
    </oneSwitch>
    <oneSwitch name="LOG_WARNING">
On
    </oneSwitch>
    <oneSwitch name="LOG_SESSION">
On
    </oneSwitch>
    <oneSwitch name="LOG_DEBUG">
Off
    </oneSwitch>
    <oneSwitch name="LOG_EXTRA_1">
Off
    </oneSwitch>
    <oneSwitch name="LOG_EXTRA_2">
Off
    </oneSwitch>
    <oneSwitch name="LOG_EXTRA_3">
On
    </oneSwitch>
    <oneSwitch name="LOG_EXTRA_4">
Off
    </oneSwitch>
</newSwitchVector>

2016-10-19T12:28:20: Driver indi_eqmod_telescope: read setSwitchVector EQMod Mount LOGGING_LEVEL Ok
  LOG_ERROR='On'
 LOG_WARNING='On'
 LOG_SESSION='On'
  LOG_DEBUG='Off'
 LOG_EXTRA_1='Off'
 LOG_EXTRA_2='Off'
 LOG_EXTRA_3='On'
 LOG_EXTRA_4='Off'
2016-10-19T12:28:20: Client 0: queuing <setSwitchVector device='EQMod Mount' name='LOGGING_LEVEL'>
2016-10-19T12:28:20: Driver indi_eqmod_telescope: read setSwitchVector EQMod Mount LOGGING_LEVEL Ok
  LOG_ERROR='On'
 LOG_WARNING='On'
 LOG_SESSION='On'
  LOG_DEBUG='Off'
 LOG_EXTRA_1='Off'
 LOG_EXTRA_2='Off'
 LOG_EXTRA_3='On'
 LOG_EXTRA_4='Off'
2016-10-19T12:28:20: Client 0: queuing <setSwitchVector device='EQMod Mount' name='LOGGING_LEVEL'>
2016-10-19T12:28:20: Client 0: sending msg copy 1 nq 2:
<setSwitchVector device="EQMod Mount" name="LOGGING_LEVEL" state="Ok" timeout="0" timestamp="2016-10-19T12:28:20">
    <oneSwitch name="LOG_ERROR">
On
    </oneSwitch>
    <oneSwitch name="LOG_WARNING">
On
    </oneSwitch>
    <oneSwitch name="LOG_SESSION">
On
    </oneSwitch>
    <oneSwitch name="LOG_DEBUG">
Off
    </oneSwitch>
    <oneSwitch name="LOG_EXTRA_1">
Off
    </oneSwitch>
    <oneSwitch name="LOG_EXTRA_2">
Off
    </oneSwitch>
    <oneSwitch name="LOG_EXTRA_3">
On
    </oneSwitch>
    <oneSwitch name="LOG_EXTRA_4">
Off
    </oneSwitch>
</setSwitchVector>

2016-10-19T12:28:20: Client 0: sending msg copy 1 nq 1:
<setSwitchVector device="EQMod Mount" name="LOGGING_LEVEL" state="Ok" timeout="0" timestamp="2016-10-19T12:28:20">
    <oneSwitch name="LOG_ERROR">
On
    </oneSwitch>
    <oneSwitch name="LOG_WARNING">
On
    </oneSwitch>
    <oneSwitch name="LOG_SESSION">
On
    </oneSwitch>
    <oneSwitch name="LOG_DEBUG">
Off
    </oneSwitch>
    <oneSwitch name="LOG_EXTRA_1">
Off
    </oneSwitch>
    <oneSwitch name="LOG_EXTRA_2">
Off
    </oneSwitch>
    <oneSwitch name="LOG_EXTRA_3">
On
    </oneSwitch>
    <oneSwitch name="LOG_EXTRA_4">
Off
    </oneSwitch>
</setSwitchVector>

2016-10-19T12:28:36: Client 0: read newSwitchVector CCD Simulator CONNECTION 
    CONNECT='On'
2016-10-19T12:28:36: Driver indi_simulator_ccd: queuing responsible for <newSwitchVector device='CCD Simulator' name='CONNECTION'>
2016-10-19T12:28:36: Client 0: read newSwitchVector EQMod Mount CONNECTION 
    CONNECT='On'
2016-10-19T12:28:36: Driver indi_eqmod_telescope: queuing responsible for <newSwitchVector device='EQMod Mount' name='CONNECTION'>
2016-10-19T12:28:36: Driver indi_simulator_ccd: sending msg copy 1 nq 1:
<newSwitchVector device="CCD Simulator" name="CONNECTION">
    <oneSwitch name="CONNECT">
On
    </oneSwitch>
</newSwitchVector>

2016-10-19T12:28:36: Driver indi_eqmod_telescope: sending msg copy 1 nq 1:
<newSwitchVector device="EQMod Mount" name="CONNECTION">
    <oneSwitch name="CONNECT">
On
    </oneSwitch>
</newSwitchVector>

2016-10-19T12:28:36: Driver indi_simulator_ccd: read setSwitchVector CCD Simulator CONNECTION Ok
    CONNECT='On'
 DISCONNECT='Off'
2016-10-19T12:28:36: Client 0: queuing <setSwitchVector device='CCD Simulator' name='CONNECTION'>
2016-10-19T12:28:36: Driver indi_simulator_ccd: read defNumberVector CCD Simulator CCD_EXPOSURE Idle rw
 CCD_EXPOSURE_VALUE='1'
2016-10-19T12:28:36: Client 0: queuing <defNumberVector device='CCD Simulator' name='CCD_EXPOSURE'>
2016-10-19T12:28:36: Driver indi_simulator_ccd: read defSwitchVector CCD Simulator CCD_ABORT_EXPOSURE Idle rw
      ABORT='Off'
2016-10-19T12:28:36: Client 0: queuing <defSwitchVector device='CCD Simulator' name='CCD_ABORT_EXPOSURE'>
2016-10-19T12:28:36: Driver indi_simulator_ccd: read defNumberVector CCD Simulator CCD_FRAME Idle rw
          X='0'
          Y='0'
      WIDTH='0'
     HEIGHT='0'
2016-10-19T12:28:36: Client 0: queuing <defNumberVector device='CCD Simulator' name='CCD_FRAME'>
2016-10-19T12:28:36: Driver indi_simulator_ccd: read defNumberVector CCD Simulator CCD_BINNING Idle rw
    HOR_BIN='1'
    VER_BIN='1'
2016-10-19T12:28:36: Client 0: queuing <defNumberVector device='CCD Simulator' name='CCD_BINNING'>
2016-10-19T12:28:36: Driver indi_simulator_ccd: read defNumberVector CCD Simulator GUIDER_EXPOSURE Idle rw
 GUIDER_EXPOSURE_VALUE='1'
2016-10-19T12:28:36: Client 0: queuing <defNumberVector device='CCD Simulator' name='GUIDER_EXPOSURE'>
2016-10-19T12:28:36: Driver indi_simulator_ccd: read defSwitchVector CCD Simulator GUIDER_ABORT_EXPOSURE Idle rw
      ABORT='Off'
2016-10-19T12:28:36: Client 0: queuing <defSwitchVector device='CCD Simulator' name='GUIDER_ABORT_EXPOSURE'>
2016-10-19T12:28:36: Driver indi_simulator_ccd: read defNumberVector CCD Simulator GUIDER_FRAME Idle rw
          X='0'
          Y='0'
      WIDTH='0'
     HEIGHT='0'
2016-10-19T12:28:36: Client 0: queuing <defNumberVector device='CCD Simulator' name='GUIDER_FRAME'>
2016-10-19T12:28:36: Driver indi_simulator_ccd: read defNumberVector CCD Simulator CCD_TEMPERATURE Idle rw
 CCD_TEMPERATURE_VALUE='0'
2016-10-19T12:28:36: Client 0: queuing <defNumberVector device='CCD Simulator' name='CCD_TEMPERATURE'>
2016-10-19T12:28:36: Driver indi_simulator_ccd: read defNumberVector CCD Simulator CCD_INFO Idle ro
  CCD_MAX_X='0'
  CCD_MAX_Y='0'
 CCD_PIXEL_SIZE='0'
 CCD_PIXEL_SIZE_X='0'
 CCD_PIXEL_SIZE_Y='0'
 CCD_BITSPERPIXEL='0'
2016-10-19T12:28:36: Client 0: queuing <defNumberVector device='CCD Simulator' name='CCD_INFO'>
2016-10-19T12:28:36: Driver indi_simulator_ccd: read defNumberVector CCD Simulator GUIDER_INFO Idle ro
  CCD_MAX_X='0'
  CCD_MAX_Y='0'
 CCD_PIXEL_SIZE='0'
 CCD_PIXEL_SIZE_X='0'
 CCD_PIXEL_SIZE_Y='0'
 CCD_BITSPERPIXEL='0'
2016-10-19T12:28:36: Client 0: queuing <defNumberVector device='CCD Simulator' name='GUIDER_INFO'>
2016-10-19T12:28:36: Driver indi_simulator_ccd: read defNumberVector CCD Simulator GUIDER_BINNING Idle rw
    HOR_BIN='1'
    VER_BIN='1'
2016-10-19T12:28:36: Client 0: queuing <defNumberVector device='CCD Simulator' name='GUIDER_BINNING'>
2016-10-19T12:28:36: Driver indi_simulator_ccd: read defSwitchVector CCD Simulator CCD_COMPRESSION Idle rw
 CCD_COMPRESS='Off'
    CCD_RAW='On'
2016-10-19T12:28:36: Client 0: queuing <defSwitchVector device='CCD Simulator' name='CCD_COMPRESSION'>
2016-10-19T12:28:36: Driver indi_simulator_ccd: read defBLOBVector CCD Simulator CCD1 Idle ro
2016-10-19T12:28:36: Client 0: queuing <defBLOBVector device='CCD Simulator' name='CCD1'>
2016-10-19T12:28:36: Driver indi_eqmod_telescope: read message EQMod Mount   'Connecting to port /dev/mount at speed 9600'
2016-10-19T12:28:36: Client 0: queuing <message device='EQMod Mount' name=''>
2016-10-19T12:28:36: Driver indi_eqmod_telescope: read message EQMod Mount   'dispatch_command: ":e1", 4 bytes written'
2016-10-19T12:28:36: Client 0: queuing <message device='EQMod Mount' name=''>
2016-10-19T12:28:36: Driver indi_eqmod_telescope: read message EQMod Mount   'read_eqmod: "=020400", 8 bytes read'
2016-10-19T12:28:36: Client 0: queuing <message device='EQMod Mount' name=''>
2016-10-19T12:28:36: Driver indi_eqmod_telescope: read message EQMod Mount   'Successfully connected to EQMod Mount.'
2016-10-19T12:28:36: Client 0: queuing <message device='EQMod Mount' name=''>
2016-10-19T12:28:36: Driver indi_eqmod_telescope: read setSwitchVector EQMod Mount CONNECTION Ok
    CONNECT='On'
 DISCONNECT='Off'
2016-10-19T12:28:36: Client 0: queuing <setSwitchVector device='EQMod Mount' name='CONNECTION'>
2016-10-19T12:28:36: Driver indi_eqmod_telescope: read defSwitchVector EQMod Mount ON_COORD_SET Idle rw
      TRACK='On'
       SLEW='Off'
       SYNC='Off'
2016-10-19T12:28:36: Client 0: queuing <defSwitchVector device='EQMod Mount' name='ON_COORD_SET'>
2016-10-19T12:28:36: Driver indi_eqmod_telescope: read defNumberVector EQMod Mount EQUATORIAL_EOD_COORD Idle rw
         RA='0'
        DEC='0'
2016-10-19T12:28:36: Client 0: queuing <defNumberVector device='EQMod Mount' name='EQUATORIAL_EOD_COORD'>
2016-10-19T12:28:36: Driver indi_eqmod_telescope: read defSwitchVector EQMod Mount TELESCOPE_ABORT_MOTION Idle rw
      ABORT='Off'
2016-10-19T12:28:36: Client 0: queuing <defSwitchVector device='EQMod Mount' name='TELESCOPE_ABORT_MOTION'>
2016-10-19T12:28:36: Driver indi_eqmod_telescope: read defSwitchVector EQMod Mount TELESCOPE_MOTION_NS Idle rw
 MOTION_NORTH='Off'
 MOTION_SOUTH='Off'
2016-10-19T12:28:36: Client 0: queuing <defSwitchVector device='EQMod Mount' name='TELESCOPE_MOTION_NS'>
2016-10-19T12:28:36: Driver indi_eqmod_telescope: read defSwitchVector EQMod Mount TELESCOPE_MOTION_WE Idle rw
 MOTION_WEST='Off'
 MOTION_EAST='Off'
2016-10-19T12:28:36: Client 0: queuing <defSwitchVector device='EQMod Mount' name='TELESCOPE_MOTION_WE'>
2016-10-19T12:28:36: Driver indi_eqmod_telescope: read defSwitchVector EQMod Mount TELESCOPE_SLEW_RATE Idle rw
 SLEW_GUIDE='Off'
         2x='Off'
 SLEW_CENTERING='Off'
         4x='Off'
  SLEW_FIND='Off'
         6x='On'
         7x='Off'
         8x='Off'
         9x='Off'
   SLEW_MAX='Off'
 SLEWCUSTOM='Off'
2016-10-19T12:28:36: Client 0: queuing <defSwitchVector device='EQMod Mount' name='TELESCOPE_SLEW_RATE'>
2016-10-19T12:28:36: Driver indi_eqmod_telescope: read defTextVector EQMod Mount TIME_UTC Idle rw
        UTC=''
     OFFSET=''
2016-10-19T12:28:36: Client 0: queuing <defTextVector device='EQMod Mount' name='TIME_UTC'>
2016-10-19T12:28:36: Driver indi_eqmod_telescope: read defNumberVector EQMod Mount GEOGRAPHIC_COORD Ok rw
        LAT='0'
       LONG='0'
       ELEV='0'
2016-10-19T12:28:36: Client 0: queuing <defNumberVector device='EQMod Mount' name='GEOGRAPHIC_COORD'>
2016-10-19T12:28:36: Driver indi_eqmod_telescope: read defSwitchVector EQMod Mount TELESCOPE_PARK Idle rw
       PARK='Off'
     UNPARK='Off'
2016-10-19T12:28:36: Client 0: queuing <defSwitchVector device='EQMod Mount' name='TELESCOPE_PARK'>
2016-10-19T12:28:36: Driver indi_eqmod_telescope: read defNumberVector EQMod Mount TELESCOPE_PARK_POSITION Idle rw
    PARK_RA='0'
   PARK_DEC='0'
2016-10-19T12:28:36: Client 0: queuing <defNumberVector device='EQMod Mount' name='TELESCOPE_PARK_POSITION'>
2016-10-19T12:28:36: Driver indi_eqmod_telescope: read defSwitchVector EQMod Mount TELESCOPE_PARK_OPTION Idle rw
 PARK_CURRENT='Off'
 PARK_DEFAULT='Off'
 PARK_WRITE_DATA='Off'
2016-10-19T12:28:36: Client 0: queuing <defSwitchVector device='EQMod Mount' name='TELESCOPE_PARK_OPTION'>
2016-10-19T12:28:36: Driver indi_eqmod_telescope: read defNumberVector EQMod Mount TELESCOPE_INFO Ok rw
 TELESCOPE_APERTURE='0'
 TELESCOPE_FOCAL_LENGTH='0'
 GUIDER_APERTURE='0'
 GUIDER_FOCAL_LENGTH='0'
2016-10-19T12:28:36: Client 0: queuing <defNumberVector device='EQMod Mount' name='TELESCOPE_INFO'>
2016-10-19T12:28:36: Driver indi_eqmod_telescope: read defNumberVector EQMod Mount TARGET_EOD_COORD Idle ro
         RA='0'
        DEC='0'
2016-10-19T12:28:36: Client 0: queuing <defNumberVector device='EQMod Mount' name='TARGET_EOD_COORD'>
2016-10-19T12:28:36: Driver indi_eqmod_telescope: read defSwitchVector EQMod Mount USEJOYSTICK Idle rw
     ENABLE='Off'
    DISABLE='On'
2016-10-19T12:28:36: Client 0: queuing <defSwitchVector device='EQMod Mount' name='USEJOYSTICK'>
2016-10-19T12:28:36: Driver indi_eqmod_telescope: read defNumberVector EQMod Mount TELESCOPE_TIMED_GUIDE_NS Idle rw
 TIMED_GUIDE_N='0'
 TIMED_GUIDE_S='0'
2016-10-19T12:28:36: Client 0: queuing <defNumberVector device='EQMod Mount' name='TELESCOPE_TIMED_GUIDE_NS'>
2016-10-19T12:28:36: Driver indi_eqmod_telescope: read defNumberVector EQMod Mount TELESCOPE_TIMED_GUIDE_WE Idle rw
 TIMED_GUIDE_W='0'
 TIMED_GUIDE_E='0'
2016-10-19T12:28:36: Client 0: queuing <defNumberVector device='EQMod Mount' name='TELESCOPE_TIMED_GUIDE_WE'>
2016-10-19T12:28:36: Driver indi_eqmod_telescope: read defNumberVector EQMod Mount SLEWSPEEDS Idle rw
     RASLEW='64'
     DESLEW='64'
2016-10-19T12:28:36: Client 0: queuing <defNumberVector device='EQMod Mount' name='SLEWSPEEDS'>
2016-10-19T12:28:36: Driver indi_eqmod_telescope: read defNumberVector EQMod Mount GUIDE_RATE Idle rw
 GUIDE_RATE_WE='0.2999999999999999889'
 GUIDE_RATE_NS='0.2999999999999999889'
2016-10-19T12:28:36: Client 0: queuing <defNumberVector device='EQMod Mount' name='GUIDE_RATE'>
2016-10-19T12:28:36: Driver indi_eqmod_telescope: read defTextVector EQMod Mount MOUNTINFORMATION Idle ro
 MOUNT_TYPE=''
 MOTOR_CONTROLLER=''
2016-10-19T12:28:36: Client 0: queuing <defTextVector device='EQMod Mount' name='MOUNTINFORMATION'>
2016-10-19T12:28:36: Driver indi_eqmod_telescope: read defNumberVector EQMod Mount STEPPERS Idle ro
 RASteps360='1'
 DESteps360='1'
 RAStepsWorm='1'
 DEStepsWorm='1'
 RAHighspeedRatio='1'
 DEHighspeedRatio='1'
2016-10-19T12:28:36: Client 0: queuing <defNumberVector device='EQMod Mount' name='STEPPERS'>
2016-10-19T12:28:36: Driver indi_eqmod_telescope: read defNumberVector EQMod Mount CURRENTSTEPPERS Idle ro
 RAStepsCurrent='1'
 DEStepsCurrent='1'
2016-10-19T12:28:36: Client 0: queuing <defNumberVector device='EQMod Mount' name='CURRENTSTEPPERS'>
2016-10-19T12:28:36: Driver indi_eqmod_telescope: read defNumberVector EQMod Mount PERIODS Idle ro
   RAPERIOD='256'
   DEPERIOD='256'
2016-10-19T12:28:36: Client 0: queuing <defNumberVector device='EQMod Mount' name='PERIODS'>
2016-10-19T12:28:36: Driver indi_eqmod_telescope: read defNumberVector EQMod Mount JULIAN Idle ro
 JULIANDATE='0'
2016-10-19T12:28:36: Client 0: queuing <defNumberVector device='EQMod Mount' name='JULIAN'>
2016-10-19T12:28:36: Driver indi_eqmod_telescope: read defNumberVector EQMod Mount TIME_LST Idle ro
        LST='12'
2016-10-19T12:28:36: Client 0: queuing <defNumberVector device='EQMod Mount' name='TIME_LST'>
2016-10-19T12:28:36: Driver indi_eqmod_telescope: read defLightVector EQMod Mount RASTATUS Idle
 RAInitialized='Alert'
  RARunning='Idle'
     RAGoto='Idle'
  RAForward='Idle'
 RAHighspeed='Idle'
2016-10-19T12:28:36: Client 0: queuing <defLightVector device='EQMod Mount' name='RASTATUS'>
2016-10-19T12:28:36: Driver indi_eqmod_telescope: read defLightVector EQMod Mount DESTATUS Idle
 DEInitialized='Alert'
  DERunning='Idle'
     DEGoto='Idle'
  DEForward='Idle'
 DEHighspeed='Idle'
2016-10-19T12:28:36: Client 0: queuing <defLightVector device='EQMod Mount' name='DESTATUS'>
2016-10-19T12:28:36: Driver indi_eqmod_telescope: read defSwitchVector EQMod Mount HEMISPHERE Idle ro
      NORTH='On'
      SOUTH='Off'
2016-10-19T12:28:36: Client 0: queuing <defSwitchVector device='EQMod Mount' name='HEMISPHERE'>
2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 46:
<setSwitchVector device="CCD Simulator" name="CONNECTION" state="Ok" timeout="60" timestamp="2016-10-19T12:28:36">
    <oneSwitch name="CONNECT">
On
    </oneSwitch>
    <oneSwitch name="DISCONNECT">
Off
    </oneSwitch>
</setSwitchVector>

2016-10-19T12:28:36: Driver indi_simulator_ccd: read defSwitchVector CCD Simulator GUIDER_COMPRESSION Idle rw
 GUIDER_COMPRESS='Off'
 GUIDER_RAW='On'
2016-10-19T12:28:36: Client 0: queuing <defSwitchVector device='CCD Simulator' name='GUIDER_COMPRESSION'>
2016-10-19T12:28:36: Driver indi_simulator_ccd: read defBLOBVector CCD Simulator CCD2 Idle ro
2016-10-19T12:28:36: Client 0: queuing <defBLOBVector device='CCD Simulator' name='CCD2'>
2016-10-19T12:28:36: Driver indi_simulator_ccd: read defNumberVector CCD Simulator TELESCOPE_TIMED_GUIDE_NS Idle rw
 TIMED_GUIDE_N='0'
 TIMED_GUIDE_S='0'
2016-10-19T12:28:36: Client 0: queuing <defNumberVector device='CCD Simulator' name='TELESCOPE_TIMED_GUIDE_NS'>
2016-10-19T12:28:36: Driver indi_simulator_ccd: read defNumberVector CCD Simulator TELESCOPE_TIMED_GUIDE_WE Idle rw
 TIMED_GUIDE_W='0'
 TIMED_GUIDE_E='0'
2016-10-19T12:28:36: Client 0: queuing <defNumberVector device='CCD Simulator' name='TELESCOPE_TIMED_GUIDE_WE'>
2016-10-19T12:28:36: Driver indi_simulator_ccd: read defSwitchVector CCD Simulator CCD_FRAME_TYPE Idle rw
 FRAME_LIGHT='On'
 FRAME_BIAS='Off'
 FRAME_DARK='Off'
 FRAME_FLAT='Off'
2016-10-19T12:28:36: Client 0: queuing <defSwitchVector device='CCD Simulator' name='CCD_FRAME_TYPE'>
2016-10-19T12:28:36: Driver indi_simulator_ccd: read defSwitchVector CCD Simulator CCD_FRAME_RESET Idle wo
      RESET='Off'
2016-10-19T12:28:36: Client 0: queuing <defSwitchVector device='CCD Simulator' name='CCD_FRAME_RESET'>
2016-10-19T12:28:36: Driver indi_simulator_ccd: read defSwitchVector CCD Simulator GUIDER_FRAME_TYPE Idle rw
 FRAME_LIGHT='On'
 FRAME_BIAS='Off'
 FRAME_DARK='Off'
 FRAME_FLAT='Off'
2016-10-19T12:28:36: Client 0: queuing <defSwitchVector device='CCD Simulator' name='GUIDER_FRAME_TYPE'>
2016-10-19T12:28:36: Driver indi_simulator_ccd: read defSwitchVector CCD Simulator CCD_RAPID_GUIDE Idle rw
     ENABLE='Off'
    DISABLE='On'
2016-10-19T12:28:36: Client 0: queuing <defSwitchVector device='CCD Simulator' name='CCD_RAPID_GUIDE'>
2016-10-19T12:28:36: Driver indi_simulator_ccd: read defSwitchVector CCD Simulator GUIDER_RAPID_GUIDE Idle rw
     ENABLE='Off'
    DISABLE='On'
2016-10-19T12:28:36: Client 0: queuing <defSwitchVector device='CCD Simulator' name='GUIDER_RAPID_GUIDE'>
2016-10-19T12:28:36: Driver indi_simulator_ccd: read defSwitchVector CCD Simulator ASTROMETRY_SOLVER Idle rw
 ASTROMETRY_SOLVER_ENABLE='Off'
 ASTROMETRY_SOLVER_DISABLE='On'
2016-10-19T12:28:36: Client 0: queuing <defSwitchVector device='CCD Simulator' name='ASTROMETRY_SOLVER'>
2016-10-19T12:28:36: Driver indi_simulator_ccd: read defTextVector CCD Simulator ASTROMETRY_SETTINGS Idle wo
 ASTROMETRY_SETTINGS_BINARY='/usr/bin/solve-field'
 ASTROMETRY_SETTINGS_OPTIONS='--no-verify --no-plots --no-fits2fits --resort --downsample 2 -O'
2016-10-19T12:28:36: Client 0: queuing <defTextVector device='CCD Simulator' name='ASTROMETRY_SETTINGS'>
2016-10-19T12:28:36: Driver indi_simulator_ccd: read defSwitchVector CCD Simulator WCS_CONTROL Idle rw
 WCS_ENABLE='Off'
 WCS_DISABLE='On'
2016-10-19T12:28:36: Client 0: queuing <defSwitchVector device='CCD Simulator' name='WCS_CONTROL'>
2016-10-19T12:28:36: Driver indi_simulator_ccd: read defSwitchVector CCD Simulator UPLOAD_MODE Idle rw
 UPLOAD_CLIENT='On'
 UPLOAD_LOCAL='Off'
 UPLOAD_BOTH='Off'
2016-10-19T12:28:36: Client 0: queuing <defSwitchVector device='CCD Simulator' name='UPLOAD_MODE'>
2016-10-19T12:28:36: Driver indi_simulator_ccd: read defTextVector CCD Simulator UPLOAD_SETTINGS Idle rw
 UPLOAD_DIR='/home/pi'
 UPLOAD_PREFIX='IMAGE_XXX'
2016-10-19T12:28:36: Client 0: queuing <defTextVector device='CCD Simulator' name='UPLOAD_SETTINGS'>
2016-10-19T12:28:36: Driver indi_simulator_ccd: read defSwitchVector CCD Simulator CCD_COOLER Idle wo
  COOLER_ON='Off'
 COOLER_OFF='On'
2016-10-19T12:28:36: Client 0: queuing <defSwitchVector device='CCD Simulator' name='CCD_COOLER'>
2016-10-19T12:28:36: Driver indi_simulator_ccd: read setNumberVector CCD Simulator CCD_INFO Idle
  CCD_MAX_X='1280'
  CCD_MAX_Y='1024'
 CCD_PIXEL_SIZE='0'
 CCD_PIXEL_SIZE_X='0'
 CCD_PIXEL_SIZE_Y='0'
 CCD_BITSPERPIXEL='0'
2016-10-19T12:28:36: Client 0: queuing <setNumberVector device='CCD Simulator' name='CCD_INFO'>
2016-10-19T12:28:36: Driver indi_simulator_ccd: read setNumberVector CCD Simulator CCD_FRAME Idle
          X='0'
          Y='0'
      WIDTH='0'
     HEIGHT='0'
2016-10-19T12:28:36: Client 0: queuing <setNumberVector device='CCD Simulator' name='CCD_FRAME'>
2016-10-19T12:28:36: Driver indi_simulator_ccd: read setNumberVector CCD Simulator CCD_FRAME Idle
          X='0'
          Y='0'
      WIDTH='1280'
     HEIGHT='1024'
2016-10-19T12:28:36: Client 0: queuing <setNumberVector device='CCD Simulator' name='CCD_FRAME'>
2016-10-19T12:28:36: Driver indi_simulator_ccd: read setNumberVector CCD Simulator CCD_BINNING Idle
    HOR_BIN='1'
    VER_BIN='1'
2016-10-19T12:28:36: Client 0: queuing <setNumberVector device='CCD Simulator' name='CCD_BINNING'>
2016-10-19T12:28:36: Driver indi_simulator_ccd: read setNumberVector CCD Simulator CCD_INFO Idle
  CCD_MAX_X='1280'
  CCD_MAX_Y='1024'
 CCD_PIXEL_SIZE='5.1999998092651367188'
 CCD_PIXEL_SIZE_X='5.1999998092651367188'
 CCD_PIXEL_SIZE_Y='5.1999998092651367188'
 CCD_BITSPERPIXEL='0'
2016-10-19T12:28:36: Client 0: queuing <setNumberVector device='CCD Simulator' name='CCD_INFO'>
2016-10-19T12:28:36: Driver indi_simulator_ccd: read setNumberVector CCD Simulator CCD_INFO Idle
  CCD_MAX_X='1280'
  CCD_MAX_Y='1024'
 CCD_PIXEL_SIZE='5.1999998092651367188'
 CCD_PIXEL_SIZE_X='5.1999998092651367188'
 CCD_PIXEL_SIZE_Y='5.1999998092651367188'
 CCD_BITSPERPIXEL='16'
2016-10-19T12:28:36: Client 0: queuing <setNumberVector device='CCD Simulator' name='CCD_INFO'>
2016-10-19T12:28:36: Driver indi_simulator_ccd: read setNumberVector CCD Simulator CCD_TEMPERATURE Idle
 CCD_TEMPERATURE_VALUE='20'
2016-10-19T12:28:36: Client 0: queuing <setNumberVector device='CCD Simulator' name='CCD_TEMPERATURE'>
2016-10-19T12:28:36: Driver indi_simulator_ccd: read setNumberVector CCD Simulator GUIDER_INFO Idle
  CCD_MAX_X='500'
  CCD_MAX_Y='290'
 CCD_PIXEL_SIZE='0'
 CCD_PIXEL_SIZE_X='0'
 CCD_PIXEL_SIZE_Y='0'
 CCD_BITSPERPIXEL='0'
2016-10-19T12:28:36: Client 0: queuing <setNumberVector device='CCD Simulator' name='GUIDER_INFO'>
2016-10-19T12:28:36: Driver indi_simulator_ccd: read setNumberVector CCD Simulator GUIDER_FRAME Idle
          X='0'
          Y='0'
      WIDTH='0'
     HEIGHT='0'
2016-10-19T12:28:36: Client 0: queuing <setNumberVector device='CCD Simulator' name='GUIDER_FRAME'>
2016-10-19T12:28:36: Driver indi_simulator_ccd: read setNumberVector CCD Simulator GUIDER_FRAME Idle
          X='0'
          Y='0'
      WIDTH='500'
     HEIGHT='290'
2016-10-19T12:28:36: Client 0: queuing <setNumberVector device='CCD Simulator' name='GUIDER_FRAME'>
2016-10-19T12:28:36: Driver indi_simulator_ccd: read setNumberVector CCD Simulator GUIDER_INFO Idle
  CCD_MAX_X='500'
  CCD_MAX_Y='290'
 CCD_PIXEL_SIZE='9.8000001907348632812'
 CCD_PIXEL_SIZE_X='9.8000001907348632812'
 CCD_PIXEL_SIZE_Y='12.600000381469726562'
 CCD_BITSPERPIXEL='0'
2016-10-19T12:28:36: Client 0: queuing <setNumberVector device='CCD Simulator' name='GUIDER_INFO'>
2016-10-19T12:28:36: Driver indi_simulator_ccd: read setNumberVector CCD Simulator GUIDER_INFO Idle
  CCD_MAX_X='500'
  CCD_MAX_Y='290'
 CCD_PIXEL_SIZE='9.8000001907348632812'
 CCD_PIXEL_SIZE_X='9.8000001907348632812'
 CCD_PIXEL_SIZE_Y='12.600000381469726562'
 CCD_BITSPERPIXEL='16'
2016-10-19T12:28:36: Client 0: queuing <setNumberVector device='CCD Simulator' name='GUIDER_INFO'>
2016-10-19T12:28:36: Driver indi_simulator_ccd: read defNumberVector CCD Simulator FILTER_SLOT Idle rw
 FILTER_SLOT_VALUE='1'
2016-10-19T12:28:36: Client 0: queuing <defNumberVector device='CCD Simulator' name='FILTER_SLOT'>
2016-10-19T12:28:36: Driver indi_simulator_ccd: queuing snooped <defNumberVector device='CCD Simulator' name='FILTER_SLOT'>
2016-10-19T12:28:36: Driver indi_simulator_ccd: read defTextVector CCD Simulator FILTER_NAME Idle rw
 FILTER_SLOT_NAME_1='Red'
 FILTER_SLOT_NAME_2='Green'
 FILTER_SLOT_NAME_3='Blue'
 FILTER_SLOT_NAME_4='H_Alpha'
 FILTER_SLOT_NAME_5='SII'
 FILTER_SLOT_NAME_6='OIII'
 FILTER_SLOT_NAME_7='LPR'
 FILTER_SLOT_NAME_8='Luminosity'
2016-10-19T12:28:36: Client 0: queuing <defTextVector device='CCD Simulator' name='FILTER_NAME'>
2016-10-19T12:28:36: Driver indi_simulator_ccd: queuing snooped <defTextVector device='CCD Simulator' name='FILTER_NAME'>
2016-10-19T12:28:36: Driver indi_eqmod_telescope: Using prefix /usr/share/indi//indi_eqmod_sk.xml
2016-10-19T12:28:36: Driver indi_eqmod_telescope: Using prefix /usr/share/indi//indi_eqmod_scope_limits_sk.xml
2016-10-19T12:28:36: Driver indi_eqmod_telescope: Using prefix /usr/share/indi//indi_align_sk.xml
2016-10-19T12:28:36: Driver indi_eqmod_telescope: Using prefix /usr/share/indi//indi_eqmod_scope_limits_sk.xml
2016-10-19T12:28:36: Driver indi_eqmod_telescope: read defSwitchVector EQMod Mount TELESCOPE_TRACK_RATE Idle rw
 TRACK_SIDEREAL='Off'
 TRACK_SOLAR='Off'
 TRACK_LUNAR='Off'
 TRACK_CUSTOM='Off'
2016-10-19T12:28:36: Client 0: queuing <defSwitchVector device='EQMod Mount' name='TELESCOPE_TRACK_RATE'>
2016-10-19T12:28:36: Driver indi_eqmod_telescope: read defNumberVector EQMod Mount TRACKRATES Idle rw
 RATRACKRATE='15.041066999999999965'
 DETRACKRATE='0'
2016-10-19T12:28:36: Client 0: queuing <defNumberVector device='EQMod Mount' name='TRACKRATES'>
2016-10-19T12:28:36: Driver indi_eqmod_telescope: read defNumberVector EQMod Mount HORIZONTAL_COORD Idle ro
        ALT='0'
         AZ='0'
2016-10-19T12:28:36: Client 0: queuing <defNumberVector device='EQMod Mount' name='HORIZONTAL_COORD'>
2016-10-19T12:28:36: Driver indi_eqmod_telescope: read defSwitchVector EQMod Mount TELESCOPE_PIER_SIDE Idle ro
  PIER_EAST='On'
  PIER_WEST='Off'
2016-10-19T12:28:36: Client 0: queuing <defSwitchVector device='EQMod Mount' name='TELESCOPE_PIER_SIDE'>
2016-10-19T12:28:36: Driver indi_eqmod_telescope: read defSwitchVector EQMod Mount REVERSEDEC Idle rw
     ENABLE='Off'
    DISABLE='On'
2016-10-19T12:28:36: Client 0: queuing <defSwitchVector device='EQMod Mount' name='REVERSEDEC'>
2016-10-19T12:28:36: Driver indi_eqmod_telescope: read defNumberVector EQMod Mount STANDARDSYNC Idle ro
 STANDARDSYNC_RA='0'
 STANDARDSYNC_DE='0'
2016-10-19T12:28:36: Client 0: queuing <defNumberVector device='EQMod Mount' name='STANDARDSYNC'>
2016-10-19T12:28:36: Driver indi_eqmod_telescope: read defNumberVector EQMod Mount STANDARDSYNCPOINT Idle rw
 STANDARDSYNCPOINT_JD='0'
 STANDARDSYNCPOINT_SYNCTIME='0'
 STANDARDSYNCPOINT_CELESTIAL_RA='0'
 STANDARDSYNCPOINT_CELESTIAL_DE='0'
 STANDARDSYNCPOINT_TELESCOPE_RA='0'
 STANDARDSYNCPOINT_TELESCOPE_DE='0'
2016-10-19T12:28:36: Client 0: queuing <defNumberVector device='EQMod Mount' name='STANDARDSYNCPOINT'>
2016-10-19T12:28:36: Driver indi_eqmod_telescope: read defNumberVector EQMod Mount SYNCPOLARALIGN Idle ro
 SYNCPOLARALIGN_ALT='0'
 SYNCPOLARALIGN_AZ='0'
2016-10-19T12:28:36: Client 0: queuing <defNumberVector device='EQMod Mount' name='SYNCPOLARALIGN'>
2016-10-19T12:28:36: Driver indi_eqmod_telescope: read defSwitchVector EQMod Mount SYNCMANAGE Idle rw
 SYNCCLEARDELTA='Off'
2016-10-19T12:28:36: Client 0: queuing <defSwitchVector device='EQMod Mount' name='SYNCMANAGE'>
2016-10-19T12:28:36: Driver indi_eqmod_telescope: read defNumberVector EQMod Mount BACKLASH Idle rw
 BACKLASHRA='1'
 BACKLASHDE='1'
2016-10-19T12:28:36: Client 0: queuing <defNumberVector device='EQMod Mount' name='BACKLASH'>
2016-10-19T12:28:36: Driver indi_eqmod_telescope: read defSwitchVector EQMod Mount USEBACKLASH Idle rw
 USEBACKLASHRA='Off'
 USEBACKLASHDE='Off'
2016-10-19T12:28:36: Client 0: queuing <defSwitchVector device='EQMod Mount' name='USEBACKLASH'>
2016-10-19T12:28:36: Driver indi_eqmod_telescope: read defSwitchVector EQMod Mount TRACKDEFAULT Idle rw
 TRACK_SIDEREAL='On'
 TRACK_LUNAR='Off'
 TRACK_SOLAR='Off'
 TRACK_CUSTOM='Off'
2016-10-19T12:28:36: Client 0: queuing <defSwitchVector device='EQMod Mount' name='TRACKDEFAULT'>
2016-10-19T12:28:36: Driver indi_eqmod_telescope: read defSwitchVector EQMod Mount ALIGN_METHOD Idle rw
 ALIGN_METHOD_EQMOD='On'
 ALIGN_METHOD_SUBSYSTEM='Off'
2016-10-19T12:28:36: Client 0: queuing <defSwitchVector device='EQMod Mount' name='ALIGN_METHOD'>
2016-10-19T12:28:36: Driver indi_eqmod_telescope: read defSwitchVector EQMod Mount ALIGNSYNCMODE Idle rw
 ALIGNSTANDARDSYNC='Off'
 ALIGNAPPENDSYNC='On'
2016-10-19T12:28:36: Client 0: queuing <defSwitchVector device='EQMod Mount' name='ALIGNSYNCMODE'>
2016-10-19T12:28:36: Driver indi_eqmod_telescope: read setTextVector EQMod Mount MOUNTINFORMATION Idle
 MOUNT_TYPE='EQ6'
 MOTOR_CONTROLLER='0204'
2016-10-19T12:28:36: Client 0: queuing <setTextVector device='EQMod Mount' name='MOUNTINFORMATION'>
2016-10-19T12:28:36: Driver indi_eqmod_telescope: read message EQMod Mount   'dispatch_command: ":a1", 4 bytes written'
2016-10-19T12:28:36: Client 0: queuing <message device='EQMod Mount' name=''>
2016-10-19T12:28:36: Driver indi_eqmod_telescope: read message EQMod Mount   'read_eqmod: "=00B289", 8 bytes read'
2016-10-19T12:28:36: Client 0: queuing <message device='EQMod Mount' name=''>
2016-10-19T12:28:36: Driver indi_eqmod_telescope: read message EQMod Mount   'dispatch_command: ":b1", 4 bytes written'
2016-10-19T12:28:36: Client 0: queuing <message device='EQMod Mount' name=''>
2016-10-19T12:28:36: Driver indi_eqmod_telescope: read message EQMod Mount   'read_eqmod: "=A7FD00", 8 bytes read'
2016-10-19T12:28:36: Client 0: queuing <message device='EQMod Mount' name=''>
2016-10-19T12:28:36: Driver indi_eqmod_telescope: read message EQMod Mount   'dispatch_command: ":g1", 4 bytes written'
2016-10-19T12:28:36: Client 0: queuing <message device='EQMod Mount' name=''>
2016-10-19T12:28:36: Driver indi_eqmod_telescope: read message EQMod Mount   'read_eqmod: "=10", 4 bytes read'
2016-10-19T12:28:36: Client 0: queuing <message device='EQMod Mount' name=''>
2016-10-19T12:28:36: Driver indi_eqmod_telescope: read setNumberVector EQMod Mount STEPPERS Idle
 RASteps360='9024000'
 DESteps360='1'
 RAStepsWorm='64935'
 DEStepsWorm='1'
 RAHighspeedRatio='16'
 DEHighspeedRatio='1'
2016-10-19T12:28:36: Client 0: queuing <setNumberVector device='EQMod Mount' name='STEPPERS'>
2016-10-19T12:28:36: Driver indi_eqmod_telescope: read message EQMod Mount   'dispatch_command: ":a2", 4 bytes written'
2016-10-19T12:28:36: Client 0: queuing <message device='EQMod Mount' name=''>
2016-10-19T12:28:36: Driver indi_eqmod_telescope: read message EQMod Mount   'read_eqmod: "=00B289", 8 bytes read'
2016-10-19T12:28:36: Client 0: queuing <message device='EQMod Mount' name=''>
2016-10-19T12:28:36: Driver indi_eqmod_telescope: read message EQMod Mount   'dispatch_command: ":b2", 4 bytes written'
2016-10-19T12:28:36: Client 0: queuing <message device='EQMod Mount' name=''>
2016-10-19T12:28:36: Driver indi_eqmod_telescope: read message EQMod Mount   'read_eqmod: "=A7FD00", 8 bytes read'
2016-10-19T12:28:36: Client 0: queuing <message device='EQMod Mount' name=''>
2016-10-19T12:28:36: Driver indi_eqmod_telescope: read message EQMod Mount   'dispatch_command: ":g2", 4 bytes written'
2016-10-19T12:28:36: Client 0: queuing <message device='EQMod Mount' name=''>
2016-10-19T12:28:36: Driver indi_eqmod_telescope: read message EQMod Mount   'read_eqmod: "=10", 4 bytes read'
2016-10-19T12:28:36: Client 0: queuing <message device='EQMod Mount' name=''>
2016-10-19T12:28:36: Driver indi_eqmod_telescope: read setNumberVector EQMod Mount STEPPERS Idle
 RASteps360='9024000'
 DESteps360='9024000'
 RAStepsWorm='64935'
 DEStepsWorm='64935'
 RAHighspeedRatio='16'
 DEHighspeedRatio='16'
2016-10-19T12:28:36: Client 0: queuing <setNumberVector device='EQMod Mount' name='STEPPERS'>
2016-10-19T12:28:36: Driver indi_eqmod_telescope: read message EQMod Mount   'dispatch_command: ":f1", 4 bytes written'
2016-10-19T12:28:36: Client 0: queuing <message device='EQMod Mount' name=''>
2016-10-19T12:28:36: Driver indi_eqmod_telescope: read message EQMod Mount   'read_eqmod: "=100", 5 bytes read'
2016-10-19T12:28:36: Client 0: queuing <message device='EQMod Mount' name=''>
2016-10-19T12:28:36: Driver indi_eqmod_telescope: read message EQMod Mount   'dispatch_command: ":f2", 4 bytes written'
2016-10-19T12:28:36: Client 0: queuing <message device='EQMod Mount' name=''>
2016-10-19T12:28:36: Driver indi_eqmod_telescope: read message EQMod Mount   'read_eqmod: "=100", 5 bytes read'
2016-10-19T12:28:36: Client 0: queuing <message device='EQMod Mount' name=''>
2016-10-19T12:28:36: Driver indi_eqmod_telescope: read message EQMod Mount   'dispatch_command: ":j1", 4 bytes written'
2016-10-19T12:28:36: Client 0: queuing <message device='EQMod Mount' name=''>
2016-10-19T12:28:36: Driver indi_eqmod_telescope: read message EQMod Mount   'read_eqmod: "=000080", 8 bytes read'
2016-10-19T12:28:36: Client 0: queuing <message device='EQMod Mount' name=''>
2016-10-19T12:28:36: Driver indi_eqmod_telescope: read message EQMod Mount   'dispatch_command: ":j2", 4 bytes written'
2016-10-19T12:28:36: Client 0: queuing <message device='EQMod Mount' name=''>
2016-10-19T12:28:36: Driver indi_eqmod_telescope: read message EQMod Mount   'read_eqmod: "=000080", 8 bytes read'
2016-10-19T12:28:36: Client 0: queuing <message device='EQMod Mount' name=''>
2016-10-19T12:28:36: Driver indi_eqmod_telescope: read message EQMod Mount   'dispatch_command: ":F1", 4 bytes written'
2016-10-19T12:28:36: Client 0: queuing <message device='EQMod Mount' name=''>
2016-10-19T12:28:36: Driver indi_eqmod_telescope: read message EQMod Mount   'read_eqmod: "=", 2 bytes read'
2016-10-19T12:28:36: Client 0: queuing <message device='EQMod Mount' name=''>
2016-10-19T12:28:36: Driver indi_eqmod_telescope: read message EQMod Mount   'dispatch_command: ":F2", 4 bytes written'
2016-10-19T12:28:36: Client 0: queuing <message device='EQMod Mount' name=''>
2016-10-19T12:28:36: Driver indi_eqmod_telescope: read message EQMod Mount   'read_eqmod: "=", 2 bytes read'
2016-10-19T12:28:36: Client 0: queuing <message device='EQMod Mount' name=''>
2016-10-19T12:28:36: Driver indi_eqmod_telescope: read message EQMod Mount   'Mount is unparked.'
2016-10-19T12:28:36: Client 0: queuing <message device='EQMod Mount' name=''>
2016-10-19T12:28:36: Driver indi_eqmod_telescope: read setSwitchVector EQMod Mount TELESCOPE_PARK Ok
       PARK='Off'
     UNPARK='On'
2016-10-19T12:28:36: Client 0: queuing <setSwitchVector device='EQMod Mount' name='TELESCOPE_PARK'>
2016-10-19T12:28:36: Driver indi_eqmod_telescope: read setNumberVector EQMod Mount TELESCOPE_PARK_POSITION Idle
    PARK_RA='8388608'
   PARK_DEC='10644608'
2016-10-19T12:28:36: Client 0: queuing <setNumberVector device='EQMod Mount' name='TELESCOPE_PARK_POSITION'>
2016-10-19T12:28:36: Driver indi_eqmod_telescope: read message EQMod Mount   'dispatch_command: ":E2806CA2", 10 bytes written'
2016-10-19T12:28:36: Client 0: queuing <message device='EQMod Mount' name=''>
2016-10-19T12:28:36: Driver indi_eqmod_telescope: read message EQMod Mount   'read_eqmod: "=", 2 bytes read'
2016-10-19T12:28:36: Client 0: queuing <message device='EQMod Mount' name=''>
2016-10-19T12:28:36: Driver indi_eqmod_telescope: read setSwitchVector EQMod Mount HEMISPHERE Idle
      NORTH='On'
      SOUTH='Off'
2016-10-19T12:28:36: Client 0: queuing <setSwitchVector device='EQMod Mount' name='HEMISPHERE'>
2016-10-19T12:28:36: Driver indi_eqmod_telescope: read defTextVector EQMod Mount ALIGNDATAFILE Idle rw
 ALIGNDATAFILENAME='~/.indi/AlignData.xml'
2016-10-19T12:28:36: Client 0: queuing <defTextVector device='EQMod Mount' name='ALIGNDATAFILE'>
2016-10-19T12:28:36: Driver indi_eqmod_telescope: read defBLOBVector EQMod Mount ALIGNDATA Idle rw
2016-10-19T12:28:36: Client 0: queuing <defBLOBVector device='EQMod Mount' name='ALIGNDATA'>
2016-10-19T12:28:36: Driver indi_eqmod_telescope: read defNumberVector EQMod Mount ALIGNPOINT Idle rw
 ALIGNPOINT_JD='0'
 ALIGNPOINT_SYNCTIME='0'
 ALIGNPOINT_CELESTIAL_RA='0'
 ALIGNPOINT_CELESTIAL_DE='0'
 ALIGNPOINT_TELESCOPE_RA='0'
 ALIGNPOINT_TELESCOPE_DE='0'
2016-10-19T12:28:36: Client 0: queuing <defNumberVector device='EQMod Mount' name='ALIGNPOINT'>
2016-10-19T12:28:36: Driver indi_eqmod_telescope: read defSwitchVector EQMod Mount ALIGNLIST Idle rw
 ALIGNLISTADD='Off'
 ALIGNLISTCLEAR='Off'
 ALIGNWRITEFILE='Off'
 ALIGNLOADFILE='Off'
2016-10-19T12:28:36: Client 0: queuing <defSwitchVector device='EQMod Mount' name='ALIGNLIST'>
2016-10-19T12:28:36: Driver indi_eqmod_telescope: read defNumberVector EQMod Mount ALIGNTELESCOPECOORDS Idle ro
 ALIGNTELESCOPE_RA='0'
 ALIGNTELESCOPE_DE='0'
2016-10-19T12:28:36: Client 0: queuing <defNumberVector device='EQMod Mount' name='ALIGNTELESCOPECOORDS'>
2016-10-19T12:28:36: Driver indi_eqmod_telescope: read defNumberVector EQMod Mount ALIGNCOUNT Idle ro
 ALIGNCOUNT_POINTS='0'
 ALIGNCOUNT_TRIANGLES='0'
2016-10-19T12:28:36: Client 0: queuing <defNumberVector device='EQMod Mount' name='ALIGNCOUNT'>
2016-10-19T12:28:36: Driver indi_eqmod_telescope: read defSwitchVector EQMod Mount ALIGNMODE Idle rw
    NOALIGN='Off'
 ALIGNNEAREST='Off'
 ALIGNNSTAR='On'
2016-10-19T12:28:36: Client 0: queuing <defSwitchVector device='EQMod Mount' name='ALIGNMODE'>
2016-10-19T12:28:36: Driver indi_eqmod_telescope: read message EQMod Mount   'Can not load Align Data File ~/.indi/AlignData.xml: No such file or directory'
2016-10-19T12:28:36: Client 0: queuing <message device='EQMod Mount' name=''>
2016-10-19T12:28:36: Driver indi_eqmod_telescope: read defTextVector EQMod Mount HORIZONLIMITSDATAFILE Idle rw
 HORIZONLIMITSFILENAME='~/.indi/HorizonData.txt'
2016-10-19T12:28:36: Client 0: queuing <defTextVector device='EQMod Mount' name='HORIZONLIMITSDATAFILE'>
2016-10-19T12:28:36: Driver indi_eqmod_telescope: read defBLOBVector EQMod Mount HORIZONLIMITSDATAFITS Idle ro
2016-10-19T12:28:36: Client 0: queuing <defBLOBVector device='EQMod Mount' name='HORIZONLIMITSDATAFITS'>
2016-10-19T12:28:36: Driver indi_eqmod_telescope: read defNumberVector EQMod Mount HORIZONLIMITSPOINT Idle rw
 HORIZONLIMITS_POINT_AZ='0'
 HORIZONLIMITS_POINT_ALT='0'
2016-10-19T12:28:36: Client 0: queuing <defNumberVector device='EQMod Mount' name='HORIZONLIMITSPOINT'>
2016-10-19T12:28:36: Driver indi_eqmod_telescope: read defSwitchVector EQMod Mount HORIZONLIMITSTRAVERSE Idle rw
 HORIZONLIMITSLISTFIRST='Off'
 HORIZONLIMITSLISTPREV='Off'
 HORIZONLIMITSLISTNEXT='Off'
 HORIZONLIMITSLISTLAST='Off'
2016-10-19T12:28:36: Client 0: queuing <defSwitchVector device='EQMod Mount' name='HORIZONLIMITSTRAVERSE'>
2016-10-19T12:28:36: Driver indi_eqmod_telescope: read defSwitchVector EQMod Mount HORIZONLIMITSMANAGE Idle rw
 HORIZONLIMITSLISTADDCURRENT='Off'
 HORIZONLIMITSLISTDELETE='Off'
 HORIZONLIMITSLISTCLEAR='Off'
2016-10-19T12:28:36: Client 0: queuing <defSwitchVector device='EQMod Mount' name='HORIZONLIMITSMANAGE'>
2016-10-19T12:28:36: Driver indi_eqmod_telescope: read defSwitchVector EQMod Mount HORIZONLIMITSFILEOPERATION Idle rw
 HORIZONLIMITSWRITEFILE='Off'
 HORIZONLIMITSLOADFILE='Off'
2016-10-19T12:28:36: Client 0: queuing <defSwitchVector device='EQMod Mount' name='HORIZONLIMITSFILEOPERATION'>
2016-10-19T12:28:36: Driver indi_eqmod_telescope: read defSwitchVector EQMod Mount HORIZONLIMITSONLIMIT Idle rw
 HORIZONLIMITSONLIMITTRACK='On'
 HORIZONLIMITSONLIMITSLEW='Off'
 HORIZONLIMITSONLIMITGOTO='Off'
2016-10-19T12:28:36: Client 0: queuing <defSwitchVector device='EQMod Mount' name='HORIZONLIMITSONLIMIT'>
2016-10-19T12:28:36: Driver indi_eqmod_telescope: read defSwitchVector EQMod Mount HORIZONLIMITSLIMITGOTO Idle rw
 HORIZONLIMITSLIMITGOTODISABLE='Off'
 HORIZONLIMITSLIMITGOTOENABLE='On'
2016-10-19T12:28:36: Client 0: queuing <defSwitchVector device='EQMod Mount' name='HORIZONLIMITSLIMITGOTO'>
2016-10-19T12:28:36: Driver indi_eqmod_telescope: read setNumberVector EQMod Mount HORIZONLIMITSPOINT Ok
 HORIZONLIMITS_POINT_AZ='0'
 HORIZONLIMITS_POINT_ALT='0'
2016-10-19T12:28:36: Client 0: queuing <setNumberVector device='EQMod Mount' name='HORIZONLIMITSPOINT'>
2016-10-19T12:28:36: Client 0: read newSwitchVector CCD Simulator CONFIG_PROCESS 
 CONFIG_LOAD='On'
 CONFIG_SAVE='Off'
 CONFIG_DEFAULT='Off'
2016-10-19T12:28:36: Driver indi_simulator_ccd: queuing responsible for <newSwitchVector device='CCD Simulator' name='CONFIG_PROCESS'>
2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 138:
<defNumberVector device="CCD Simulator" name="CCD_EXPOSURE" label="Expose" group="Main Control" state="Idle" perm="rw" timeout="60" timestamp="2016-10-19T12:28:36">
    <defNumber name="CCD_EXPOSURE_VALUE" label="Duration (s)" format="%5.2f" min="0.010000000000000000208" max="3600" step="1">
1
    </defNumber>
</defNumberVector>

2016-10-19T12:28:36: Driver indi_simulator_ccd: sending msg copy 2 nq 3:
<defNumberVector device="CCD Simulator" name="FILTER_SLOT" label="Filter Slot" group="Filter Wheel" state="Idle" perm="rw" timeout="60" timestamp="2016-10-19T12:28:36">
    <defNumber name="FILTER_SLOT_VALUE" label="Filter" format="%3.0f" min="1" max="8" step="1">
1
    </defNumber>
</defNumberVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 137:
<defSwitchVector device="CCD Simulator" name="CCD_ABORT_EXPOSURE" label="Expose Abort" group="Main Control" state="Idle" perm="rw" rule="AtMostOne" timeout="60" timestamp="2016-10-19T12:28:36">
    <defSwitch name="ABORT" label="Abort">
Off
    </defSwitch>
</defSwitchVector>

2016-10-19T12:28:36: Driver indi_simulator_ccd: sending msg copy 2 nq 2:
<defTextVector device="CCD Simulator" name="FILTER_NAME" label="Filter names" group="Filter Wheel" state="Idle" perm="rw" timeout="0" timestamp="2016-10-19T12:28:36">
    <defText name="FILTER_SLOT_NAME_1" label="Filter#1">
Red
    </defText>
    <defText name="FILTER_SLOT_NAME_2" label="Filter#2">
Green
    </defText>
    <defText name="FILTER_SLOT_NAME_3" label="Filter#3">
Blue
    </defText>
    <defText name="FILTER_SLOT_NAME_4" label="Filter#4">
H_Alpha
    </defText>
    <defText name="FILTER_SLOT_NAME_5" label="Filter#5">
SII
    </defText>
    <defText name="FILTER_SLOT_NAME_6" label="Filter#6">
OIII
    </defText>
    <defText name="FILTER_SLOT_NAME_7" label="Filter#7">
LPR
    </defText>
    <defText name="FILTER_SLOT_NAME_8" label="Filter#8">
Luminosity
    </defText>
</defTextVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 136:
<defNumberVector device="CCD Simulator" name="CCD_FRAME" label="Frame" group="Image Settings" state="Idle" perm="rw" timeout="60" timestamp="2016-10-19T12:28:36">
    <defNumber name="X" label="Left " format="%4.0f" min="0" max="0" step="0">
0
    </defNumber>
    <defNumber name="Y" label="Top" format="%4.0f" min="0" max="0" step="0">
0
    </defNumber>
    <defNumber name="WIDTH" label="Width" format="%4.0f" min="0" max="0" step="0">
0
    </defNumber>
    <defNumber name="HEIGHT" label="Height" format="%4.0f" min="0" max="0" step="0">
0
    </defNumber>
</defNumberVector>

2016-10-19T12:28:36: Driver indi_simulator_ccd: sending msg copy 1 nq 1:
<newSwitchVector device="CCD Simulator" name="CONFIG_PROCESS">
    <oneSwitch name="CONFIG_LOAD">
On
    </oneSwitch>
    <oneSwitch name="CONFIG_SAVE">
Off
    </oneSwitch>
    <oneSwitch name="CONFIG_DEFAULT">
Off
    </oneSwitch>
</newSwitchVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 135:
<defNumberVector device="CCD Simulator" name="CCD_BINNING" label="Binning" group="Image Settings" state="Idle" perm="rw" timeout="60" timestamp="2016-10-19T12:28:36">
    <defNumber name="HOR_BIN" label="X" format="%2.0f" min="1" max="4" step="1">
1
    </defNumber>
    <defNumber name="VER_BIN" label="Y" format="%2.0f" min="1" max="4" step="1">
1
    </defNumber>
</defNumberVector>

2016-10-19T12:28:36: Driver indi_simulator_ccd: read message CCD Simulator   'Loading device configuration...'
2016-10-19T12:28:36: Client 0: queuing <message device='CCD Simulator' name=''>
2016-10-19T12:28:36: Driver indi_simulator_ccd: read setTextVector CCD Simulator ACTIVE_DEVICES Ok
 ACTIVE_TELESCOPE='Telescope Simulator'
 ACTIVE_FOCUSER='Focuser Simulator'
 ACTIVE_FILTER='CCD Simulator'
2016-10-19T12:28:36: Client 0: queuing <setTextVector device='CCD Simulator' name='ACTIVE_DEVICES'>
2016-10-19T12:28:36: Driver indi_simulator_ccd: read getProperties Telescope Simulator EQUATORIAL_EOD_COORD 
2016-10-19T12:28:36: Driver indi_simulator_ccd: read getProperties Telescope Simulator TELESCOPE_INFO 
2016-10-19T12:28:36: Driver indi_simulator_ccd: read getProperties CCD Simulator FILTER_SLOT 
2016-10-19T12:28:36: Driver indi_simulator_ccd: read getProperties CCD Simulator FILTER_NAME 
2016-10-19T12:28:36: Driver indi_simulator_ccd: read getProperties Telescope Simulator EQUATORIAL_PE 
2016-10-19T12:28:36: Driver indi_simulator_ccd: read getProperties Focuser Simulator FWHM 
2016-10-19T12:28:36: Driver indi_simulator_ccd: read setSwitchVector CCD Simulator UPLOAD_MODE Ok
 UPLOAD_CLIENT='On'
 UPLOAD_LOCAL='Off'
 UPLOAD_BOTH='Off'
2016-10-19T12:28:36: Client 0: queuing <setSwitchVector device='CCD Simulator' name='UPLOAD_MODE'>
2016-10-19T12:28:36: Driver indi_simulator_ccd: read message CCD Simulator   'Upload settings set to client only.'
2016-10-19T12:28:36: Client 0: queuing <message device='CCD Simulator' name=''>
2016-10-19T12:28:36: Driver indi_simulator_ccd: read setTextVector CCD Simulator UPLOAD_SETTINGS Ok
 UPLOAD_DIR=''
 UPLOAD_PREFIX='IMAGE_XXX'
2016-10-19T12:28:36: Client 0: queuing <setTextVector device='CCD Simulator' name='UPLOAD_SETTINGS'>
2016-10-19T12:28:36: Driver indi_simulator_ccd: read setSwitchVector CCD Simulator CCD_COMPRESSION Ok
 CCD_COMPRESS='Off'
    CCD_RAW='On'
2016-10-19T12:28:36: Client 0: queuing <setSwitchVector device='CCD Simulator' name='CCD_COMPRESSION'>
2016-10-19T12:28:36: Driver indi_simulator_ccd: read setSwitchVector CCD Simulator GUIDER_COMPRESSION Ok
 GUIDER_COMPRESS='Off'
 GUIDER_RAW='On'
2016-10-19T12:28:36: Client 0: queuing <setSwitchVector device='CCD Simulator' name='GUIDER_COMPRESSION'>
2016-10-19T12:28:36: Driver indi_simulator_ccd: read setNumberVector CCD Simulator CCD_FRAME Alert 'Error: Invalid range for WIDTH. Valid range is from 1 to 1280. Requested value is 1392'
          X='0'
          Y='0'
      WIDTH='1280'
     HEIGHT='1024'
2016-10-19T12:28:36: Client 0: queuing <setNumberVector device='CCD Simulator' name='CCD_FRAME'>
2016-10-19T12:28:36: Driver indi_simulator_ccd: read setNumberVector CCD Simulator CCD_BINNING Idle
    HOR_BIN='1'
    VER_BIN='1'
2016-10-19T12:28:36: Client 0: queuing <setNumberVector device='CCD Simulator' name='CCD_BINNING'>
2016-10-19T12:28:36: Driver indi_simulator_ccd: read setNumberVector CCD Simulator CCD_BINNING Ok
    HOR_BIN='1'
    VER_BIN='1'
2016-10-19T12:28:36: Client 0: queuing <setNumberVector device='CCD Simulator' name='CCD_BINNING'>
2016-10-19T12:28:36: Driver indi_simulator_ccd: read setTextVector CCD Simulator ASTROMETRY_SETTINGS Ok
 ASTROMETRY_SETTINGS_BINARY='/usr/bin/solve-field'
 ASTROMETRY_SETTINGS_OPTIONS='--no-verify --no-plots --no-fits2fits --resort --downsample 2 -O'
2016-10-19T12:28:36: Client 0: queuing <setTextVector device='CCD Simulator' name='ASTROMETRY_SETTINGS'>
2016-10-19T12:28:36: Driver indi_simulator_ccd: read setNumberVector CCD Simulator CCD_INFO Idle
  CCD_MAX_X='1392'
  CCD_MAX_Y='1040'
 CCD_PIXEL_SIZE='5.1999998092651367188'
 CCD_PIXEL_SIZE_X='5.1999998092651367188'
 CCD_PIXEL_SIZE_Y='5.1999998092651367188'
 CCD_BITSPERPIXEL='16'
2016-10-19T12:28:36: Client 0: queuing <setNumberVector device='CCD Simulator' name='CCD_INFO'>
2016-10-19T12:28:36: Driver indi_simulator_ccd: read setNumberVector CCD Simulator CCD_FRAME Alert
          X='0'
          Y='0'
      WIDTH='1280'
     HEIGHT='1024'
2016-10-19T12:28:36: Client 0: queuing <setNumberVector device='CCD Simulator' name='CCD_FRAME'>
2016-10-19T12:28:36: Driver indi_simulator_ccd: read setNumberVector CCD Simulator CCD_FRAME Alert
          X='0'
          Y='0'
      WIDTH='1392'
     HEIGHT='1040'
2016-10-19T12:28:36: Client 0: queuing <setNumberVector device='CCD Simulator' name='CCD_FRAME'>
2016-10-19T12:28:36: Driver indi_simulator_ccd: read setNumberVector CCD Simulator CCD_BINNING Ok
    HOR_BIN='1'
    VER_BIN='1'
2016-10-19T12:28:36: Client 0: queuing <setNumberVector device='CCD Simulator' name='CCD_BINNING'>
2016-10-19T12:28:36: Driver indi_simulator_ccd: read setNumberVector CCD Simulator CCD_INFO Idle
  CCD_MAX_X='1392'
  CCD_MAX_Y='1040'
 CCD_PIXEL_SIZE='6.4499998092651367188'
 CCD_PIXEL_SIZE_X='6.4499998092651367188'
 CCD_PIXEL_SIZE_Y='6.4499998092651367188'
 CCD_BITSPERPIXEL='16'
2016-10-19T12:28:36: Client 0: queuing <setNumberVector device='CCD Simulator' name='CCD_INFO'>
2016-10-19T12:28:36: Driver indi_simulator_ccd: read setNumberVector CCD Simulator CCD_INFO Idle
  CCD_MAX_X='1392'
  CCD_MAX_Y='1040'
 CCD_PIXEL_SIZE='6.4499998092651367188'
 CCD_PIXEL_SIZE_X='6.4499998092651367188'
 CCD_PIXEL_SIZE_Y='6.4499998092651367188'
 CCD_BITSPERPIXEL='16'
2016-10-19T12:28:36: Client 0: queuing <setNumberVector device='CCD Simulator' name='CCD_INFO'>
2016-10-19T12:28:36: Driver indi_simulator_ccd: read setNumberVector CCD Simulator CCD_TEMPERATURE Idle
 CCD_TEMPERATURE_VALUE='20'
2016-10-19T12:28:36: Client 0: queuing <setNumberVector device='CCD Simulator' name='CCD_TEMPERATURE'>
2016-10-19T12:28:36: Driver indi_simulator_ccd: read setNumberVector CCD Simulator SIMULATOR_SETTINGS Ok
   SIM_XRES='1392'
   SIM_YRES='1040'
  SIM_XSIZE='6.4500000000000001776'
  SIM_YSIZE='6.4500000000000001776'
 SIM_MAXVAL='65000'
   SIM_BIAS='10'
 SIM_SATURATION='1'
 SIM_LIMITINGMAG='17'
  SIM_NOISE='10'
 SIM_SKYGLOW='19.5'
 SIM_OAGOFFSET='0'
  SIM_POLAR='0'
 SIM_POLARDRIFT='0'
 SIM_ROTATION='0'
2016-10-19T12:28:36: Client 0: queuing <setNumberVector device='CCD Simulator' name='SIMULATOR_SETTINGS'>
2016-10-19T12:28:36: Driver indi_simulator_ccd: read setSwitchVector CCD Simulator ON_TIME_FACTOR Ok
         1X='On'
        10X='Off'
       100X='Off'
2016-10-19T12:28:36: Client 0: queuing <setSwitchVector device='CCD Simulator' name='ON_TIME_FACTOR'>
2016-10-19T12:28:36: Driver indi_simulator_ccd: read message CCD Simulator   'Device configuration applied.'
2016-10-19T12:28:36: Client 0: queuing <message device='CCD Simulator' name=''>
2016-10-19T12:28:36: Driver indi_simulator_ccd: read setSwitchVector CCD Simulator CONFIG_PROCESS Ok
 CONFIG_LOAD='Off'
 CONFIG_SAVE='Off'
 CONFIG_DEFAULT='Off'
2016-10-19T12:28:36: Client 0: queuing <setSwitchVector device='CCD Simulator' name='CONFIG_PROCESS'>
2016-10-19T12:28:36: Client 0: read enableBLOB CCD Simulator CCD1  Also
2016-10-19T12:28:36: Driver indi_simulator_ccd: queuing responsible for <enableBLOB device='CCD Simulator' name='CCD1'>
2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 156:
<defNumberVector device="CCD Simulator" name="GUIDER_EXPOSURE" label="Guide Head" group="Main Control" state="Idle" perm="rw" timeout="60" timestamp="2016-10-19T12:28:36">
    <defNumber name="GUIDER_EXPOSURE_VALUE" label="Duration (s)" format="%5.2f" min="0.010000000000000000208" max="3600" step="1">
1
    </defNumber>
</defNumberVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 155:
<defSwitchVector device="CCD Simulator" name="GUIDER_ABORT_EXPOSURE" label="Guide Abort" group="Main Control" state="Idle" perm="rw" rule="AtMostOne" timeout="60" timestamp="2016-10-19T12:28:36">
    <defSwitch name="ABORT" label="Abort">
Off
    </defSwitch>
</defSwitchVector>

2016-10-19T12:28:36: Driver indi_simulator_ccd: sending msg copy 1 nq 1:
<enableBLOB device="CCD Simulator" name="CCD1">
Also
</enableBLOB>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 154:
<defNumberVector device="CCD Simulator" name="GUIDER_FRAME" label="Frame" group="Guider Head" state="Idle" perm="rw" timeout="60" timestamp="2016-10-19T12:28:36">
    <defNumber name="X" label="Left " format="%4.0f" min="0" max="0" step="0">
0
    </defNumber>
    <defNumber name="Y" label="Top" format="%4.0f" min="0" max="0" step="0">
0
    </defNumber>
    <defNumber name="WIDTH" label="Width" format="%4.0f" min="0" max="0" step="0">
0
    </defNumber>
    <defNumber name="HEIGHT" label="Height" format="%4.0f" min="0" max="0" step="0">
0
    </defNumber>
</defNumberVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 153:
<defNumberVector device="CCD Simulator" name="CCD_TEMPERATURE" label="Temperature" group="Main Control" state="Idle" perm="rw" timeout="60" timestamp="2016-10-19T12:28:36">
    <defNumber name="CCD_TEMPERATURE_VALUE" label="Temperature (C)" format="%5.2f" min="-50" max="50" step="0">
0
    </defNumber>
</defNumberVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 152:
<defNumberVector device="CCD Simulator" name="CCD_INFO" label="CCD Information" group="Image Info" state="Idle" perm="ro" timeout="60" timestamp="2016-10-19T12:28:36">
    <defNumber name="CCD_MAX_X" label="Resolution x" format="%4.0f" min="1" max="16000" step="0">
0
    </defNumber>
    <defNumber name="CCD_MAX_Y" label="Resolution y" format="%4.0f" min="1" max="16000" step="0">
0
    </defNumber>
    <defNumber name="CCD_PIXEL_SIZE" label="Pixel size (um)" format="%5.2f" min="1" max="40" step="0">
0
    </defNumber>
    <defNumber name="CCD_PIXEL_SIZE_X" label="Pixel size X" format="%5.2f" min="1" max="40" step="0">
0
    </defNumber>
    <defNumber name="CCD_PIXEL_SIZE_Y" label="Pixel size Y" format="%5.2f" min="1" max="40" step="0">
0
    </defNumber>
    <defNumber name="CCD_BITSPERPIXEL" label="Bits per pixel" format="%3.0f" min="8" max="64" step="0">
0
    </defNumber>
</defNumberVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 151:
<defNumberVector device="CCD Simulator" name="GUIDER_INFO" label="Guide Info" group="Image Info" state="Idle" perm="ro" timeout="60" timestamp="2016-10-19T12:28:36">
    <defNumber name="CCD_MAX_X" label="Resolution x" format="%4.0f" min="1" max="16000" step="0">
0
    </defNumber>
    <defNumber name="CCD_MAX_Y" label="Resolution y" format="%4.0f" min="1" max="16000" step="0">
0
    </defNumber>
    <defNumber name="CCD_PIXEL_SIZE" label="Pixel size (um)" format="%5.2f" min="1" max="40" step="0">
0
    </defNumber>
    <defNumber name="CCD_PIXEL_SIZE_X" label="Pixel size X" format="%5.2f" min="1" max="40" step="0">
0
    </defNumber>
    <defNumber name="CCD_PIXEL_SIZE_Y" label="Pixel size Y" format="%5.2f" min="1" max="40" step="0">
0
    </defNumber>
    <defNumber name="CCD_BITSPERPIXEL" label="Bits per pixel" format="%3.0f" min="8" max="64" step="0">
0
    </defNumber>
</defNumberVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 150:
<defNumberVector device="CCD Simulator" name="GUIDER_BINNING" label="Binning" group="Guider Head" state="Idle" perm="rw" timeout="60" timestamp="2016-10-19T12:28:36">
    <defNumber name="HOR_BIN" label="X" format="%2.0f" min="1" max="4" step="1">
1
    </defNumber>
    <defNumber name="VER_BIN" label="Y" format="%2.0f" min="1" max="4" step="1">
1
    </defNumber>
</defNumberVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 149:
<defSwitchVector device="CCD Simulator" name="CCD_COMPRESSION" label="Image" group="Image Settings" state="Idle" perm="rw" rule="OneOfMany" timeout="60" timestamp="2016-10-19T12:28:36">
    <defSwitch name="CCD_COMPRESS" label="Compress">
Off
    </defSwitch>
    <defSwitch name="CCD_RAW" label="Raw">
On
    </defSwitch>
</defSwitchVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 148:
<defBLOBVector device="CCD Simulator" name="CCD1" label="Image Data" group="Image Info" state="Idle" perm="ro" timeout="60" timestamp="2016-10-19T12:28:36">
    <defBLOB name="CCD1" label="Image"/>
</defBLOBVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 147:
<message device="EQMod Mount" timestamp="2016-10-19T12:28:36" message="Connecting to port /dev/mount at speed 9600"/>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 146:
<message device="EQMod Mount" timestamp="2016-10-19T12:28:36" message="dispatch_command: &quot;:e1&quot;, 4 bytes written"/>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 145:
<message device="EQMod Mount" timestamp="2016-10-19T12:28:36" message="read_eqmod: &quot;=020400&quot;, 8 bytes read"/>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 144:
<message device="EQMod Mount" timestamp="2016-10-19T12:28:36" message="Successfully connected to EQMod Mount."/>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 143:
<setSwitchVector device="EQMod Mount" name="CONNECTION" state="Ok" timeout="60" timestamp="2016-10-19T12:28:36">
    <oneSwitch name="CONNECT">
On
    </oneSwitch>
    <oneSwitch name="DISCONNECT">
Off
    </oneSwitch>
</setSwitchVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 142:
<defSwitchVector device="EQMod Mount" name="ON_COORD_SET" label="On Set" group="Main Control" state="Idle" perm="rw" rule="OneOfMany" timeout="60" timestamp="2016-10-19T12:28:36">
    <defSwitch name="TRACK" label="Track">
On
    </defSwitch>
    <defSwitch name="SLEW" label="Slew">
Off
    </defSwitch>
    <defSwitch name="SYNC" label="Sync">
Off
    </defSwitch>
</defSwitchVector>

2016-10-19T12:28:36: Client 0: read enableBLOB CCD Simulator CCD1  Also
2016-10-19T12:28:36: Driver indi_simulator_ccd: queuing responsible for <enableBLOB device='CCD Simulator' name='CCD1'>
2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 141:
<defNumberVector device="EQMod Mount" name="EQUATORIAL_EOD_COORD" label="Eq. Coordinates" group="Main Control" state="Idle" perm="rw" timeout="60" timestamp="2016-10-19T12:28:36">
    <defNumber name="RA" label="RA (hh:mm:ss)" format="%010.6m" min="0" max="24" step="0">
0
    </defNumber>
    <defNumber name="DEC" label="DEC (dd:mm:ss)" format="%010.6m" min="-90" max="90" step="0">
0
    </defNumber>
</defNumberVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 140:
<defSwitchVector device="EQMod Mount" name="TELESCOPE_ABORT_MOTION" label="Abort Motion" group="Main Control" state="Idle" perm="rw" rule="AtMostOne" timeout="60" timestamp="2016-10-19T12:28:36">
    <defSwitch name="ABORT" label="Abort">
Off
    </defSwitch>
</defSwitchVector>

2016-10-19T12:28:36: Driver indi_simulator_ccd: sending msg copy 1 nq 1:
<enableBLOB device="CCD Simulator" name="CCD1">
Also
</enableBLOB>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 139:
<defSwitchVector device="EQMod Mount" name="TELESCOPE_MOTION_NS" label="Motion N/S" group="Motion Control" state="Idle" perm="rw" rule="AtMostOne" timeout="60" timestamp="2016-10-19T12:28:36">
    <defSwitch name="MOTION_NORTH" label="North">
Off
    </defSwitch>
    <defSwitch name="MOTION_SOUTH" label="South">
Off
    </defSwitch>
</defSwitchVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 138:
<defSwitchVector device="EQMod Mount" name="TELESCOPE_MOTION_WE" label="Motion W/E" group="Motion Control" state="Idle" perm="rw" rule="AtMostOne" timeout="60" timestamp="2016-10-19T12:28:36">
    <defSwitch name="MOTION_WEST" label="West">
Off
    </defSwitch>
    <defSwitch name="MOTION_EAST" label="East">
Off
    </defSwitch>
</defSwitchVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 137:
<defSwitchVector device="EQMod Mount" name="TELESCOPE_SLEW_RATE" label="Slew Rate" group="Motion Control" state="Idle" perm="rw" rule="OneOfMany" timeout="0" timestamp="2016-10-19T12:28:36">
    <defSwitch name="SLEW_GUIDE" label="1x">
Off
    </defSwitch>
    <defSwitch name="2x" label="2x">
Off
    </defSwitch>
    <defSwitch name="SLEW_CENTERING" label="4x">
Off
    </defSwitch>
    <defSwitch name="4x" label="8x">
Off
    </defSwitch>
    <defSwitch name="SLEW_FIND" label="32x">
Off
    </defSwitch>
    <defSwitch name="6x" label="64x">
On
    </defSwitch>
    <defSwitch name="7x" label="128x">
Off
    </defSwitch>
    <defSwitch name="8x" label="600x">
Off
    </defSwitch>
    <defSwitch name="9x" label="700x">
Off
    </defSwitch>
    <defSwitch name="SLEW_MAX" label="800x">
Off
    </defSwitch>
    <defSwitch name="SLEWCUSTOM" label="Custom">
Off
    </defSwitch>
</defSwitchVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 136:
<defTextVector device="EQMod Mount" name="TIME_UTC" label="UTC" group="Site Management" state="Idle" perm="rw" timeout="60" timestamp="2016-10-19T12:28:36">
    <defText name="UTC" label="UTC Time"/>
    <defText name="OFFSET" label="UTC Offset"/>
</defTextVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 135:
<defNumberVector device="EQMod Mount" name="GEOGRAPHIC_COORD" label="Scope Location" group="Site Management" state="Ok" perm="rw" timeout="60" timestamp="2016-10-19T12:28:36">
    <defNumber name="LAT" label="Lat (dd:mm:ss)" format="%010.6m" min="-90" max="90" step="0">
0
    </defNumber>
    <defNumber name="LONG" label="Lon (dd:mm:ss)" format="%010.6m" min="0" max="360" step="0">
0
    </defNumber>
    <defNumber name="ELEV" label="Elevation (m)" format="%g" min="-200" max="10000" step="0">
0
    </defNumber>
</defNumberVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 134:
<defSwitchVector device="EQMod Mount" name="TELESCOPE_PARK" label="Parking" group="Main Control" state="Idle" perm="rw" rule="OneOfMany" timeout="60" timestamp="2016-10-19T12:28:36">
    <defSwitch name="PARK" label="Park">
Off
    </defSwitch>
    <defSwitch name="UNPARK" label="UnPark">
Off
    </defSwitch>
</defSwitchVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 133:
<defNumberVector device="EQMod Mount" name="TELESCOPE_PARK_POSITION" label="Park Position" group="Site Management" state="Idle" perm="rw" timeout="60" timestamp="2016-10-19T12:28:36">
    <defNumber name="PARK_RA" label="RA Encoder" format="%.0f" min="0" max="16777215" step="1">
0
    </defNumber>
    <defNumber name="PARK_DEC" label="DEC Encoder" format="%.0f" min="0" max="16777215" step="1">
0
    </defNumber>
</defNumberVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 132:
<defSwitchVector device="EQMod Mount" name="TELESCOPE_PARK_OPTION" label="Park Options" group="Site Management" state="Idle" perm="rw" rule="AtMostOne" timeout="60" timestamp="2016-10-19T12:28:36">
    <defSwitch name="PARK_CURRENT" label="Current">
Off
    </defSwitch>
    <defSwitch name="PARK_DEFAULT" label="Default">
Off
    </defSwitch>
    <defSwitch name="PARK_WRITE_DATA" label="Write Data">
Off
    </defSwitch>
</defSwitchVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 131:
<defNumberVector device="EQMod Mount" name="TELESCOPE_INFO" label="Scope Properties" group="Options" state="Ok" perm="rw" timeout="60" timestamp="2016-10-19T12:28:36">
    <defNumber name="TELESCOPE_APERTURE" label="Aperture (mm)" format="%g" min="10" max="5000" step="0">
0
    </defNumber>
    <defNumber name="TELESCOPE_FOCAL_LENGTH" label="Focal Length (mm)" format="%g" min="100" max="10000" step="0">
0
    </defNumber>
    <defNumber name="GUIDER_APERTURE" label="Guider Aperture (mm)" format="%g" min="10" max="5000" step="0">
0
    </defNumber>
    <defNumber name="GUIDER_FOCAL_LENGTH" label="Guider Focal Length (mm)" format="%g" min="100" max="10000" step="0">
0
    </defNumber>
</defNumberVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 130:
<defNumberVector device="EQMod Mount" name="TARGET_EOD_COORD" label="Slew Target" group="Motion Control" state="Idle" perm="ro" timeout="60" timestamp="2016-10-19T12:28:36">
    <defNumber name="RA" label="RA (hh:mm:ss)" format="%010.6m" min="0" max="24" step="0">
0
    </defNumber>
    <defNumber name="DEC" label="DEC (dd:mm:ss)" format="%010.6m" min="-90" max="90" step="0">
0
    </defNumber>
</defNumberVector>

2016-10-19T12:28:36: Client 0: read newSwitchVector EQMod Mount CONFIG_PROCESS 
 CONFIG_LOAD='On'
 CONFIG_SAVE='Off'
 CONFIG_DEFAULT='Off'
2016-10-19T12:28:36: Driver indi_eqmod_telescope: queuing responsible for <newSwitchVector device='EQMod Mount' name='CONFIG_PROCESS'>
2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 129:
<defSwitchVector device="EQMod Mount" name="USEJOYSTICK" label="Joystick" group="Options" state="Idle" perm="rw" rule="OneOfMany" timeout="0" timestamp="2016-10-19T12:28:36">
    <defSwitch name="ENABLE" label="Enable">
Off
    </defSwitch>
    <defSwitch name="DISABLE" label="Disable">
On
    </defSwitch>
</defSwitchVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 128:
<defNumberVector device="EQMod Mount" name="TELESCOPE_TIMED_GUIDE_NS" label="Guide N/S" group="Motion Control" state="Idle" perm="rw" timeout="60" timestamp="2016-10-19T12:28:36">
    <defNumber name="TIMED_GUIDE_N" label="North (ms)" format="%.f" min="0" max="60000" step="100">
0
    </defNumber>
    <defNumber name="TIMED_GUIDE_S" label="South (ms)" format="%.f" min="0" max="60000" step="100">
0
    </defNumber>
</defNumberVector>

2016-10-19T12:28:36: Driver indi_eqmod_telescope: sending msg copy 1 nq 1:
<newSwitchVector device="EQMod Mount" name="CONFIG_PROCESS">
    <oneSwitch name="CONFIG_LOAD">
On
    </oneSwitch>
    <oneSwitch name="CONFIG_SAVE">
Off
    </oneSwitch>
    <oneSwitch name="CONFIG_DEFAULT">
Off
    </oneSwitch>
</newSwitchVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 127:
<defNumberVector device="EQMod Mount" name="TELESCOPE_TIMED_GUIDE_WE" label="Guide E/W" group="Motion Control" state="Idle" perm="rw" timeout="60" timestamp="2016-10-19T12:28:36">
    <defNumber name="TIMED_GUIDE_W" label="West (ms)" format="%.f" min="0" max="60000" step="100">
0
    </defNumber>
    <defNumber name="TIMED_GUIDE_E" label="East (ms)" format="%.f" min="0" max="60000" step="100">
0
    </defNumber>
</defNumberVector>

2016-10-19T12:28:36: Driver indi_eqmod_telescope: read message EQMod Mount   'Loading device configuration...'
2016-10-19T12:28:36: Client 0: queuing <message device='EQMod Mount' name=''>
2016-10-19T12:28:36: Driver indi_eqmod_telescope: read setTextVector EQMod Mount ACTIVE_DEVICES Ok
 ACTIVE_GPS='GPS Simulator'
2016-10-19T12:28:36: Client 0: queuing <setTextVector device='EQMod Mount' name='ACTIVE_DEVICES'>
2016-10-19T12:28:36: Driver indi_eqmod_telescope: read getProperties GPS Simulator GEOGRAPHIC_COORD 
2016-10-19T12:28:36: Driver indi_eqmod_telescope: read getProperties GPS Simulator TIME_UTC 
2016-10-19T12:28:36: Driver indi_eqmod_telescope: read setTextVector EQMod Mount DEVICE_PORT Ok
       PORT='/dev/mount'
2016-10-19T12:28:36: Client 0: queuing <setTextVector device='EQMod Mount' name='DEVICE_PORT'>
2016-10-19T12:28:36: Driver indi_eqmod_telescope: read setSwitchVector EQMod Mount TELESCOPE_BAUD_RATE Ok
       9600='On'
      19200='Off'
      38400='Off'
      57600='Off'
     115200='Off'
     230400='Off'
2016-10-19T12:28:36: Client 0: queuing <setSwitchVector device='EQMod Mount' name='TELESCOPE_BAUD_RATE'>
2016-10-19T12:28:36: Driver indi_eqmod_telescope: read setSwitchVector EQMod Mount HEMISPHERE Idle
      NORTH='On'
      SOUTH='Off'
2016-10-19T12:28:36: Client 0: queuing <setSwitchVector device='EQMod Mount' name='HEMISPHERE'>
2016-10-19T12:28:36: Driver indi_eqmod_telescope: read message EQMod Mount   'updateLocation: long = 13.75 lat = 51.05'
2016-10-19T12:28:36: Client 0: queuing <message device='EQMod Mount' name=''>
2016-10-19T12:28:36: Driver indi_eqmod_telescope: read setNumberVector EQMod Mount GEOGRAPHIC_COORD Ok
        LAT='51.049999999999997158'
       LONG='13.75'
       ELEV='0'
2016-10-19T12:28:36: Client 0: queuing <setNumberVector device='EQMod Mount' name='GEOGRAPHIC_COORD'>
2016-10-19T12:28:36: Driver indi_eqmod_telescope: read setNumberVector EQMod Mount TELESCOPE_INFO Ok
 TELESCOPE_APERTURE='200'
 TELESCOPE_FOCAL_LENGTH='1000'
 GUIDER_APERTURE='200'
 GUIDER_FOCAL_LENGTH='1000'
2016-10-19T12:28:36: Client 0: queuing <setNumberVector device='EQMod Mount' name='TELESCOPE_INFO'>
2016-10-19T12:28:36: Driver indi_eqmod_telescope: read setSwitchVector EQMod Mount USEJOYSTICK Ok
     ENABLE='Off'
    DISABLE='On'
2016-10-19T12:28:36: Client 0: queuing <setSwitchVector device='EQMod Mount' name='USEJOYSTICK'>
2016-10-19T12:28:36: Driver indi_eqmod_telescope: read setSwitchVector EQMod Mount ALIGNMODE Ok 'Alignment mode set to N-Star'
    NOALIGN='Off'
 ALIGNNEAREST='Off'
 ALIGNNSTAR='On'
2016-10-19T12:28:36: Client 0: queuing <setSwitchVector device='EQMod Mount' name='ALIGNMODE'>
2016-10-19T12:28:36: Driver indi_eqmod_telescope: read message EQMod Mount   'Device configuration applied.'
2016-10-19T12:28:36: Client 0: queuing <message device='EQMod Mount' name=''>
2016-10-19T12:28:36: Driver indi_eqmod_telescope: read setSwitchVector EQMod Mount CONFIG_PROCESS Ok
 CONFIG_LOAD='Off'
 CONFIG_SAVE='Off'
 CONFIG_DEFAULT='Off'
2016-10-19T12:28:36: Client 0: queuing <setSwitchVector device='EQMod Mount' name='CONFIG_PROCESS'>
2016-10-19T12:28:36: Client 0: read newTextVector EQMod Mount TIME_UTC 
        UTC='2016-10-19T12:28:32'
     OFFSET='2'
2016-10-19T12:28:36: Driver indi_eqmod_telescope: queuing responsible for <newTextVector device='EQMod Mount' name='TIME_UTC'>
2016-10-19T12:28:36: Client 0: read newNumberVector EQMod Mount GEOGRAPHIC_COORD 
        LAT='51.05'
       LONG='13.75'
       ELEV='0'
2016-10-19T12:28:36: Driver indi_eqmod_telescope: queuing responsible for <newNumberVector device='EQMod Mount' name='GEOGRAPHIC_COORD'>
2016-10-19T12:28:36: Client 0: read newTextVector CCD Simulator ACTIVE_DEVICES 
 ACTIVE_TELESCOPE='EQMod Mount'
 ACTIVE_FOCUSER='Focuser Simulator'
 ACTIVE_FILTER='CCD Simulator'
2016-10-19T12:28:36: Driver indi_simulator_ccd: queuing responsible for <newTextVector device='CCD Simulator' name='ACTIVE_DEVICES'>
2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 138:
<defNumberVector device="EQMod Mount" name="SLEWSPEEDS" label="Custom Speeds" group="Motion Control" state="Idle" perm="rw" timeout="0" timestamp="2016-10-19T12:28:36">
    <defNumber name="RASLEW" label="RA Slew" format="%3.2fx" min="0.050000000000000002776" max="800" step="0.050000000000000002776">
64
    </defNumber>
    <defNumber name="DESLEW" label="DE Slew" format="%3.2fx" min="0.050000000000000002776" max="800" step="0.050000000000000002776">
64
    </defNumber>
</defNumberVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 137:
<defNumberVector device="EQMod Mount" name="GUIDE_RATE" label="Guiding Rate" group="Motion Control" state="Idle" perm="rw" timeout="0" timestamp="2016-10-19T12:28:36">
    <defNumber name="GUIDE_RATE_WE" label="W/E Rate" format="%1.1f" min="0" max="1" step="0.10000000000000000555">
0.2999999999999999889
    </defNumber>
    <defNumber name="GUIDE_RATE_NS" label="N/S Rate" format="%1.1f" min="0" max="1" step="0.10000000000000000555">
0.2999999999999999889
    </defNumber>
</defNumberVector>

2016-10-19T12:28:36: Driver indi_simulator_ccd: sending msg copy 1 nq 1:
<newTextVector device="CCD Simulator" name="ACTIVE_DEVICES">
    <oneText name="ACTIVE_TELESCOPE">
EQMod Mount
    </oneText>
    <oneText name="ACTIVE_FOCUSER">
Focuser Simulator
    </oneText>
    <oneText name="ACTIVE_FILTER">
CCD Simulator
    </oneText>
</newTextVector>

2016-10-19T12:28:36: Driver indi_eqmod_telescope: sending msg copy 1 nq 2:
<newTextVector device="EQMod Mount" name="TIME_UTC">
    <oneText name="UTC">
2016-10-19T12:28:32
    </oneText>
    <oneText name="OFFSET">
2
    </oneText>
</newTextVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 136:
<defTextVector device="EQMod Mount" name="MOUNTINFORMATION" label="Mount Information" group="Firmware" state="Idle" perm="ro" timeout="0" timestamp="2016-10-19T12:28:36">
    <defText name="MOUNT_TYPE" label="Mount Type"/>
    <defText name="MOTOR_CONTROLLER" label="Firmware Version"/>
</defTextVector>

2016-10-19T12:28:36: Driver indi_simulator_ccd: read setTextVector CCD Simulator ACTIVE_DEVICES Ok
 ACTIVE_TELESCOPE='EQMod Mount'
 ACTIVE_FOCUSER='Focuser Simulator'
 ACTIVE_FILTER='CCD Simulator'
2016-10-19T12:28:36: Client 0: queuing <setTextVector device='CCD Simulator' name='ACTIVE_DEVICES'>
2016-10-19T12:28:36: Driver indi_simulator_ccd: read getProperties EQMod Mount EQUATORIAL_EOD_COORD 
2016-10-19T12:28:36: Driver indi_simulator_ccd: snooping on EQMod Mount.EQUATORIAL_EOD_COORD
2016-10-19T12:28:36: Driver indi_simulator_ccd: read getProperties EQMod Mount TELESCOPE_INFO 
2016-10-19T12:28:36: Driver indi_simulator_ccd: snooping on EQMod Mount.TELESCOPE_INFO
2016-10-19T12:28:36: Driver indi_simulator_ccd: read getProperties CCD Simulator FILTER_SLOT 
2016-10-19T12:28:36: Driver indi_simulator_ccd: read getProperties CCD Simulator FILTER_NAME 
2016-10-19T12:28:36: Driver indi_simulator_ccd: read getProperties EQMod Mount EQUATORIAL_PE 
2016-10-19T12:28:36: Driver indi_simulator_ccd: snooping on EQMod Mount.EQUATORIAL_PE
2016-10-19T12:28:36: Driver indi_simulator_ccd: read getProperties Focuser Simulator FWHM 
2016-10-19T12:28:36: Driver indi_eqmod_telescope: read message EQMod Mount   'Setting UTC Time to 2016-10-19T12:28:32, Offset 2'
2016-10-19T12:28:36: Client 0: queuing <message device='EQMod Mount' name=''>
2016-10-19T12:28:36: Driver indi_eqmod_telescope: read setTextVector EQMod Mount TIME_UTC Ok
        UTC='2016-10-19T12:28:32'
     OFFSET='2'
2016-10-19T12:28:36: Client 0: queuing <setTextVector device='EQMod Mount' name='TIME_UTC'>
2016-10-19T12:28:36: Driver indi_eqmod_telescope: sending msg copy 1 nq 1:
<newNumberVector device="EQMod Mount" name="GEOGRAPHIC_COORD">
    <oneNumber name="LAT">
51.05
    </oneNumber>
    <oneNumber name="LONG">
13.75
    </oneNumber>
    <oneNumber name="ELEV">
0
    </oneNumber>
</newNumberVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 138:
<defNumberVector device="EQMod Mount" name="STEPPERS" label="Stepper/Gear" group="Firmware" state="Idle" perm="ro" timeout="0" timestamp="2016-10-19T12:28:36">
    <defNumber name="RASteps360" label="RA Steps (Total)" format="%.0f" min="0" max="16777215" step="1">
1
    </defNumber>
    <defNumber name="DESteps360" label="DE Steps (Total)" format="%.0f" min="0" max="16777215" step="1">
1
    </defNumber>
    <defNumber name="RAStepsWorm" label="RA IT Freq." format="%.0f" min="0" max="16777215" step="1">
1
    </defNumber>
    <defNumber name="DEStepsWorm" label="DE IT Freq." format="%.0f" min="0" max="16777215" step="1">
1
    </defNumber>
    <defNumber name="RAHighspeedRatio" label="RA Highspeed ratio" format="%.0f" min="1" max="256" step="1">
1
    </defNumber>
    <defNumber name="DEHighspeedRatio" label="DE Highspeed ratio" format="%.0f" min="1" max="256" step="1">
1
    </defNumber>
</defNumberVector>

2016-10-19T12:28:36: Driver indi_eqmod_telescope: read setNumberVector EQMod Mount GEOGRAPHIC_COORD Ok
        LAT='51.049999999999997158'
       LONG='13.75'
       ELEV='0'
2016-10-19T12:28:36: Client 0: queuing <setNumberVector device='EQMod Mount' name='GEOGRAPHIC_COORD'>
2016-10-19T12:28:36: Driver indi_eqmod_telescope: read setSwitchVector EQMod Mount HEMISPHERE Idle
      NORTH='On'
      SOUTH='Off'
2016-10-19T12:28:36: Client 0: queuing <setSwitchVector device='EQMod Mount' name='HEMISPHERE'>
2016-10-19T12:28:36: Driver indi_eqmod_telescope: read message EQMod Mount   'updateLocation: long = 13.75 lat = 51.05'
2016-10-19T12:28:36: Client 0: queuing <message device='EQMod Mount' name=''>
2016-10-19T12:28:36: Driver indi_eqmod_telescope: read setNumberVector EQMod Mount GEOGRAPHIC_COORD Ok
        LAT='51.049999999999997158'
       LONG='13.75'
       ELEV='0'
2016-10-19T12:28:36: Client 0: queuing <setNumberVector device='EQMod Mount' name='GEOGRAPHIC_COORD'>
2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 141:
<defNumberVector device="EQMod Mount" name="CURRENTSTEPPERS" label="Stepper Position" group="Motor Status" state="Idle" perm="ro" timeout="0" timestamp="2016-10-19T12:28:36">
    <defNumber name="RAStepsCurrent" label="RA Steps" format="%.0f" min="0" max="16777215" step="1">
1
    </defNumber>
    <defNumber name="DEStepsCurrent" label="DE Steps" format="%.0f" min="0" max="16777215" step="1">
1
    </defNumber>
</defNumberVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 140:
<defNumberVector device="EQMod Mount" name="PERIODS" label="Worm Periods" group="Motor Status" state="Idle" perm="ro" timeout="0" timestamp="2016-10-19T12:28:36">
    <defNumber name="RAPERIOD" label="RA Period" format="%.0f" min="0" max="16777215" step="1">
256
    </defNumber>
    <defNumber name="DEPERIOD" label="DE Period" format="%.0f" min="0" max="16777215" step="1">
256
    </defNumber>
</defNumberVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 139:
<defNumberVector device="EQMod Mount" name="JULIAN" label="JD" group="Site Management" state="Idle" perm="ro" timeout="0" timestamp="2016-10-19T12:28:36">
    <defNumber name="JULIANDATE" label="Julian Date" format="%8.8f" min="0" max="9999999999" step="9.999999999999999395e-12">
0
    </defNumber>
</defNumberVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 138:
<defNumberVector device="EQMod Mount" name="TIME_LST" label="LST" group="Site Management" state="Idle" perm="ro" timeout="0" timestamp="2016-10-19T12:28:36">
    <defNumber name="LST" label="Local Sidereal Time" format="%010.6m" min="0" max="24" step="9.9999999999999997989e-13">
12
    </defNumber>
</defNumberVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 137:
<defLightVector device="EQMod Mount" name="RASTATUS" label="RA Motor Status" group="Motor Status" state="Idle" timestamp="2016-10-19T12:28:36">
    <defLight name="RAInitialized" label="Initialized">
Alert
    </defLight>
    <defLight name="RARunning" label="Running">
Idle
    </defLight>
    <defLight name="RAGoto" label="Slew/Goto">
Idle
    </defLight>
    <defLight name="RAForward" label="Backward/Forward">
Idle
    </defLight>
    <defLight name="RAHighspeed" label="Lowspeed/Highspeed">
Idle
    </defLight>
</defLightVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 136:
<defLightVector device="EQMod Mount" name="DESTATUS" label="DE Motor Status" group="Motor Status" state="Idle" timestamp="2016-10-19T12:28:36">
    <defLight name="DEInitialized" label="Initialized">
Alert
    </defLight>
    <defLight name="DERunning" label="Running">
Idle
    </defLight>
    <defLight name="DEGoto" label="Slew/Goto">
Idle
    </defLight>
    <defLight name="DEForward" label="Backward/Forward">
Idle
    </defLight>
    <defLight name="DEHighspeed" label="Lowspeed/Highspeed">
Idle
    </defLight>
</defLightVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 135:
<defSwitchVector device="EQMod Mount" name="HEMISPHERE" label="Hemisphere" group="Site Management" state="Idle" perm="ro" rule="OneOfMany" timeout="0" timestamp="2016-10-19T12:28:36">
    <defSwitch name="NORTH" label="North">
On
    </defSwitch>
    <defSwitch name="SOUTH" label="South">
Off
    </defSwitch>
</defSwitchVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 134:
<defSwitchVector device="CCD Simulator" name="GUIDER_COMPRESSION" label="Image" group="Guider Head" state="Idle" perm="rw" rule="OneOfMany" timeout="60" timestamp="2016-10-19T12:28:36">
    <defSwitch name="GUIDER_COMPRESS" label="Compress">
Off
    </defSwitch>
    <defSwitch name="GUIDER_RAW" label="Raw">
On
    </defSwitch>
</defSwitchVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 133:
<defBLOBVector device="CCD Simulator" name="CCD2" label="Image Data" group="Image Info" state="Idle" perm="ro" timeout="60" timestamp="2016-10-19T12:28:36">
    <defBLOB name="CCD2" label="Guider Image"/>
</defBLOBVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 132:
<defNumberVector device="CCD Simulator" name="TELESCOPE_TIMED_GUIDE_NS" label="Guide N/S" group="Guider Control" state="Idle" perm="rw" timeout="60" timestamp="2016-10-19T12:28:36">
    <defNumber name="TIMED_GUIDE_N" label="North (ms)" format="%.f" min="0" max="60000" step="100">
0
    </defNumber>
    <defNumber name="TIMED_GUIDE_S" label="South (ms)" format="%.f" min="0" max="60000" step="100">
0
    </defNumber>
</defNumberVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 131:
<defNumberVector device="CCD Simulator" name="TELESCOPE_TIMED_GUIDE_WE" label="Guide E/W" group="Guider Control" state="Idle" perm="rw" timeout="60" timestamp="2016-10-19T12:28:36">
    <defNumber name="TIMED_GUIDE_W" label="West (ms)" format="%.f" min="0" max="60000" step="100">
0
    </defNumber>
    <defNumber name="TIMED_GUIDE_E" label="East (ms)" format="%.f" min="0" max="60000" step="100">
0
    </defNumber>
</defNumberVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 130:
<defSwitchVector device="CCD Simulator" name="CCD_FRAME_TYPE" label="Frame Type" group="Image Settings" state="Idle" perm="rw" rule="OneOfMany" timeout="60" timestamp="2016-10-19T12:28:36">
    <defSwitch name="FRAME_LIGHT" label="Light">
On
    </defSwitch>
    <defSwitch name="FRAME_BIAS" label="Bias">
Off
    </defSwitch>
    <defSwitch name="FRAME_DARK" label="Dark">
Off
    </defSwitch>
    <defSwitch name="FRAME_FLAT" label="Flat">
Off
    </defSwitch>
</defSwitchVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 129:
<defSwitchVector device="CCD Simulator" name="CCD_FRAME_RESET" label="Frame Values" group="Image Settings" state="Idle" perm="wo" rule="OneOfMany" timeout="0" timestamp="2016-10-19T12:28:36">
    <defSwitch name="RESET" label="Reset">
Off
    </defSwitch>
</defSwitchVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 128:
<defSwitchVector device="CCD Simulator" name="GUIDER_FRAME_TYPE" label="Frame Type" group="Guider Head" state="Idle" perm="rw" rule="OneOfMany" timeout="60" timestamp="2016-10-19T12:28:36">
    <defSwitch name="FRAME_LIGHT" label="Light">
On
    </defSwitch>
    <defSwitch name="FRAME_BIAS" label="Bias">
Off
    </defSwitch>
    <defSwitch name="FRAME_DARK" label="Dark">
Off
    </defSwitch>
    <defSwitch name="FRAME_FLAT" label="Flat">
Off
    </defSwitch>
</defSwitchVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 127:
<defSwitchVector device="CCD Simulator" name="CCD_RAPID_GUIDE" label="Rapid Guide" group="Options" state="Idle" perm="rw" rule="OneOfMany" timeout="0" timestamp="2016-10-19T12:28:36">
    <defSwitch name="ENABLE" label="Enable">
Off
    </defSwitch>
    <defSwitch name="DISABLE" label="Disable">
On
    </defSwitch>
</defSwitchVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 126:
<defSwitchVector device="CCD Simulator" name="GUIDER_RAPID_GUIDE" label="Guider Head Rapid Guide" group="Options" state="Idle" perm="rw" rule="OneOfMany" timeout="0" timestamp="2016-10-19T12:28:36">
    <defSwitch name="ENABLE" label="Enable">
Off
    </defSwitch>
    <defSwitch name="DISABLE" label="Disable">
On
    </defSwitch>
</defSwitchVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 125:
<defSwitchVector device="CCD Simulator" name="ASTROMETRY_SOLVER" label="Solver" group="Astrometry" state="Idle" perm="rw" rule="OneOfMany" timeout="0" timestamp="2016-10-19T12:28:36">
    <defSwitch name="ASTROMETRY_SOLVER_ENABLE" label="Enable">
Off
    </defSwitch>
    <defSwitch name="ASTROMETRY_SOLVER_DISABLE" label="Disable">
On
    </defSwitch>
</defSwitchVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 124:
<defTextVector device="CCD Simulator" name="ASTROMETRY_SETTINGS" label="Settings" group="Astrometry" state="Idle" perm="wo" timeout="0" timestamp="2016-10-19T12:28:36">
    <defText name="ASTROMETRY_SETTINGS_BINARY" label="Solver">
/usr/bin/solve-field
    </defText>
    <defText name="ASTROMETRY_SETTINGS_OPTIONS" label="Options">
--no-verify --no-plots --no-fits2fits --resort --downsample 2 -O
    </defText>
</defTextVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 123:
<defSwitchVector device="CCD Simulator" name="WCS_CONTROL" label="WCS" group="Astrometry" state="Idle" perm="rw" rule="OneOfMany" timeout="0" timestamp="2016-10-19T12:28:36">
    <defSwitch name="WCS_ENABLE" label="Enable">
Off
    </defSwitch>
    <defSwitch name="WCS_DISABLE" label="Disable">
On
    </defSwitch>
</defSwitchVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 122:
<defSwitchVector device="CCD Simulator" name="UPLOAD_MODE" label="Upload" group="Options" state="Idle" perm="rw" rule="OneOfMany" timeout="0" timestamp="2016-10-19T12:28:36">
    <defSwitch name="UPLOAD_CLIENT" label="Client">
On
    </defSwitch>
    <defSwitch name="UPLOAD_LOCAL" label="Local">
Off
    </defSwitch>
    <defSwitch name="UPLOAD_BOTH" label="Both">
Off
    </defSwitch>
</defSwitchVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 121:
<defTextVector device="CCD Simulator" name="UPLOAD_SETTINGS" label="Upload Settings" group="Options" state="Idle" perm="rw" timeout="60" timestamp="2016-10-19T12:28:36">
    <defText name="UPLOAD_DIR" label="Dir">
/home/pi
    </defText>
    <defText name="UPLOAD_PREFIX" label="Prefix">
IMAGE_XXX
    </defText>
</defTextVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 120:
<defSwitchVector device="CCD Simulator" name="CCD_COOLER" label="Cooler" group="Main Control" state="Idle" perm="wo" rule="OneOfMany" timeout="0" timestamp="2016-10-19T12:28:36">
    <defSwitch name="COOLER_ON" label="ON">
Off
    </defSwitch>
    <defSwitch name="COOLER_OFF" label="OFF">
On
    </defSwitch>
</defSwitchVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 119:
<setNumberVector device="CCD Simulator" name="CCD_INFO" state="Idle" timeout="60" timestamp="2016-10-19T12:28:36">
    <oneNumber name="CCD_MAX_X">
1280
    </oneNumber>
    <oneNumber name="CCD_MAX_Y">
1024
    </oneNumber>
    <oneNumber name="CCD_PIXEL_SIZE">
0
    </oneNumber>
    <oneNumber name="CCD_PIXEL_SIZE_X">
0
    </oneNumber>
    <oneNumber name="CCD_PIXEL_SIZE_Y">
0
    </oneNumber>
    <oneNumber name="CCD_BITSPERPIXEL">
0
    </oneNumber>
</setNumberVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 118:
<setNumberVector device="CCD Simulator" name="CCD_FRAME" state="Idle" timeout="60" timestamp="2016-10-19T12:28:36">
    <oneNumber name="X" min="0" max="1279" step="0">
0
    </oneNumber>
    <oneNumber name="Y" min="0" max="1023" step="0">
0
    </oneNumber>
    <oneNumber name="WIDTH" min="1" max="1280" step="0">
0
    </oneNumber>
    <oneNumber name="HEIGHT" min="0" max="1024" step="0">
0
    </oneNumber>
</setNumberVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 117:
<setNumberVector device="CCD Simulator" name="CCD_FRAME" state="Idle" timeout="60" timestamp="2016-10-19T12:28:36">
    <oneNumber name="X">
0
    </oneNumber>
    <oneNumber name="Y">
0
    </oneNumber>
    <oneNumber name="WIDTH">
1280
    </oneNumber>
    <oneNumber name="HEIGHT">
1024
    </oneNumber>
</setNumberVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 116:
<setNumberVector device="CCD Simulator" name="CCD_BINNING" state="Idle" timeout="60" timestamp="2016-10-19T12:28:36">
    <oneNumber name="HOR_BIN">
1
    </oneNumber>
    <oneNumber name="VER_BIN">
1
    </oneNumber>
</setNumberVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 115:
<setNumberVector device="CCD Simulator" name="CCD_INFO" state="Idle" timeout="60" timestamp="2016-10-19T12:28:36">
    <oneNumber name="CCD_MAX_X">
1280
    </oneNumber>
    <oneNumber name="CCD_MAX_Y">
1024
    </oneNumber>
    <oneNumber name="CCD_PIXEL_SIZE">
5.1999998092651367188
    </oneNumber>
    <oneNumber name="CCD_PIXEL_SIZE_X">
5.1999998092651367188
    </oneNumber>
    <oneNumber name="CCD_PIXEL_SIZE_Y">
5.1999998092651367188
    </oneNumber>
    <oneNumber name="CCD_BITSPERPIXEL">
0
    </oneNumber>
</setNumberVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 114:
<setNumberVector device="CCD Simulator" name="CCD_INFO" state="Idle" timeout="60" timestamp="2016-10-19T12:28:36">
    <oneNumber name="CCD_MAX_X">
1280
    </oneNumber>
    <oneNumber name="CCD_MAX_Y">
1024
    </oneNumber>
    <oneNumber name="CCD_PIXEL_SIZE">
5.1999998092651367188
    </oneNumber>
    <oneNumber name="CCD_PIXEL_SIZE_X">
5.1999998092651367188
    </oneNumber>
    <oneNumber name="CCD_PIXEL_SIZE_Y">
5.1999998092651367188
    </oneNumber>
    <oneNumber name="CCD_BITSPERPIXEL">
16
    </oneNumber>
</setNumberVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 113:
<setNumberVector device="CCD Simulator" name="CCD_TEMPERATURE" state="Idle" timeout="60" timestamp="2016-10-19T12:28:36">
    <oneNumber name="CCD_TEMPERATURE_VALUE">
20
    </oneNumber>
</setNumberVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 112:
<setNumberVector device="CCD Simulator" name="GUIDER_INFO" state="Idle" timeout="60" timestamp="2016-10-19T12:28:36">
    <oneNumber name="CCD_MAX_X">
500
    </oneNumber>
    <oneNumber name="CCD_MAX_Y">
290
    </oneNumber>
    <oneNumber name="CCD_PIXEL_SIZE">
0
    </oneNumber>
    <oneNumber name="CCD_PIXEL_SIZE_X">
0
    </oneNumber>
    <oneNumber name="CCD_PIXEL_SIZE_Y">
0
    </oneNumber>
    <oneNumber name="CCD_BITSPERPIXEL">
0
    </oneNumber>
</setNumberVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 111:
<setNumberVector device="CCD Simulator" name="GUIDER_FRAME" state="Idle" timeout="60" timestamp="2016-10-19T12:28:36">
    <oneNumber name="X" min="0" max="499" step="0">
0
    </oneNumber>
    <oneNumber name="Y" min="0" max="289" step="0">
0
    </oneNumber>
    <oneNumber name="WIDTH" min="1" max="500" step="0">
0
    </oneNumber>
    <oneNumber name="HEIGHT" min="0" max="290" step="0">
0
    </oneNumber>
</setNumberVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 110:
<setNumberVector device="CCD Simulator" name="GUIDER_FRAME" state="Idle" timeout="60" timestamp="2016-10-19T12:28:36">
    <oneNumber name="X">
0
    </oneNumber>
    <oneNumber name="Y">
0
    </oneNumber>
    <oneNumber name="WIDTH">
500
    </oneNumber>
    <oneNumber name="HEIGHT">
290
    </oneNumber>
</setNumberVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 109:
<setNumberVector device="CCD Simulator" name="GUIDER_INFO" state="Idle" timeout="60" timestamp="2016-10-19T12:28:36">
    <oneNumber name="CCD_MAX_X">
500
    </oneNumber>
    <oneNumber name="CCD_MAX_Y">
290
    </oneNumber>
    <oneNumber name="CCD_PIXEL_SIZE">
9.8000001907348632812
    </oneNumber>
    <oneNumber name="CCD_PIXEL_SIZE_X">
9.8000001907348632812
    </oneNumber>
    <oneNumber name="CCD_PIXEL_SIZE_Y">
12.600000381469726562
    </oneNumber>
    <oneNumber name="CCD_BITSPERPIXEL">
0
    </oneNumber>
</setNumberVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 108:
<setNumberVector device="CCD Simulator" name="GUIDER_INFO" state="Idle" timeout="60" timestamp="2016-10-19T12:28:36">
    <oneNumber name="CCD_MAX_X">
500
    </oneNumber>
    <oneNumber name="CCD_MAX_Y">
290
    </oneNumber>
    <oneNumber name="CCD_PIXEL_SIZE">
9.8000001907348632812
    </oneNumber>
    <oneNumber name="CCD_PIXEL_SIZE_X">
9.8000001907348632812
    </oneNumber>
    <oneNumber name="CCD_PIXEL_SIZE_Y">
12.600000381469726562
    </oneNumber>
    <oneNumber name="CCD_BITSPERPIXEL">
16
    </oneNumber>
</setNumberVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 107:
<defNumberVector device="CCD Simulator" name="FILTER_SLOT" label="Filter Slot" group="Filter Wheel" state="Idle" perm="rw" timeout="60" timestamp="2016-10-19T12:28:36">
    <defNumber name="FILTER_SLOT_VALUE" label="Filter" format="%3.0f" min="1" max="8" step="1">
1
    </defNumber>
</defNumberVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 106:
<defTextVector device="CCD Simulator" name="FILTER_NAME" label="Filter names" group="Filter Wheel" state="Idle" perm="rw" timeout="0" timestamp="2016-10-19T12:28:36">
    <defText name="FILTER_SLOT_NAME_1" label="Filter#1">
Red
    </defText>
    <defText name="FILTER_SLOT_NAME_2" label="Filter#2">
Green
    </defText>
    <defText name="FILTER_SLOT_NAME_3" label="Filter#3">
Blue
    </defText>
    <defText name="FILTER_SLOT_NAME_4" label="Filter#4">
H_Alpha
    </defText>
    <defText name="FILTER_SLOT_NAME_5" label="Filter#5">
SII
    </defText>
    <defText name="FILTER_SLOT_NAME_6" label="Filter#6">
OIII
    </defText>
    <defText name="FILTER_SLOT_NAME_7" label="Filter#7">
LPR
    </defText>
    <defText name="FILTER_SLOT_NAME_8" label="Filter#8">
Luminosity
    </defText>
</defTextVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 105:
<defSwitchVector device="EQMod Mount" name="TELESCOPE_TRACK_RATE" label="Track Mode" group="Main Control" state="Idle" perm="rw" rule="AtMostOne" timeout="0" timestamp="2016-10-19T12:28:36">
    <defSwitch name="TRACK_SIDEREAL" label="Sidereal">
Off
    </defSwitch>
    <defSwitch name="TRACK_SOLAR" label="Solar">
Off
    </defSwitch>
    <defSwitch name="TRACK_LUNAR" label="Lunar">
Off
    </defSwitch>
    <defSwitch name="TRACK_CUSTOM" label="Custom">
Off
    </defSwitch>
</defSwitchVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 104:
<defNumberVector device="EQMod Mount" name="TRACKRATES" label="Track Rates" group="Main Control" state="Idle" perm="rw" timeout="0" timestamp="2016-10-19T12:28:36">
    <defNumber name="RATRACKRATE" label="RA (arcsecs/s)" format="%.6f" min="-16384" max="16384" step="9.9999999999999995475e-07">
15.041066999999999965
    </defNumber>
    <defNumber name="DETRACKRATE" label="DE (arcsecs/s)" format="%.6f" min="-16384" max="16384" step="9.9999999999999995475e-07">
0
    </defNumber>
</defNumberVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 103:
<defNumberVector device="EQMod Mount" name="HORIZONTAL_COORD" label="Hor. Coordinates" group="Main Control" state="Idle" perm="ro" timeout="0" timestamp="2016-10-19T12:28:36">
    <defNumber name="ALT" label="Altitude" format="%10.6m" min="-90" max="90" step="0">
0
    </defNumber>
    <defNumber name="AZ" label="Azimuth" format="%10.6m" min="0" max="360" step="0">
0
    </defNumber>
</defNumberVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 102:
<defSwitchVector device="EQMod Mount" name="TELESCOPE_PIER_SIDE" label="Pier Side" group="Main Control" state="Idle" perm="ro" rule="OneOfMany" timeout="0" timestamp="2016-10-19T12:28:36">
    <defSwitch name="PIER_EAST" label="East (pointing west)">
On
    </defSwitch>
    <defSwitch name="PIER_WEST" label="West (pointing east)">
Off
    </defSwitch>
</defSwitchVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 101:
<defSwitchVector device="EQMod Mount" name="REVERSEDEC" label="Reverse DEC" group="Main Control" state="Idle" perm="rw" rule="OneOfMany" timeout="0" timestamp="2016-10-19T12:28:36">
    <defSwitch name="ENABLE" label="Enable">
Off
    </defSwitch>
    <defSwitch name="DISABLE" label="Disable">
On
    </defSwitch>
</defSwitchVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 100:
<defNumberVector device="EQMod Mount" name="STANDARDSYNC" label="Delta" group="Sync" state="Idle" perm="ro" timeout="0" timestamp="2016-10-19T12:28:36">
    <defNumber name="STANDARDSYNC_RA" label="Delta RA (hh:mm:ss)" format="%010.6m" min="0" max="24" step="0">
0
    </defNumber>
    <defNumber name="STANDARDSYNC_DE" label="Delta DE (dd:mm:ss)" format="%010.6m" min="-90" max="90" step="0">
0
    </defNumber>
</defNumberVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 99:
<defNumberVector device="EQMod Mount" name="STANDARDSYNCPOINT" label="Sync Data" group="Sync" state="Idle" perm="rw" timeout="0" timestamp="2016-10-19T12:28:36">
    <defNumber name="STANDARDSYNCPOINT_JD" label="Sync Date" format="%08.8f" min="0" max="9999999999" step="0">
0
    </defNumber>
    <defNumber name="STANDARDSYNCPOINT_SYNCTIME" label="Sync LST" format="%010.6m" min="0" max="24" step="9.9999999999999997989e-13">
0
    </defNumber>
    <defNumber name="STANDARDSYNCPOINT_CELESTIAL_RA" label="Celestial RA (hh:mm:ss)" format="%010.6m" min="0" max="24" step="0">
0
    </defNumber>
    <defNumber name="STANDARDSYNCPOINT_CELESTIAL_DE" label="Celestial DE (dd:mm:ss)" format="%010.6m" min="-90" max="90" step="0">
0
    </defNumber>
    <defNumber name="STANDARDSYNCPOINT_TELESCOPE_RA" label="Telescope RA (hh:mm:ss)" format="%010.6m" min="0" max="24" step="0">
0
    </defNumber>
    <defNumber name="STANDARDSYNCPOINT_TELESCOPE_DE" label="Telescope DE (dd:mm:ss)" format="%010.6m" min="-90" max="90" step="0">
0
    </defNumber>
</defNumberVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 98:
<defNumberVector device="EQMod Mount" name="SYNCPOLARALIGN" label="Polar Align" group="Sync" state="Idle" perm="ro" timeout="0" timestamp="2016-10-19T12:28:36">
    <defNumber name="SYNCPOLARALIGN_ALT" label="Est. Mount Alt." format="%010.6m" min="-90" max="90" step="0">
0
    </defNumber>
    <defNumber name="SYNCPOLARALIGN_AZ" label="Est. Mount AZ." format="%10.6m" min="0" max="360" step="0">
0
    </defNumber>
</defNumberVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 97:
<defSwitchVector device="EQMod Mount" name="SYNCMANAGE" label="Manage Sync" group="Sync" state="Idle" perm="rw" rule="OneOfMany" timeout="0" timestamp="2016-10-19T12:28:36">
    <defSwitch name="SYNCCLEARDELTA" label="Clear Sync Delta">
Off
    </defSwitch>
</defSwitchVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 96:
<defNumberVector device="EQMod Mount" name="BACKLASH" label="Backlash" group="Options" state="Idle" perm="rw" timeout="0" timestamp="2016-10-19T12:28:36">
    <defNumber name="BACKLASHRA" label="RA Backlash (microsteps)" format="%.0f" min="10" max="16777215" step="1">
1
    </defNumber>
    <defNumber name="BACKLASHDE" label="DE Backlash (microsteps)" format="%.0f" min="10" max="16777215" step="1">
1
    </defNumber>
</defNumberVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 95:
<defSwitchVector device="EQMod Mount" name="USEBACKLASH" label="Use Backlash" group="Options" state="Idle" perm="rw" rule="AnyOfMany" timeout="0" timestamp="2016-10-19T12:28:36">
    <defSwitch name="USEBACKLASHRA" label="RA">
Off
    </defSwitch>
    <defSwitch name="USEBACKLASHDE" label="DE">
Off
    </defSwitch>
</defSwitchVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 94:
<defSwitchVector device="EQMod Mount" name="TRACKDEFAULT" label="Track Default" group="Motion Control" state="Idle" perm="rw" rule="OneOfMany" timeout="0" timestamp="2016-10-19T12:28:36">
    <defSwitch name="TRACK_SIDEREAL" label="Sidereal">
On
    </defSwitch>
    <defSwitch name="TRACK_LUNAR" label="Lunar">
Off
    </defSwitch>
    <defSwitch name="TRACK_SOLAR" label="Solar">
Off
    </defSwitch>
    <defSwitch name="TRACK_CUSTOM" label="Custom">
Off
    </defSwitch>
</defSwitchVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 93:
<defSwitchVector device="EQMod Mount" name="ALIGN_METHOD" label="Align Method" group="Options" state="Idle" perm="rw" rule="OneOfMany" timeout="0" timestamp="2016-10-19T12:28:36">
    <defSwitch name="ALIGN_METHOD_EQMOD" label="EQMod Align">
On
    </defSwitch>
    <defSwitch name="ALIGN_METHOD_SUBSYSTEM" label="Alignment Subsystem">
Off
    </defSwitch>
</defSwitchVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 92:
<defSwitchVector device="EQMod Mount" name="ALIGNSYNCMODE" label="Sync. Mode" group="Sync" state="Idle" perm="rw" rule="OneOfMany" timeout="0" timestamp="2016-10-19T12:28:36">
    <defSwitch name="ALIGNSTANDARDSYNC" label="Standard Sync">
Off
    </defSwitch>
    <defSwitch name="ALIGNAPPENDSYNC" label="Add point on Sync">
On
    </defSwitch>
</defSwitchVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 91:
<setTextVector device="EQMod Mount" name="MOUNTINFORMATION" state="Idle" timeout="0" timestamp="2016-10-19T12:28:36">
    <oneText name="MOUNT_TYPE">
EQ6
    </oneText>
    <oneText name="MOTOR_CONTROLLER">
0204
    </oneText>
</setTextVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 90:
<message device="EQMod Mount" timestamp="2016-10-19T12:28:36" message="dispatch_command: &quot;:a1&quot;, 4 bytes written"/>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 89:
<message device="EQMod Mount" timestamp="2016-10-19T12:28:36" message="read_eqmod: &quot;=00B289&quot;, 8 bytes read"/>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 88:
<message device="EQMod Mount" timestamp="2016-10-19T12:28:36" message="dispatch_command: &quot;:b1&quot;, 4 bytes written"/>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 87:
<message device="EQMod Mount" timestamp="2016-10-19T12:28:36" message="read_eqmod: &quot;=A7FD00&quot;, 8 bytes read"/>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 86:
<message device="EQMod Mount" timestamp="2016-10-19T12:28:36" message="dispatch_command: &quot;:g1&quot;, 4 bytes written"/>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 85:
<message device="EQMod Mount" timestamp="2016-10-19T12:28:36" message="read_eqmod: &quot;=10&quot;, 4 bytes read"/>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 84:
<setNumberVector device="EQMod Mount" name="STEPPERS" state="Idle" timeout="0" timestamp="2016-10-19T12:28:36">
    <oneNumber name="RASteps360">
9024000
    </oneNumber>
    <oneNumber name="DESteps360">
1
    </oneNumber>
    <oneNumber name="RAStepsWorm">
64935
    </oneNumber>
    <oneNumber name="DEStepsWorm">
1
    </oneNumber>
    <oneNumber name="RAHighspeedRatio">
16
    </oneNumber>
    <oneNumber name="DEHighspeedRatio">
1
    </oneNumber>
</setNumberVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 83:
<message device="EQMod Mount" timestamp="2016-10-19T12:28:36" message="dispatch_command: &quot;:a2&quot;, 4 bytes written"/>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 82:
<message device="EQMod Mount" timestamp="2016-10-19T12:28:36" message="read_eqmod: &quot;=00B289&quot;, 8 bytes read"/>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 81:
<message device="EQMod Mount" timestamp="2016-10-19T12:28:36" message="dispatch_command: &quot;:b2&quot;, 4 bytes written"/>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 80:
<message device="EQMod Mount" timestamp="2016-10-19T12:28:36" message="read_eqmod: &quot;=A7FD00&quot;, 8 bytes read"/>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 79:
<message device="EQMod Mount" timestamp="2016-10-19T12:28:36" message="dispatch_command: &quot;:g2&quot;, 4 bytes written"/>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 78:
<message device="EQMod Mount" timestamp="2016-10-19T12:28:36" message="read_eqmod: &quot;=10&quot;, 4 bytes read"/>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 77:
<setNumberVector device="EQMod Mount" name="STEPPERS" state="Idle" timeout="0" timestamp="2016-10-19T12:28:36">
    <oneNumber name="RASteps360">
9024000
    </oneNumber>
    <oneNumber name="DESteps360">
9024000
    </oneNumber>
    <oneNumber name="RAStepsWorm">
64935
    </oneNumber>
    <oneNumber name="DEStepsWorm">
64935
    </oneNumber>
    <oneNumber name="RAHighspeedRatio">
16
    </oneNumber>
    <oneNumber name="DEHighspeedRatio">
16
    </oneNumber>
</setNumberVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 76:
<message device="EQMod Mount" timestamp="2016-10-19T12:28:36" message="dispatch_command: &quot;:f1&quot;, 4 bytes written"/>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 75:
<message device="EQMod Mount" timestamp="2016-10-19T12:28:36" message="read_eqmod: &quot;=100&quot;, 5 bytes read"/>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 74:
<message device="EQMod Mount" timestamp="2016-10-19T12:28:36" message="dispatch_command: &quot;:f2&quot;, 4 bytes written"/>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 73:
<message device="EQMod Mount" timestamp="2016-10-19T12:28:36" message="read_eqmod: &quot;=100&quot;, 5 bytes read"/>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 72:
<message device="EQMod Mount" timestamp="2016-10-19T12:28:36" message="dispatch_command: &quot;:j1&quot;, 4 bytes written"/>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 71:
<message device="EQMod Mount" timestamp="2016-10-19T12:28:36" message="read_eqmod: &quot;=000080&quot;, 8 bytes read"/>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 70:
<message device="EQMod Mount" timestamp="2016-10-19T12:28:36" message="dispatch_command: &quot;:j2&quot;, 4 bytes written"/>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 69:
<message device="EQMod Mount" timestamp="2016-10-19T12:28:36" message="read_eqmod: &quot;=000080&quot;, 8 bytes read"/>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 68:
<message device="EQMod Mount" timestamp="2016-10-19T12:28:36" message="dispatch_command: &quot;:F1&quot;, 4 bytes written"/>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 67:
<message device="EQMod Mount" timestamp="2016-10-19T12:28:36" message="read_eqmod: &quot;=&quot;, 2 bytes read"/>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 66:
<message device="EQMod Mount" timestamp="2016-10-19T12:28:36" message="dispatch_command: &quot;:F2&quot;, 4 bytes written"/>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 65:
<message device="EQMod Mount" timestamp="2016-10-19T12:28:36" message="read_eqmod: &quot;=&quot;, 2 bytes read"/>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 64:
<message device="EQMod Mount" timestamp="2016-10-19T12:28:36" message="Mount is unparked."/>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 63:
<setSwitchVector device="EQMod Mount" name="TELESCOPE_PARK" state="Ok" timeout="60" timestamp="2016-10-19T12:28:36">
    <oneSwitch name="PARK">
Off
    </oneSwitch>
    <oneSwitch name="UNPARK">
On
    </oneSwitch>
</setSwitchVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 62:
<setNumberVector device="EQMod Mount" name="TELESCOPE_PARK_POSITION" state="Idle" timeout="60" timestamp="2016-10-19T12:28:36">
    <oneNumber name="PARK_RA">
8388608
    </oneNumber>
    <oneNumber name="PARK_DEC">
10644608
    </oneNumber>
</setNumberVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 61:
<message device="EQMod Mount" timestamp="2016-10-19T12:28:36" message="dispatch_command: &quot;:E2806CA2&quot;, 10 bytes written"/>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 60:
<message device="EQMod Mount" timestamp="2016-10-19T12:28:36" message="read_eqmod: &quot;=&quot;, 2 bytes read"/>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 59:
<setSwitchVector device="EQMod Mount" name="HEMISPHERE" state="Idle" timeout="0" timestamp="2016-10-19T12:28:36">
    <oneSwitch name="NORTH">
On
    </oneSwitch>
    <oneSwitch name="SOUTH">
Off
    </oneSwitch>
</setSwitchVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 58:
<defTextVector device="EQMod Mount" name="ALIGNDATAFILE" label="Data File" group="Align" state="Idle" perm="rw" timeout="0" timestamp="2016-10-19T12:28:36">
    <defText name="ALIGNDATAFILENAME" label="Name">
~/.indi/AlignData.xml
    </defText>
</defTextVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 57:
<defBLOBVector device="EQMod Mount" name="ALIGNDATA" label="Align Data" group="Align" state="Idle" perm="rw" timeout="0" timestamp="2016-10-19T12:28:36">
    <defBLOB name="POINTLIST" label="Points List"/>
    <defBLOB name="TRIANGULATION" label="Triangulation"/>
</defBLOBVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 56:
<defNumberVector device="EQMod Mount" name="ALIGNPOINT" label="Alignment Point" group="Align" state="Idle" perm="rw" timeout="0" timestamp="2016-10-19T12:28:36">
    <defNumber name="ALIGNPOINT_JD" label="Sync Date" format="%08.8f" min="0" max="9999999999" step="0">
0
    </defNumber>
    <defNumber name="ALIGNPOINT_SYNCTIME" label="Sync LST" format="%010.6m" min="0" max="24" step="9.9999999999999997989e-13">
0
    </defNumber>
    <defNumber name="ALIGNPOINT_CELESTIAL_RA" label="Celestial RA (hh:mm:ss)" format="%010.6m" min="0" max="24" step="0">
0
    </defNumber>
    <defNumber name="ALIGNPOINT_CELESTIAL_DE" label="Celestial DE (dd:mm:ss)" format="%010.6m" min="-90" max="90" step="0">
0
    </defNumber>
    <defNumber name="ALIGNPOINT_TELESCOPE_RA" label="Telescope RA (hh:mm:ss)" format="%010.6m" min="0" max="24" step="0">
0
    </defNumber>
    <defNumber name="ALIGNPOINT_TELESCOPE_DE" label="Telescope DE (dd:mm:ss)" format="%010.6m" min="-90" max="90" step="0">
0
    </defNumber>
</defNumberVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 55:
<defSwitchVector device="EQMod Mount" name="ALIGNLIST" label="Manage List" group="Align" state="Idle" perm="rw" rule="OneOfMany" timeout="0" timestamp="2016-10-19T12:28:36">
    <defSwitch name="ALIGNLISTADD" label="Add point">
Off
    </defSwitch>
    <defSwitch name="ALIGNLISTCLEAR" label="Clear List">
Off
    </defSwitch>
    <defSwitch name="ALIGNWRITEFILE" label="Write File">
Off
    </defSwitch>
    <defSwitch name="ALIGNLOADFILE" label="Load File">
Off
    </defSwitch>
</defSwitchVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 54:
<defNumberVector device="EQMod Mount" name="ALIGNTELESCOPECOORDS" label="Telescope Coords" group="Align" state="Idle" perm="ro" timeout="0" timestamp="2016-10-19T12:28:36">
    <defNumber name="ALIGNTELESCOPE_RA" label="Telescope RA (hh:mm:ss)" format="%010.6m" min="0" max="24" step="0">
0
    </defNumber>
    <defNumber name="ALIGNTELESCOPE_DE" label="Telescope DE (dd:mm:ss)" format="%010.6m" min="-90" max="90" step="0">
0
    </defNumber>
</defNumberVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 53:
<defNumberVector device="EQMod Mount" name="ALIGNCOUNT" label="Number of" group="Align" state="Idle" perm="ro" timeout="0" timestamp="2016-10-19T12:28:36">
    <defNumber name="ALIGNCOUNT_POINTS" label="Points" format="%.0f" min="0" max="10000" step="1">
0
    </defNumber>
    <defNumber name="ALIGNCOUNT_TRIANGLES" label="Triangles" format="%.0f" min="0" max="1000000" step="1">
0
    </defNumber>
</defNumberVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 52:
<defSwitchVector device="EQMod Mount" name="ALIGNMODE" label="Alignment Mode" group="Align" state="Idle" perm="rw" rule="OneOfMany" timeout="0" timestamp="2016-10-19T12:28:36">
    <defSwitch name="NOALIGN" label="No Alignment">
Off
    </defSwitch>
    <defSwitch name="ALIGNNEAREST" label="Nearest Point">
Off
    </defSwitch>
    <defSwitch name="ALIGNNSTAR" label="N-Star">
On
    </defSwitch>
</defSwitchVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 51:
<message device="EQMod Mount" timestamp="2016-10-19T12:28:36" message="Can not load Align Data File ~/.indi/AlignData.xml: No such file or directory"/>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 50:
<defTextVector device="EQMod Mount" name="HORIZONLIMITSDATAFILE" label="Horizon File" group="Horizon" state="Idle" perm="rw" timeout="0" timestamp="2016-10-19T12:28:36">
    <defText name="HORIZONLIMITSFILENAME" label="Name">
~/.indi/HorizonData.txt
    </defText>
</defTextVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 49:
<defBLOBVector device="EQMod Mount" name="HORIZONLIMITSDATAFITS" label="Display" group="Horizon" state="Idle" perm="ro" timeout="0" timestamp="2016-10-19T12:28:36">
    <defBLOB name="HORIZONPOINTS" label="Horizon"/>
</defBLOBVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 48:
<defNumberVector device="EQMod Mount" name="HORIZONLIMITSPOINT" label="Horizon Point" group="Horizon" state="Idle" perm="rw" timeout="0" timestamp="2016-10-19T12:28:36">
    <defNumber name="HORIZONLIMITS_POINT_AZ" label="Azimuth (dd:mm:ss)" format="%010.6m" min="0" max="360" step="0">
0
    </defNumber>
    <defNumber name="HORIZONLIMITS_POINT_ALT" label="Altitude(dd:mm:ss)" format="%010.6m" min="-90" max="90" step="0">
0
    </defNumber>
</defNumberVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 47:
<defSwitchVector device="EQMod Mount" name="HORIZONLIMITSTRAVERSE" label="Traversal" group="Horizon" state="Idle" perm="rw" rule="OneOfMany" timeout="0" timestamp="2016-10-19T12:28:36">
    <defSwitch name="HORIZONLIMITSLISTFIRST" label="First">
Off
    </defSwitch>
    <defSwitch name="HORIZONLIMITSLISTPREV" label="Prev.">
Off
    </defSwitch>
    <defSwitch name="HORIZONLIMITSLISTNEXT" label="Next">
Off
    </defSwitch>
    <defSwitch name="HORIZONLIMITSLISTLAST" label="Last">
Off
    </defSwitch>
</defSwitchVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 46:
<defSwitchVector device="EQMod Mount" name="HORIZONLIMITSMANAGE" label="Manage" group="Horizon" state="Idle" perm="rw" rule="OneOfMany" timeout="0" timestamp="2016-10-19T12:28:36">
    <defSwitch name="HORIZONLIMITSLISTADDCURRENT" label="Add Current Scope Az/Alt">
Off
    </defSwitch>
    <defSwitch name="HORIZONLIMITSLISTDELETE" label="Delete Point">
Off
    </defSwitch>
    <defSwitch name="HORIZONLIMITSLISTCLEAR" label="Clear List">
Off
    </defSwitch>
</defSwitchVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 45:
<defSwitchVector device="EQMod Mount" name="HORIZONLIMITSFILEOPERATION" label="Operation" group="Horizon" state="Idle" perm="rw" rule="OneOfMany" timeout="0" timestamp="2016-10-19T12:28:36">
    <defSwitch name="HORIZONLIMITSWRITEFILE" label="Write File">
Off
    </defSwitch>
    <defSwitch name="HORIZONLIMITSLOADFILE" label="Load File">
Off
    </defSwitch>
</defSwitchVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 44:
<defSwitchVector device="EQMod Mount" name="HORIZONLIMITSONLIMIT" label="On Limit" group="Horizon" state="Idle" perm="rw" rule="AnyOfMany" timeout="0" timestamp="2016-10-19T12:28:36">
    <defSwitch name="HORIZONLIMITSONLIMITTRACK" label="Abort Tracking">
On
    </defSwitch>
    <defSwitch name="HORIZONLIMITSONLIMITSLEW" label="Abort Slewing">
Off
    </defSwitch>
    <defSwitch name="HORIZONLIMITSONLIMITGOTO" label="Abort Goto">
Off
    </defSwitch>
</defSwitchVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 43:
<defSwitchVector device="EQMod Mount" name="HORIZONLIMITSLIMITGOTO" label="Limit Goto" group="Horizon" state="Idle" perm="rw" rule="OneOfMany" timeout="0" timestamp="2016-10-19T12:28:36">
    <defSwitch name="HORIZONLIMITSLIMITGOTODISABLE" label="Disable">
Off
    </defSwitch>
    <defSwitch name="HORIZONLIMITSLIMITGOTOENABLE" label="Enable">
On
    </defSwitch>
</defSwitchVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 42:
<setNumberVector device="EQMod Mount" name="HORIZONLIMITSPOINT" state="Ok" timeout="0" timestamp="2016-10-19T12:28:36">
    <oneNumber name="HORIZONLIMITS_POINT_AZ">
0
    </oneNumber>
    <oneNumber name="HORIZONLIMITS_POINT_ALT">
0
    </oneNumber>
</setNumberVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 41:
<message device="CCD Simulator" timestamp="2016-10-19T12:28:36" message="Loading device configuration..."/>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 40:
<setTextVector device="CCD Simulator" name="ACTIVE_DEVICES" state="Ok" timeout="60" timestamp="2016-10-19T12:28:36">
    <oneText name="ACTIVE_TELESCOPE">
Telescope Simulator
    </oneText>
    <oneText name="ACTIVE_FOCUSER">
Focuser Simulator
    </oneText>
    <oneText name="ACTIVE_FILTER">
CCD Simulator
    </oneText>
</setTextVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 39:
<setSwitchVector device="CCD Simulator" name="UPLOAD_MODE" state="Ok" timeout="0" timestamp="2016-10-19T12:28:36">
    <oneSwitch name="UPLOAD_CLIENT">
On
    </oneSwitch>
    <oneSwitch name="UPLOAD_LOCAL">
Off
    </oneSwitch>
    <oneSwitch name="UPLOAD_BOTH">
Off
    </oneSwitch>
</setSwitchVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 38:
<message device="CCD Simulator" timestamp="2016-10-19T12:28:36" message="Upload settings set to client only."/>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 37:
<setTextVector device="CCD Simulator" name="UPLOAD_SETTINGS" state="Ok" timeout="60" timestamp="2016-10-19T12:28:36">
    <oneText name="UPLOAD_DIR"/>
    <oneText name="UPLOAD_PREFIX">
IMAGE_XXX
    </oneText>
</setTextVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 36:
<setSwitchVector device="CCD Simulator" name="CCD_COMPRESSION" state="Ok" timeout="60" timestamp="2016-10-19T12:28:36">
    <oneSwitch name="CCD_COMPRESS">
Off
    </oneSwitch>
    <oneSwitch name="CCD_RAW">
On
    </oneSwitch>
</setSwitchVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 35:
<setSwitchVector device="CCD Simulator" name="GUIDER_COMPRESSION" state="Ok" timeout="60" timestamp="2016-10-19T12:28:36">
    <oneSwitch name="GUIDER_COMPRESS">
Off
    </oneSwitch>
    <oneSwitch name="GUIDER_RAW">
On
    </oneSwitch>
</setSwitchVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 34:
<setNumberVector device="CCD Simulator" name="CCD_FRAME" state="Alert" timeout="60" timestamp="2016-10-19T12:28:36" message="Error: Invalid range for WIDTH. Valid range is from 1 to 1280. Requested value is 1392">
    <oneNumber name="X">
0
    </oneNumber>
    <oneNumber name="Y">
0
    </oneNumber>
    <oneNumber name="WIDTH">
1280
    </oneNumber>
    <oneNumber name="HEIGHT">
1024
    </oneNumber>
</setNumberVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 33:
<setNumberVector device="CCD Simulator" name="CCD_BINNING" state="Idle" timeout="60" timestamp="2016-10-19T12:28:36">
    <oneNumber name="HOR_BIN">
1
    </oneNumber>
    <oneNumber name="VER_BIN">
1
    </oneNumber>
</setNumberVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 32:
<setNumberVector device="CCD Simulator" name="CCD_BINNING" state="Ok" timeout="60" timestamp="2016-10-19T12:28:36">
    <oneNumber name="HOR_BIN">
1
    </oneNumber>
    <oneNumber name="VER_BIN">
1
    </oneNumber>
</setNumberVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 31:
<setTextVector device="CCD Simulator" name="ASTROMETRY_SETTINGS" state="Ok" timeout="0" timestamp="2016-10-19T12:28:36">
    <oneText name="ASTROMETRY_SETTINGS_BINARY">
/usr/bin/solve-field
    </oneText>
    <oneText name="ASTROMETRY_SETTINGS_OPTIONS">
--no-verify --no-plots --no-fits2fits --resort --downsample 2 -O
    </oneText>
</setTextVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 30:
<setNumberVector device="CCD Simulator" name="CCD_INFO" state="Idle" timeout="60" timestamp="2016-10-19T12:28:36">
    <oneNumber name="CCD_MAX_X">
1392
    </oneNumber>
    <oneNumber name="CCD_MAX_Y">
1040
    </oneNumber>
    <oneNumber name="CCD_PIXEL_SIZE">
5.1999998092651367188
    </oneNumber>
    <oneNumber name="CCD_PIXEL_SIZE_X">
5.1999998092651367188
    </oneNumber>
    <oneNumber name="CCD_PIXEL_SIZE_Y">
5.1999998092651367188
    </oneNumber>
    <oneNumber name="CCD_BITSPERPIXEL">
16
    </oneNumber>
</setNumberVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 29:
<setNumberVector device="CCD Simulator" name="CCD_FRAME" state="Alert" timeout="60" timestamp="2016-10-19T12:28:36">
    <oneNumber name="X" min="0" max="1391" step="0">
0
    </oneNumber>
    <oneNumber name="Y" min="0" max="1039" step="0">
0
    </oneNumber>
    <oneNumber name="WIDTH" min="1" max="1392" step="0">
1280
    </oneNumber>
    <oneNumber name="HEIGHT" min="0" max="1040" step="0">
1024
    </oneNumber>
</setNumberVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 28:
<setNumberVector device="CCD Simulator" name="CCD_FRAME" state="Alert" timeout="60" timestamp="2016-10-19T12:28:36">
    <oneNumber name="X">
0
    </oneNumber>
    <oneNumber name="Y">
0
    </oneNumber>
    <oneNumber name="WIDTH">
1392
    </oneNumber>
    <oneNumber name="HEIGHT">
1040
    </oneNumber>
</setNumberVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 27:
<setNumberVector device="CCD Simulator" name="CCD_BINNING" state="Ok" timeout="60" timestamp="2016-10-19T12:28:36">
    <oneNumber name="HOR_BIN">
1
    </oneNumber>
    <oneNumber name="VER_BIN">
1
    </oneNumber>
</setNumberVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 26:
<setNumberVector device="CCD Simulator" name="CCD_INFO" state="Idle" timeout="60" timestamp="2016-10-19T12:28:36">
    <oneNumber name="CCD_MAX_X">
1392
    </oneNumber>
    <oneNumber name="CCD_MAX_Y">
1040
    </oneNumber>
    <oneNumber name="CCD_PIXEL_SIZE">
6.4499998092651367188
    </oneNumber>
    <oneNumber name="CCD_PIXEL_SIZE_X">
6.4499998092651367188
    </oneNumber>
    <oneNumber name="CCD_PIXEL_SIZE_Y">
6.4499998092651367188
    </oneNumber>
    <oneNumber name="CCD_BITSPERPIXEL">
16
    </oneNumber>
</setNumberVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 25:
<setNumberVector device="CCD Simulator" name="CCD_INFO" state="Idle" timeout="60" timestamp="2016-10-19T12:28:36">
    <oneNumber name="CCD_MAX_X">
1392
    </oneNumber>
    <oneNumber name="CCD_MAX_Y">
1040
    </oneNumber>
    <oneNumber name="CCD_PIXEL_SIZE">
6.4499998092651367188
    </oneNumber>
    <oneNumber name="CCD_PIXEL_SIZE_X">
6.4499998092651367188
    </oneNumber>
    <oneNumber name="CCD_PIXEL_SIZE_Y">
6.4499998092651367188
    </oneNumber>
    <oneNumber name="CCD_BITSPERPIXEL">
16
    </oneNumber>
</setNumberVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 24:
<setNumberVector device="CCD Simulator" name="CCD_TEMPERATURE" state="Idle" timeout="60" timestamp="2016-10-19T12:28:36">
    <oneNumber name="CCD_TEMPERATURE_VALUE">
20
    </oneNumber>
</setNumberVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 23:
<setNumberVector device="CCD Simulator" name="SIMULATOR_SETTINGS" state="Ok" timeout="60" timestamp="2016-10-19T12:28:36">
    <oneNumber name="SIM_XRES">
1392
    </oneNumber>
    <oneNumber name="SIM_YRES">
1040
    </oneNumber>
    <oneNumber name="SIM_XSIZE">
6.4500000000000001776
    </oneNumber>
    <oneNumber name="SIM_YSIZE">
6.4500000000000001776
    </oneNumber>
    <oneNumber name="SIM_MAXVAL">
65000
    </oneNumber>
    <oneNumber name="SIM_BIAS">
10
    </oneNumber>
    <oneNumber name="SIM_SATURATION">
1
    </oneNumber>
    <oneNumber name="SIM_LIMITINGMAG">
17
    </oneNumber>
    <oneNumber name="SIM_NOISE">
10
    </oneNumber>
    <oneNumber name="SIM_SKYGLOW">
19.5
    </oneNumber>
    <oneNumber name="SIM_OAGOFFSET">
0
    </oneNumber>
    <oneNumber name="SIM_POLAR">
0
    </oneNumber>
    <oneNumber name="SIM_POLARDRIFT">
0
    </oneNumber>
    <oneNumber name="SIM_ROTATION">
0
    </oneNumber>
</setNumberVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 22:
<setSwitchVector device="CCD Simulator" name="ON_TIME_FACTOR" state="Ok" timeout="60" timestamp="2016-10-19T12:28:36">
    <oneSwitch name="1X">
On
    </oneSwitch>
    <oneSwitch name="10X">
Off
    </oneSwitch>
    <oneSwitch name="100X">
Off
    </oneSwitch>
</setSwitchVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 21:
<message device="CCD Simulator" timestamp="2016-10-19T12:28:36" message="Device configuration applied."/>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 20:
<setSwitchVector device="CCD Simulator" name="CONFIG_PROCESS" state="Ok" timeout="0" timestamp="2016-10-19T12:28:36">
    <oneSwitch name="CONFIG_LOAD">
Off
    </oneSwitch>
    <oneSwitch name="CONFIG_SAVE">
Off
    </oneSwitch>
    <oneSwitch name="CONFIG_DEFAULT">
Off
    </oneSwitch>
</setSwitchVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 19:
<message device="EQMod Mount" timestamp="2016-10-19T12:28:36" message="Loading device configuration..."/>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 18:
<setTextVector device="EQMod Mount" name="ACTIVE_DEVICES" state="Ok" timeout="60" timestamp="2016-10-19T12:28:36">
    <oneText name="ACTIVE_GPS">
GPS Simulator
    </oneText>
</setTextVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 17:
<setTextVector device="EQMod Mount" name="DEVICE_PORT" state="Ok" timeout="60" timestamp="2016-10-19T12:28:36">
    <oneText name="PORT">
/dev/mount
    </oneText>
</setTextVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 16:
<setSwitchVector device="EQMod Mount" name="TELESCOPE_BAUD_RATE" state="Ok" timeout="60" timestamp="2016-10-19T12:28:36">
    <oneSwitch name="9600">
On
    </oneSwitch>
    <oneSwitch name="19200">
Off
    </oneSwitch>
    <oneSwitch name="38400">
Off
    </oneSwitch>
    <oneSwitch name="57600">
Off
    </oneSwitch>
    <oneSwitch name="115200">
Off
    </oneSwitch>
    <oneSwitch name="230400">
Off
    </oneSwitch>
</setSwitchVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 15:
<setSwitchVector device="EQMod Mount" name="HEMISPHERE" state="Idle" timeout="0" timestamp="2016-10-19T12:28:36">
    <oneSwitch name="NORTH">
On
    </oneSwitch>
    <oneSwitch name="SOUTH">
Off
    </oneSwitch>
</setSwitchVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 14:
<message device="EQMod Mount" timestamp="2016-10-19T12:28:36" message="updateLocation: long = 13.75 lat = 51.05"/>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 13:
<setNumberVector device="EQMod Mount" name="GEOGRAPHIC_COORD" state="Ok" timeout="60" timestamp="2016-10-19T12:28:36">
    <oneNumber name="LAT">
51.049999999999997158
    </oneNumber>
    <oneNumber name="LONG">
13.75
    </oneNumber>
    <oneNumber name="ELEV">
0
    </oneNumber>
</setNumberVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 12:
<setNumberVector device="EQMod Mount" name="TELESCOPE_INFO" state="Ok" timeout="60" timestamp="2016-10-19T12:28:36">
    <oneNumber name="TELESCOPE_APERTURE">
200
    </oneNumber>
    <oneNumber name="TELESCOPE_FOCAL_LENGTH">
1000
    </oneNumber>
    <oneNumber name="GUIDER_APERTURE">
200
    </oneNumber>
    <oneNumber name="GUIDER_FOCAL_LENGTH">
1000
    </oneNumber>
</setNumberVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 11:
<setSwitchVector device="EQMod Mount" name="USEJOYSTICK" state="Ok" timeout="0" timestamp="2016-10-19T12:28:36">
    <oneSwitch name="ENABLE">
Off
    </oneSwitch>
    <oneSwitch name="DISABLE">
On
    </oneSwitch>
</setSwitchVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 10:
<setSwitchVector device="EQMod Mount" name="ALIGNMODE" state="Ok" timeout="0" timestamp="2016-10-19T12:28:36" message="Alignment mode set to N-Star">
    <oneSwitch name="NOALIGN">
Off
    </oneSwitch>
    <oneSwitch name="ALIGNNEAREST">
Off
    </oneSwitch>
    <oneSwitch name="ALIGNNSTAR">
On
    </oneSwitch>
</setSwitchVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 9:
<message device="EQMod Mount" timestamp="2016-10-19T12:28:36" message="Device configuration applied."/>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 8:
<setSwitchVector device="EQMod Mount" name="CONFIG_PROCESS" state="Ok" timeout="0" timestamp="2016-10-19T12:28:36">
    <oneSwitch name="CONFIG_LOAD">
Off
    </oneSwitch>
    <oneSwitch name="CONFIG_SAVE">
Off
    </oneSwitch>
    <oneSwitch name="CONFIG_DEFAULT">
Off
    </oneSwitch>
</setSwitchVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 7:
<setTextVector device="CCD Simulator" name="ACTIVE_DEVICES" state="Ok" timeout="60" timestamp="2016-10-19T12:28:36">
    <oneText name="ACTIVE_TELESCOPE">
EQMod Mount
    </oneText>
    <oneText name="ACTIVE_FOCUSER">
Focuser Simulator
    </oneText>
    <oneText name="ACTIVE_FILTER">
CCD Simulator
    </oneText>
</setTextVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 6:
<message device="EQMod Mount" timestamp="2016-10-19T12:28:36" message="Setting UTC Time to 2016-10-19T12:28:32, Offset 2"/>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 5:
<setTextVector device="EQMod Mount" name="TIME_UTC" state="Ok" timeout="60" timestamp="2016-10-19T12:28:36">
    <oneText name="UTC">
2016-10-19T12:28:32
    </oneText>
    <oneText name="OFFSET">
2
    </oneText>
</setTextVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 4:
<setNumberVector device="EQMod Mount" name="GEOGRAPHIC_COORD" state="Ok" timeout="60" timestamp="2016-10-19T12:28:36">
    <oneNumber name="LAT">
51.049999999999997158
    </oneNumber>
    <oneNumber name="LONG">
13.75
    </oneNumber>
    <oneNumber name="ELEV">
0
    </oneNumber>
</setNumberVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 3:
<setSwitchVector device="EQMod Mount" name="HEMISPHERE" state="Idle" timeout="0" timestamp="2016-10-19T12:28:36">
    <oneSwitch name="NORTH">
On
    </oneSwitch>
    <oneSwitch name="SOUTH">
Off
    </oneSwitch>
</setSwitchVector>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 2:
<message device="EQMod Mount" timestamp="2016-10-19T12:28:36" message="updateLocation: long = 13.75 lat = 51.05"/>

2016-10-19T12:28:36: Client 0: sending msg copy 1 nq 1:
<setNumberVector device="EQMod Mount" name="GEOGRAPHIC_COORD" state="Ok" timeout="60" timestamp="2016-10-19T12:28:36">
    <oneNumber name="LAT">
51.049999999999997158
    </oneNumber>
    <oneNumber name="LONG">
13.75
    </oneNumber>
    <oneNumber name="ELEV">
0
    </oneNumber>
</setNumberVector>

2016-10-19T12:28:37: Driver indi_eqmod_telescope: read setNumberVector EQMod Mount TIME_LST Ok
        LST='15.286359445045045291'
2016-10-19T12:28:37: Client 0: queuing <setNumberVector device='EQMod Mount' name='TIME_LST'>
2016-10-19T12:28:37: Driver indi_eqmod_telescope: read setNumberVector EQMod Mount JULIAN Ok
 JULIANDATE='2457681.0198194868863'
2016-10-19T12:28:37: Client 0: queuing <setNumberVector device='EQMod Mount' name='JULIAN'>
2016-10-19T12:28:37: Driver indi_eqmod_telescope: read setTextVector EQMod Mount TIME_UTC Ok
        UTC='2016-10-19T12:28:32'
     OFFSET='2'
2016-10-19T12:28:37: Client 0: queuing <setTextVector device='EQMod Mount' name='TIME_UTC'>
2016-10-19T12:28:37: Driver indi_eqmod_telescope: read message EQMod Mount   'dispatch_command: ":j1", 4 bytes written'
2016-10-19T12:28:37: Client 0: queuing <message device='EQMod Mount' name=''>
2016-10-19T12:28:37: Client 0: sending msg copy 1 nq 4:
<setNumberVector device="EQMod Mount" name="TIME_LST" state="Ok" timeout="0" timestamp="2016-10-19T12:28:37">
    <oneNumber name="LST">
15.286359445045045291
    </oneNumber>
</setNumberVector>

2016-10-19T12:28:37: Client 0: sending msg copy 1 nq 3:
<setNumberVector device="EQMod Mount" name="JULIAN" state="Ok" timeout="0" timestamp="2016-10-19T12:28:37">
    <oneNumber name="JULIANDATE">
2457681.0198194868863
    </oneNumber>
</setNumberVector>

2016-10-19T12:28:37: Client 0: sending msg copy 1 nq 2:
<setTextVector device="EQMod Mount" name="TIME_UTC" state="Ok" timeout="60" timestamp="2016-10-19T12:28:37">
    <oneText name="UTC">
2016-10-19T12:28:32
    </oneText>
    <oneText name="OFFSET">
2
    </oneText>
</setTextVector>

2016-10-19T12:28:37: Client 0: sending msg copy 1 nq 1:
<message device="EQMod Mount" timestamp="2016-10-19T12:28:37" message="dispatch_command: &quot;:j1&quot;, 4 bytes written"/>

2016-10-19T12:28:37: Driver indi_eqmod_telescope: read message EQMod Mount   'read_eqmod: "=000080", 8 bytes read'
2016-10-19T12:28:37: Client 0: queuing <message device='EQMod Mount' name=''>
2016-10-19T12:28:37: Driver indi_eqmod_telescope: read message EQMod Mount   'dispatch_command: ":j2", 4 bytes written'
2016-10-19T12:28:37: Client 0: queuing <message device='EQMod Mount' name=''>
2016-10-19T12:28:37: Client 0: sending msg copy 1 nq 2:
<message device="EQMod Mount" timestamp="2016-10-19T12:28:37" message="read_eqmod: &quot;=000080&quot;, 8 bytes read"/>

2016-10-19T12:28:37: Client 0: sending msg copy 1 nq 1:
<message device="EQMod Mount" timestamp="2016-10-19T12:28:37" message="dispatch_command: &quot;:j2&quot;, 4 bytes written"/>

2016-10-19T12:28:37: Driver indi_eqmod_telescope: read message EQMod Mount   'read_eqmod: "=806CA2", 8 bytes read'
2016-10-19T12:28:37: Client 0: queuing <message device='EQMod Mount' name=''>
2016-10-19T12:28:37: Driver indi_eqmod_telescope: read setNumberVector EQMod Mount ALIGNTELESCOPECOORDS Idle
 ALIGNTELESCOPE_RA='21.286359445045043515'
 ALIGNTELESCOPE_DE='90'
2016-10-19T12:28:37: Client 0: queuing <setNumberVector device='EQMod Mount' name='ALIGNTELESCOPECOORDS'>
2016-10-19T12:28:37: Driver indi_eqmod_telescope: read setNumberVector EQMod Mount EQUATORIAL_EOD_COORD Idle
         RA='21.286359445045043515'
        DEC='90'
2016-10-19T12:28:37: Client 0: queuing <setNumberVector device='EQMod Mount' name='EQUATORIAL_EOD_COORD'>
2016-10-19T12:28:37: Driver indi_simulator_ccd: queuing snooped <setNumberVector device='EQMod Mount' name='EQUATORIAL_EOD_COORD'>
2016-10-19T12:28:37: Driver indi_eqmod_telescope: read setNumberVector EQMod Mount HORIZONTAL_COORD Idle
        ALT='51.049999999999997158'
         AZ='360'
2016-10-19T12:28:37: Client 0: queuing <setNumberVector device='EQMod Mount' name='HORIZONTAL_COORD'>
2016-10-19T12:28:37: Driver indi_eqmod_telescope: read setSwitchVector EQMod Mount TELESCOPE_PIER_SIDE Idle
  PIER_EAST='On'
  PIER_WEST='Off'
2016-10-19T12:28:37: Client 0: queuing <setSwitchVector device='EQMod Mount' name='TELESCOPE_PIER_SIDE'>
2016-10-19T12:28:37: Driver indi_eqmod_telescope: read setNumberVector EQMod Mount CURRENTSTEPPERS Idle
 RAStepsCurrent='8388608'
 DEStepsCurrent='10644608'
2016-10-19T12:28:37: Client 0: queuing <setNumberVector device='EQMod Mount' name='CURRENTSTEPPERS'>
2016-10-19T12:28:37: Driver indi_eqmod_telescope: read message EQMod Mount   'dispatch_command: ":f1", 4 bytes written'
2016-10-19T12:28:37: Client 0: queuing <message device='EQMod Mount' name=''>
2016-10-19T12:28:37: Client 0: sending msg copy 1 nq 7:
<message device="EQMod Mount" timestamp="2016-10-19T12:28:37" message="read_eqmod: &quot;=806CA2&quot;, 8 bytes read"/>

2016-10-19T12:28:37: Driver indi_simulator_ccd: sending msg copy 2 nq 1:
<setNumberVector device="EQMod Mount" name="EQUATORIAL_EOD_COORD" state="Idle" timeout="60" timestamp="2016-10-19T12:28:37">
    <oneNumber name="RA">
21.286359445045043515
    </oneNumber>
    <oneNumber name="DEC">
90
    </oneNumber>
</setNumberVector>

2016-10-19T12:28:37: Driver indi_eqmod_telescope: read message EQMod Mount   'read_eqmod: "=101", 5 bytes read'
2016-10-19T12:28:37: Client 0: queuing <message device='EQMod Mount' name=''>
2016-10-19T12:28:37: Driver indi_eqmod_telescope: read message EQMod Mount   'dispatch_command: ":f2", 4 bytes written'
2016-10-19T12:28:37: Client 0: queuing <message device='EQMod Mount' name=''>
2016-10-19T12:28:37: Driver indi_eqmod_telescope: read message EQMod Mount   'read_eqmod: "=101", 5 bytes read'
2016-10-19T12:28:37: Client 0: queuing <message device='EQMod Mount' name=''>
2016-10-19T12:28:37: Driver indi_eqmod_telescope: read setLightVector EQMod Mount RASTATUS Idle
 RAInitialized='Ok'
  RARunning='Busy'
     RAGoto='Busy'
  RAForward='Ok'
 RAHighspeed='Busy'
2016-10-19T12:28:37: Client 0: queuing <setLightVector device='EQMod Mount' name='RASTATUS'>
2016-10-19T12:28:37: Driver indi_eqmod_telescope: read setLightVector EQMod Mount DESTATUS Idle
 DEInitialized='Ok'
  DERunning='Busy'
     DEGoto='Busy'
  DEForward='Ok'
 DEHighspeed='Busy'
2016-10-19T12:28:37: Client 0: queuing <setLightVector device='EQMod Mount' name='DESTATUS'>
2016-10-19T12:28:37: Driver indi_eqmod_telescope: read setNumberVector EQMod Mount PERIODS Idle
   RAPERIOD='0'
   DEPERIOD='0'
2016-10-19T12:28:37: Client 0: queuing <setNumberVector device='EQMod Mount' name='PERIODS'>
2016-10-19T12:28:37: Client 0: sending msg copy 1 nq 12:
<setNumberVector device="EQMod Mount" name="ALIGNTELESCOPECOORDS" state="Idle" timeout="0" timestamp="2016-10-19T12:28:37">
    <oneNumber name="ALIGNTELESCOPE_RA">
21.286359445045043515
    </oneNumber>
    <oneNumber name="ALIGNTELESCOPE_DE">
90
    </oneNumber>
</setNumberVector>

2016-10-19T12:28:37: Client 0: sending msg copy 1 nq 11:
<setNumberVector device="EQMod Mount" name="EQUATORIAL_EOD_COORD" state="Idle" timeout="60" timestamp="2016-10-19T12:28:37">
    <oneNumber name="RA">
21.286359445045043515
    </oneNumber>
    <oneNumber name="DEC">
90
    </oneNumber>
</setNumberVector>

2016-10-19T12:28:37: Client 0: sending msg copy 1 nq 10:
<setNumberVector device="EQMod Mount" name="HORIZONTAL_COORD" state="Idle" timeout="0" timestamp="2016-10-19T12:28:37">
    <oneNumber name="ALT">
51.049999999999997158
    </oneNumber>
    <oneNumber name="AZ">
360
    </oneNumber>
</setNumberVector>

2016-10-19T12:28:37: Client 0: sending msg copy 1 nq 9:
<setSwitchVector device="EQMod Mount" name="TELESCOPE_PIER_SIDE" state="Idle" timeout="0" timestamp="2016-10-19T12:28:37">
    <oneSwitch name="PIER_EAST">
On
    </oneSwitch>
    <oneSwitch name="PIER_WEST">
Off
    </oneSwitch>
</setSwitchVector>

2016-10-19T12:28:37: Client 0: sending msg copy 1 nq 8:
<setNumberVector device="EQMod Mount" name="CURRENTSTEPPERS" state="Idle" timeout="0" timestamp="2016-10-19T12:28:37">
    <oneNumber name="RAStepsCurrent">
8388608
    </oneNumber>
    <oneNumber name="DEStepsCurrent">
10644608
    </oneNumber>
</setNumberVector>

2016-10-19T12:28:37: Client 0: sending msg copy 1 nq 7:
<message device="EQMod Mount" timestamp="2016-10-19T12:28:37" message="dispatch_command: &quot;:f1&quot;, 4 bytes written"/>

2016-10-19T12:28:37: Client 0: sending msg copy 1 nq 6:
<message device="EQMod Mount" timestamp="2016-10-19T12:28:37" message="read_eqmod: &quot;=101&quot;, 5 bytes read"/>

2016-10-19T12:28:37: Client 0: sending msg copy 1 nq 5:
<message device="EQMod Mount" timestamp="2016-10-19T12:28:37" message="dispatch_command: &quot;:f2&quot;, 4 bytes written"/>

2016-10-19T12:28:37: Client 0: sending msg copy 1 nq 4:
<message device="EQMod Mount" timestamp="2016-10-19T12:28:37" message="read_eqmod: &quot;=101&quot;, 5 bytes read"/>

2016-10-19T12:28:37: Client 0: sending msg copy 1 nq 3:
<setLightVector device="EQMod Mount" name="RASTATUS" state="Idle" timestamp="2016-10-19T12:28:37">
    <oneLight name="RAInitialized">
Ok
    </oneLight>
    <oneLight name="RARunning">
Busy
    </oneLight>
    <oneLight name="RAGoto">
Busy
    </oneLight>
    <oneLight name="RAForward">
Ok
    </oneLight>
    <oneLight name="RAHighspeed">
Busy
    </oneLight>
</setLightVector>

2016-10-19T12:28:37: Client 0: sending msg copy 1 nq 2:
<setLightVector device="EQMod Mount" name="DESTATUS" state="Idle" timestamp="2016-10-19T12:28:37">
    <oneLight name="DEInitialized">
Ok
    </oneLight>
    <oneLight name="DERunning">
Busy
    </oneLight>
    <oneLight name="DEGoto">
Busy
    </oneLight>
    <oneLight name="DEForward">
Ok
    </oneLight>
    <oneLight name="DEHighspeed">
Busy
    </oneLight>
</setLightVector>

2016-10-19T12:28:37: Client 0: sending msg copy 1 nq 1:
<setNumberVector device="EQMod Mount" name="PERIODS" state="Idle" timeout="0" timestamp="2016-10-19T12:28:37">
    <oneNumber name="RAPERIOD">
0
    </oneNumber>
    <oneNumber name="DEPERIOD">
0
    </oneNumber>
</setNumberVector>

2016-10-19T12:28:38: Driver indi_eqmod_telescope: read setNumberVector EQMod Mount TIME_LST Ok
        LST='15.286652348540377133'
2016-10-19T12:28:38: Client 0: queuing <setNumberVector device='EQMod Mount' name='TIME_LST'>
2016-10-19T12:28:38: Driver indi_eqmod_telescope: read setNumberVector EQMod Mount JULIAN Ok
 JULIANDATE='2457681.0198316578753'
2016-10-19T12:28:38: Client 0: queuing <setNumberVector device='EQMod Mount' name='JULIAN'>
2016-10-19T12:28:38: Driver indi_eqmod_telescope: read setTextVector EQMod Mount TIME_UTC Ok
        UTC='2016-10-19T12:28:33'
     OFFSET='2'
2016-10-19T12:28:38: Client 0: queuing <setTextVector device='EQMod Mount' name='TIME_UTC'>
2016-10-19T12:28:38: Driver indi_eqmod_telescope: read message EQMod Mount   'dispatch_command: ":j1", 4 bytes written'
2016-10-19T12:28:38: Client 0: queuing <message device='EQMod Mount' name=''>
2016-10-19T12:28:38: Client 0: sending msg copy 1 nq 4:
<setNumberVector device="EQMod Mount" name="TIME_LST" state="Ok" timeout="0" timestamp="2016-10-19T12:28:38">
    <oneNumber name="LST">
15.286652348540377133
    </oneNumber>
</setNumberVector>

2016-10-19T12:28:38: Client 0: sending msg copy 1 nq 3:
<setNumberVector device="EQMod Mount" name="JULIAN" state="Ok" timeout="0" timestamp="2016-10-19T12:28:38">
    <oneNumber name="JULIANDATE">
2457681.0198316578753
    </oneNumber>
</setNumberVector>

2016-10-19T12:28:38: Client 0: sending msg copy 1 nq 2:
<setTextVector device="EQMod Mount" name="TIME_UTC" state="Ok" timeout="60" timestamp="2016-10-19T12:28:38">
    <oneText name="UTC">
2016-10-19T12:28:33
    </oneText>
    <oneText name="OFFSET">
2
    </oneText>
</setTextVector>

2016-10-19T12:28:38: Client 0: sending msg copy 1 nq 1:
<message device="EQMod Mount" timestamp="2016-10-19T12:28:38" message="dispatch_command: &quot;:j1&quot;, 4 bytes written"/>

2016-10-19T12:28:38: Driver indi_eqmod_telescope: read message EQMod Mount   'read_eqmod: "=000080", 8 bytes read'
2016-10-19T12:28:38: Client 0: queuing <message device='EQMod Mount' name=''>
2016-10-19T12:28:38: Driver indi_eqmod_telescope: read message EQMod Mount   'dispatch_command: ":j2", 4 bytes written'
2016-10-19T12:28:38: Client 0: queuing <message device='EQMod Mount' name=''>
2016-10-19T12:28:38: Client 0: sending msg copy 1 nq 2:
<message device="EQMod Mount" timestamp="2016-10-19T12:28:38" message="read_eqmod: &quot;=000080&quot;, 8 bytes read"/>

2016-10-19T12:28:38: Client 0: sending msg copy 1 nq 1:
<message device="EQMod Mount" timestamp="2016-10-19T12:28:38" message="dispatch_command: &quot;:j2&quot;, 4 bytes written"/>

2016-10-19T12:28:38: Driver indi_eqmod_telescope: read message EQMod Mount   'read_eqmod: "=806CA2", 8 bytes read'
2016-10-19T12:28:38: Client 0: queuing <message device='EQMod Mount' name=''>
2016-10-19T12:28:38: Driver indi_eqmod_telescope: read setNumberVector EQMod Mount ALIGNTELESCOPECOORDS Idle
 ALIGNTELESCOPE_RA='21.28665234854037891'
 ALIGNTELESCOPE_DE='90'
2016-10-19T12:28:38: Client 0: queuing <setNumberVector device='EQMod Mount' name='ALIGNTELESCOPECOORDS'>
2016-10-19T12:28:38: Driver indi_eqmod_telescope: read setNumberVector EQMod Mount EQUATORIAL_EOD_COORD Idle
         RA='21.28665234854037891'
        DEC='90'
2016-10-19T12:28:38: Client 0: queuing <setNumberVector device='EQMod Mount' name='EQUATORIAL_EOD_COORD'>
2016-10-19T12:28:38: Driver indi_simulator_ccd: queuing snooped <setNumberVector device='EQMod Mount' name='EQUATORIAL_EOD_COORD'>
2016-10-19T12:28:38: Driver indi_eqmod_telescope: read setNumberVector EQMod Mount HORIZONTAL_COORD Idle
        ALT='51.049999999999997158'
         AZ='360'
2016-10-19T12:28:38: Client 0: queuing <setNumberVector device='EQMod Mount' name='HORIZONTAL_COORD'>
2016-10-19T12:28:38: Driver indi_eqmod_telescope: read setNumberVector EQMod Mount CURRENTSTEPPERS Idle
 RAStepsCurrent='8388608'
 DEStepsCurrent='10644608'
2016-10-19T12:28:38: Client 0: queuing <setNumberVector device='EQMod Mount' name='CURRENTSTEPPERS'>
2016-10-19T12:28:38: Driver indi_eqmod_telescope: read message EQMod Mount   'dispatch_command: ":f1", 4 bytes written'
2016-10-19T12:28:38: Client 0: queuing <message device='EQMod Mount' name=''>
2016-10-19T12:28:38: Client 0: sending msg copy 1 nq 6:
<message device="EQMod Mount" timestamp="2016-10-19T12:28:38" message="read_eqmod: &quot;=806CA2&quot;, 8 bytes read"/>

2016-10-19T12:28:38: Driver indi_simulator_ccd: sending msg copy 2 nq 1:
<setNumberVector device="EQMod Mount" name="EQUATORIAL_EOD_COORD" state="Idle" timeout="60" timestamp="2016-10-19T12:28:38">
    <oneNumber name="RA">
21.28665234854037891
    </oneNumber>
    <oneNumber name="DEC">
90
    </oneNumber>
</setNumberVector>

2016-10-19T12:28:38: Driver indi_eqmod_telescope: read message EQMod Mount   'read_eqmod: "=101", 5 bytes read'
2016-10-19T12:28:38: Client 0: queuing <message device='EQMod Mount' name=''>
2016-10-19T12:28:38: Driver indi_eqmod_telescope: read message EQMod Mount   'dispatch_command: ":f2", 4 bytes written'
2016-10-19T12:28:38: Client 0: queuing <message device='EQMod Mount' name=''>
2016-10-19T12:28:38: Driver indi_eqmod_telescope: read message EQMod Mount   'read_eqmod: "=101", 5 bytes read'
2016-10-19T12:28:38: Client 0: queuing <message device='EQMod Mount' name=''>
2016-10-19T12:28:38: Driver indi_eqmod_telescope: read setLightVector EQMod Mount RASTATUS Idle
 RAInitialized='Ok'
  RARunning='Busy'
     RAGoto='Busy'
  RAForward='Ok'
 RAHighspeed='Busy'
2016-10-19T12:28:38: Client 0: queuing <setLightVector device='EQMod Mount' name='RASTATUS'>
2016-10-19T12:28:38: Driver indi_eqmod_telescope: read setLightVector EQMod Mount DESTATUS Idle
 DEInitialized='Ok'
  DERunning='Busy'
     DEGoto='Busy'
  DEForward='Ok'
 DEHighspeed='Busy'
2016-10-19T12:28:38: Client 0: queuing <setLightVector device='EQMod Mount' name='DESTATUS'>
2016-10-19T12:28:38: Driver indi_eqmod_telescope: read setNumberVector EQMod Mount PERIODS Idle
   RAPERIOD='0'
   DEPERIOD='0'
2016-10-19T12:28:38: Client 0: queuing <setNumberVector device='EQMod Mount' name='PERIODS'>
2016-10-19T12:28:38: Client 0: sending msg copy 1 nq 11:
<setNumberVector device="EQMod Mount" name="ALIGNTELESCOPECOORDS" state="Idle" timeout="0" timestamp="2016-10-19T12:28:38">
    <oneNumber name="ALIGNTELESCOPE_RA">
21.28665234854037891
    </oneNumber>
    <oneNumber name="ALIGNTELESCOPE_DE">
90
    </oneNumber>
</setNumberVector>

2016-10-19T12:28:38: Client 0: sending msg copy 1 nq 10:
<setNumberVector device="EQMod Mount" name="EQUATORIAL_EOD_COORD" state="Idle" timeout="60" timestamp="2016-10-19T12:28:38">
    <oneNumber name="RA">
21.28665234854037891
    </oneNumber>
    <oneNumber name="DEC">
90
    </oneNumber>
</setNumberVector>

2016-10-19T12:28:38: Client 0: sending msg copy 1 nq 9:
<setNumberVector device="EQMod Mount" name="HORIZONTAL_COORD" state="Idle" timeout="0" timestamp="2016-10-19T12:28:38">
    <oneNumber name="ALT">
51.049999999999997158
    </oneNumber>
    <oneNumber name="AZ">
360
    </oneNumber>
</setNumberVector>

2016-10-19T12:28:38: Client 0: sending msg copy 1 nq 8:
<setNumberVector device="EQMod Mount" name="CURRENTSTEPPERS" state="Idle" timeout="0" timestamp="2016-10-19T12:28:38">
    <oneNumber name="RAStepsCurrent">
8388608
    </oneNumber>
    <oneNumber name="DEStepsCurrent">
10644608
    </oneNumber>
</setNumberVector>

2016-10-19T12:28:38: Client 0: sending msg copy 1 nq 7:
<message device="EQMod Mount" timestamp="2016-10-19T12:28:38" message="dispatch_command: &quot;:f1&quot;, 4 bytes written"/>

2016-10-19T12:28:38: Client 0: sending msg copy 1 nq 6:
<message device="EQMod Mount" timestamp="2016-10-19T12:28:38" message="read_eqmod: &quot;=101&quot;, 5 bytes read"/>

2016-10-19T12:28:38: Client 0: sending msg copy 1 nq 5:
<message device="EQMod Mount" timestamp="2016-10-19T12:28:38" message="dispatch_command: &quot;:f2&quot;, 4 bytes written"/>

2016-10-19T12:28:38: Client 0: sending msg copy 1 nq 4:
<message device="EQMod Mount" timestamp="2016-10-19T12:28:38" message="read_eqmod: &quot;=101&quot;, 5 bytes read"/>

2016-10-19T12:28:38: Client 0: sending msg copy 1 nq 3:
<setLightVector device="EQMod Mount" name="RASTATUS" state="Idle" timestamp="2016-10-19T12:28:38">
    <oneLight name="RAInitialized">
Ok
    </oneLight>
    <oneLight name="RARunning">
Busy
    </oneLight>
    <oneLight name="RAGoto">
Busy
    </oneLight>
    <oneLight name="RAForward">
Ok
    </oneLight>
    <oneLight name="RAHighspeed">
Busy
    </oneLight>
</setLightVector>

2016-10-19T12:28:38: Client 0: sending msg copy 1 nq 2:
<setLightVector device="EQMod Mount" name="DESTATUS" state="Idle" timestamp="2016-10-19T12:28:38">
    <oneLight name="DEInitialized">
Ok
    </oneLight>
    <oneLight name="DERunning">
Busy
    </oneLight>
    <oneLight name="DEGoto">
Busy
    </oneLight>
    <oneLight name="DEForward">
Ok
    </oneLight>
    <oneLight name="DEHighspeed">
Busy
    </oneLight>
</setLightVector>

2016-10-19T12:28:38: Client 0: sending msg copy 1 nq 1:
<setNumberVector device="EQMod Mount" name="PERIODS" state="Idle" timeout="0" timestamp="2016-10-19T12:28:38">
    <oneNumber name="RAPERIOD">
0
    </oneNumber>
    <oneNumber name="DEPERIOD">
0
    </oneNumber>
</setNumberVector>

2016-10-19T12:28:39: Driver indi_eqmod_telescope: read setNumberVector EQMod Mount TIME_LST Ok
        LST='15.286945050311238958'
2016-10-19T12:28:39: Client 0: queuing <setNumberVector device='EQMod Mount' name='TIME_LST'>
2016-10-19T12:28:39: Driver indi_eqmod_telescope: read setNumberVector EQMod Mount JULIAN Ok
 JULIANDATE='2457681.0198438204825'
2016-10-19T12:28:39: Client 0: queuing <setNumberVector device='EQMod Mount' name='JULIAN'>
2016-10-19T12:28:39: Driver indi_eqmod_telescope: read setTextVector EQMod Mount TIME_UTC Ok
        UTC='2016-10-19T12:28:34'
     OFFSET='2'
2016-10-19T12:28:39: Client 0: queuing <setTextVector device='EQMod Mount' name='TIME_UTC'>
2016-10-19T12:28:39: Driver indi_eqmod_telescope: read message EQMod Mount   'dispatch_command: ":j1", 4 bytes written'
2016-10-19T12:28:39: Client 0: queuing <message device='EQMod Mount' name=''>
2016-10-19T12:28:39: Client 0: sending msg copy 1 nq 4:
<setNumberVector device="EQMod Mount" name="TIME_LST" state="Ok" timeout="0" timestamp="2016-10-19T12:28:39">
    <oneNumber name="LST">
15.286945050311238958
    </oneNumber>
</setNumberVector>

2016-10-19T12:28:39: Client 0: sending msg copy 1 nq 3:
<setNumberVector device="EQMod Mount" name="JULIAN" state="Ok" timeout="0" timestamp="2016-10-19T12:28:39">
    <oneNumber name="JULIANDATE">
2457681.0198438204825
    </oneNumber>
</setNumberVector>

2016-10-19T12:28:39: Client 0: sending msg copy 1 nq 2:
<setTextVector device="EQMod Mount" name="TIME_UTC" state="Ok" timeout="60" timestamp="2016-10-19T12:28:39">
    <oneText name="UTC">
2016-10-19T12:28:34
    </oneText>
    <oneText name="OFFSET">
2
    </oneText>
</setTextVector>

2016-10-19T12:28:39: Client 0: sending msg copy 1 nq 1:
<message device="EQMod Mount" timestamp="2016-10-19T12:28:39" message="dispatch_command: &quot;:j1&quot;, 4 bytes written"/>

2016-10-19T12:28:39: Driver indi_eqmod_telescope: read message EQMod Mount   'read_eqmod: "=000080", 8 bytes read'
2016-10-19T12:28:39: Client 0: queuing <message device='EQMod Mount' name=''>
2016-10-19T12:28:39: Driver indi_eqmod_telescope: read message EQMod Mount   'dispatch_command: ":j2", 4 bytes written'
2016-10-19T12:28:39: Client 0: queuing <message device='EQMod Mount' name=''>
2016-10-19T12:28:39: Client 0: sending msg copy 1 nq 2:
<message device="EQMod Mount" timestamp="2016-10-19T12:28:39" message="read_eqmod: &quot;=000080&quot;, 8 bytes read"/>

2016-10-19T12:28:39: Client 0: sending msg copy 1 nq 1:
<message device="EQMod Mount" timestamp="2016-10-19T12:28:39" message="dispatch_command: &quot;:j2&quot;, 4 bytes written"/>

2016-10-19T12:28:39: Driver indi_eqmod_telescope: read message EQMod Mount   'read_eqmod: "=806CA2", 8 bytes read'
2016-10-19T12:28:39: Client 0: queuing <message device='EQMod Mount' name=''>
2016-10-19T12:28:39: Driver indi_eqmod_telescope: read setNumberVector EQMod Mount ALIGNTELESCOPECOORDS Idle
 ALIGNTELESCOPE_RA='21.286945050311238958'
 ALIGNTELESCOPE_DE='90'
2016-10-19T12:28:39: Client 0: queuing <setNumberVector device='EQMod Mount' name='ALIGNTELESCOPECOORDS'>
2016-10-19T12:28:39: Driver indi_eqmod_telescope: read setNumberVector EQMod Mount EQUATORIAL_EOD_COORD Idle
         RA='21.286945050311238958'
        DEC='90'
2016-10-19T12:28:39: Client 0: queuing <setNumberVector device='EQMod Mount' name='EQUATORIAL_EOD_COORD'>
2016-10-19T12:28:39: Driver indi_simulator_ccd: queuing snooped <setNumberVector device='EQMod Mount' name='EQUATORIAL_EOD_COORD'>
2016-10-19T12:28:39: Driver indi_eqmod_telescope: read setNumberVector EQMod Mount HORIZONTAL_COORD Idle
        ALT='51.049999999999997158'
         AZ='360'
2016-10-19T12:28:39: Client 0: queuing <setNumberVector device='EQMod Mount' name='HORIZONTAL_COORD'>
2016-10-19T12:28:39: Driver indi_eqmod_telescope: read setNumberVector EQMod Mount CURRENTSTEPPERS Idle
 RAStepsCurrent='8388608'
 DEStepsCurrent='10644608'
2016-10-19T12:28:39: Client 0: queuing <setNumberVector device='EQMod Mount' name='CURRENTSTEPPERS'>
2016-10-19T12:28:39: Driver indi_eqmod_telescope: read message EQMod Mount   'dispatch_command: ":f1", 4 bytes written'
2016-10-19T12:28:39: Client 0: queuing <message device='EQMod Mount' name=''>
2016-10-19T12:28:39: Client 0: sending msg copy 1 nq 6:
<message device="EQMod Mount" timestamp="2016-10-19T12:28:39" message="read_eqmod: &quot;=806CA2&quot;, 8 bytes read"/>

2016-10-19T12:28:39: Driver indi_simulator_ccd: sending msg copy 2 nq 1:
<setNumberVector device="EQMod Mount" name="EQUATORIAL_EOD_COORD" state="Idle" timeout="60" timestamp="2016-10-19T12:28:39">
    <oneNumber name="RA">
21.286945050311238958
    </oneNumber>
    <oneNumber name="DEC">
90
    </oneNumber>
</setNumberVector>

2016-10-19T12:28:39: Client 0: sending msg copy 1 nq 5:
<setNumberVector device="EQMod Mount" name="ALIGNTELESCOPECOORDS" state="Idle" timeout="0" timestamp="2016-10-19T12:28:39">
    <oneNumber name="ALIGNTELESCOPE_RA">
21.286945050311238958
    </oneNumber>
    <oneNumber name="ALIGNTELESCOPE_DE">
90
    </oneNumber>
</setNumberVector>

2016-10-19T12:28:39: Client 0: sending msg copy 1 nq 4:
<setNumberVector device="EQMod Mount" name="EQUATORIAL_EOD_COORD" state="Idle" timeout="60" timestamp="2016-10-19T12:28:39">
    <oneNumber name="RA">
21.286945050311238958
    </oneNumber>
    <oneNumber name="DEC">
90
    </oneNumber>
</setNumberVector>

2016-10-19T12:28:39: Client 0: sending msg copy 1 nq 3:
<setNumberVector device="EQMod Mount" name="HORIZONTAL_COORD" state="Idle" timeout="0" timestamp="2016-10-19T12:28:39">
    <oneNumber name="ALT">
51.049999999999997158
    </oneNumber>
    <oneNumber name="AZ">
360
    </oneNumber>
</setNumberVector>

2016-10-19T12:28:39: Client 0: sending msg copy 1 nq 2:
<setNumberVector device="EQMod Mount" name="CURRENTSTEPPERS" state="Idle" timeout="0" timestamp="2016-10-19T12:28:39">
    <oneNumber name="RAStepsCurrent">
8388608
    </oneNumber>
    <oneNumber name="DEStepsCurrent">
10644608
    </oneNumber>
</setNumberVector>

2016-10-19T12:28:39: Client 0: sending msg copy 1 nq 1:
<message device="EQMod Mount" timestamp="2016-10-19T12:28:39" message="dispatch_command: &quot;:f1&quot;, 4 bytes written"/>

2016-10-19T12:28:54: Driver indi_eqmod_telescope: read message EQMod Mount   'Error:  -> tty read failed, check connection: Timeout error'
2016-10-19T12:28:54: Client 0: queuing <message device='EQMod Mount' name=''>
2016-10-19T12:28:54: Driver indi_eqmod_telescope: read message EQMod Mount   'dispatch_command: ":f1", 4 bytes written'
2016-10-19T12:28:54: Client 0: queuing <message device='EQMod Mount' name=''>
2016-10-19T12:28:54: Client 0: sending msg copy 1 nq 2:
<message device="EQMod Mount" timestamp="2016-10-19T12:28:54" message="Error:  -&gt; tty read failed, check connection: Timeout error"/>

2016-10-19T12:28:54: Client 0: sending msg copy 1 nq 1:
<message device="EQMod Mount" timestamp="2016-10-19T12:28:54" message="dispatch_command: &quot;:f1&quot;, 4 bytes written"/>

2016-10-19T12:28:54: Driver indi_eqmod_telescope: read message EQMod Mount   'read_eqmod: "=101", 5 bytes read'
2016-10-19T12:28:54: Client 0: queuing <message device='EQMod Mount' name=''>
2016-10-19T12:28:54: Driver indi_eqmod_telescope: read message EQMod Mount   'dispatch_command: ":K1", 4 bytes written'
2016-10-19T12:28:54: Client 0: queuing <message device='EQMod Mount' name=''>
2016-10-19T12:28:54: Client 0: sending msg copy 1 nq 2:
<message device="EQMod Mount" timestamp="2016-10-19T12:28:54" message="read_eqmod: &quot;=101&quot;, 5 bytes read"/>

2016-10-19T12:28:54: Client 0: sending msg copy 1 nq 1:
<message device="EQMod Mount" timestamp="2016-10-19T12:28:54" message="dispatch_command: &quot;:K1&quot;, 4 bytes written"/>

2016-10-19T12:28:54: Driver indi_eqmod_telescope: read message EQMod Mount   'read_eqmod: "=", 2 bytes read'
2016-10-19T12:28:54: Client 0: queuing <message device='EQMod Mount' name=''>
2016-10-19T12:28:54: Driver indi_eqmod_telescope: read message EQMod Mount   'dispatch_command: ":f2", 4 bytes written'
2016-10-19T12:28:54: Client 0: queuing <message device='EQMod Mount' name=''>
2016-10-19T12:28:54: Client 0: sending msg copy 1 nq 2:
<message device="EQMod Mount" timestamp="2016-10-19T12:28:54" message="read_eqmod: &quot;=&quot;, 2 bytes read"/>

2016-10-19T12:28:54: Client 0: sending msg copy 1 nq 1:
<message device="EQMod Mount" timestamp="2016-10-19T12:28:54" message="dispatch_command: &quot;:f2&quot;, 4 bytes written"/>

2016-10-19T12:28:54: Driver indi_eqmod_telescope: read message EQMod Mount   'read_eqmod: "=101", 5 bytes read'
2016-10-19T12:28:54: Client 0: queuing <message device='EQMod Mount' name=''>
2016-10-19T12:28:54: Driver indi_eqmod_telescope: read message EQMod Mount   'dispatch_command: ":K2", 4 bytes written'
2016-10-19T12:28:54: Client 0: queuing <message device='EQMod Mount' name=''>
2016-10-19T12:28:54: Client 0: sending msg copy 1 nq 2:
<message device="EQMod Mount" timestamp="2016-10-19T12:28:54" message="read_eqmod: &quot;=101&quot;, 5 bytes read"/>

2016-10-19T12:28:54: Client 0: sending msg copy 1 nq 1:
<message device="EQMod Mount" timestamp="2016-10-19T12:28:54" message="dispatch_command: &quot;:K2&quot;, 4 bytes written"/>

2016-10-19T12:28:54: Driver indi_eqmod_telescope: read message EQMod Mount   'read_eqmod: "=", 2 bytes read'
2016-10-19T12:28:54: Client 0: queuing <message device='EQMod Mount' name=''>
2016-10-19T12:28:54: Client 0: sending msg copy 1 nq 1:
<message device="EQMod Mount" timestamp="2016-10-19T12:28:54" message="read_eqmod: &quot;=&quot;, 2 bytes read"/>

2016-10-19T12:28:54: Driver indi_eqmod_telescope: read message EQMod Mount   'Disconnected from EQMod Mount.'
2016-10-19T12:28:54: Client 0: queuing <message device='EQMod Mount' name=''>
2016-10-19T12:28:54: Driver indi_eqmod_telescope: read setNumberVector EQMod Mount EQUATORIAL_EOD_COORD Alert
         RA='21.286945050311238958'
        DEC='90'
2016-10-19T12:28:54: Client 0: queuing <setNumberVector device='EQMod Mount' name='EQUATORIAL_EOD_COORD'>
2016-10-19T12:28:54: Driver indi_simulator_ccd: queuing snooped <setNumberVector device='EQMod Mount' name='EQUATORIAL_EOD_COORD'>
2016-10-19T12:28:54: Client 0: sending msg copy 1 nq 2:
<message device="EQMod Mount" timestamp="2016-10-19T12:28:54" message="Disconnected from EQMod Mount."/>

2016-10-19T12:28:54: Driver indi_simulator_ccd: sending msg copy 2 nq 1:
<setNumberVector device="EQMod Mount" name="EQUATORIAL_EOD_COORD" state="Alert" timeout="60" timestamp="2016-10-19T12:28:54">
    <oneNumber name="RA">
21.286945050311238958
    </oneNumber>
    <oneNumber name="DEC">
90
    </oneNumber>
</setNumberVector>

2016-10-19T12:28:54: Client 0: sending msg copy 1 nq 1:
<setNumberVector device="EQMod Mount" name="EQUATORIAL_EOD_COORD" state="Alert" timeout="60" timestamp="2016-10-19T12:28:54">
    <oneNumber name="RA">
21.286945050311238958
    </oneNumber>
    <oneNumber name="DEC">
90
    </oneNumber>
</setNumberVector>

2016-10-19T12:28:55: Driver indi_eqmod_telescope: read setNumberVector EQMod Mount TIME_LST Ok
        LST='15.291496916465115774'
2016-10-19T12:28:55: Client 0: queuing <setNumberVector device='EQMod Mount' name='TIME_LST'>
2016-10-19T12:28:55: Driver indi_eqmod_telescope: read setNumberVector EQMod Mount JULIAN Ok
 JULIANDATE='2457681.0200329637155'
2016-10-19T12:28:55: Client 0: queuing <setNumberVector device='EQMod Mount' name='JULIAN'>
2016-10-19T12:28:55: Driver indi_eqmod_telescope: read setTextVector EQMod Mount TIME_UTC Ok
        UTC='2016-10-19T12:28:50'
     OFFSET='2'
2016-10-19T12:28:55: Client 0: queuing <setTextVector device='EQMod Mount' name='TIME_UTC'>
2016-10-19T12:28:55: Driver indi_eqmod_telescope: read message EQMod Mount   'Error:  -> tty write failed, check connection: Error: unrecognized error code'
2016-10-19T12:28:55: Client 0: queuing <message device='EQMod Mount' name=''>
2016-10-19T12:28:55: Driver indi_eqmod_telescope: read message EQMod Mount   'Disconnected from EQMod Mount.'
2016-10-19T12:28:55: Client 0: queuing <message device='EQMod Mount' name=''>
2016-10-19T12:28:55: Driver indi_eqmod_telescope: read setNumberVector EQMod Mount EQUATORIAL_EOD_COORD Alert
         RA='21.286945050311238958'
        DEC='90'
2016-10-19T12:28:55: Client 0: queuing <setNumberVector device='EQMod Mount' name='EQUATORIAL_EOD_COORD'>
2016-10-19T12:28:55: Driver indi_simulator_ccd: queuing snooped <setNumberVector device='EQMod Mount' name='EQUATORIAL_EOD_COORD'>
2016-10-19T12:28:55: Client 0: sending msg copy 1 nq 6:
<setNumberVector device="EQMod Mount" name="TIME_LST" state="Ok" timeout="0" timestamp="2016-10-19T12:28:55">
    <oneNumber name="LST">
15.291496916465115774
    </oneNumber>
</setNumberVector>

2016-10-19T12:28:55: Driver indi_simulator_ccd: sending msg copy 2 nq 1:
<setNumberVector device="EQMod Mount" name="EQUATORIAL_EOD_COORD" state="Alert" timeout="60" timestamp="2016-10-19T12:28:55">
    <oneNumber name="RA">
21.286945050311238958
    </oneNumber>
    <oneNumber name="DEC">
90
    </oneNumber>
</setNumberVector>

2016-10-19T12:28:55: Client 0: sending msg copy 1 nq 5:
<setNumberVector device="EQMod Mount" name="JULIAN" state="Ok" timeout="0" timestamp="2016-10-19T12:28:55">
    <oneNumber name="JULIANDATE">
2457681.0200329637155
    </oneNumber>
</setNumberVector>

2016-10-19T12:28:55: Client 0: sending msg copy 1 nq 4:
<setTextVector device="EQMod Mount" name="TIME_UTC" state="Ok" timeout="60" timestamp="2016-10-19T12:28:55">
    <oneText name="UTC">
2016-10-19T12:28:50
    </oneText>
    <oneText name="OFFSET">
2
    </oneText>
</setTextVector>

2016-10-19T12:28:55: Client 0: sending msg copy 1 nq 3:
<message device="EQMod Mount" timestamp="2016-10-19T12:28:55" message="Error:  -&gt; tty write failed, check connection: Error: unrecognized error code"/>

2016-10-19T12:28:55: Client 0: sending msg copy 1 nq 2:
<message device="EQMod Mount" timestamp="2016-10-19T12:28:55" message="Disconnected from EQMod Mount."/>

2016-10-19T12:28:55: Client 0: sending msg copy 1 nq 1:
<setNumberVector device="EQMod Mount" name="EQUATORIAL_EOD_COORD" state="Alert" timeout="60" timestamp="2016-10-19T12:28:55">
    <oneNumber name="RA">
21.286945050311238958
    </oneNumber>
    <oneNumber name="DEC">
90
    </oneNumber>
</setNumberVector>

2016-10-19T12:28:56: Driver indi_eqmod_telescope: read setNumberVector EQMod Mount TIME_LST Ok
        LST='15.291776002393069334'
2016-10-19T12:28:56: Client 0: queuing <setNumberVector device='EQMod Mount' name='TIME_LST'>
2016-10-19T12:28:56: Driver indi_eqmod_telescope: read setNumberVector EQMod Mount JULIAN Ok
 JULIANDATE='2457681.0200445605442'
2016-10-19T12:28:56: Client 0: queuing <setNumberVector device='EQMod Mount' name='JULIAN'>
2016-10-19T12:28:56: Driver indi_eqmod_telescope: read setTextVector EQMod Mount TIME_UTC Ok
        UTC='2016-10-19T12:28:51'
     OFFSET='2'
2016-10-19T12:28:56: Client 0: queuing <setTextVector device='EQMod Mount' name='TIME_UTC'>
2016-10-19T12:28:56: Driver indi_eqmod_telescope: read message EQMod Mount   'Error:  -> tty write failed, check connection: Error: unrecognized error code'
2016-10-19T12:28:56: Client 0: queuing <message device='EQMod Mount' name=''>
2016-10-19T12:28:56: Driver indi_eqmod_telescope: read message EQMod Mount   'Disconnected from EQMod Mount.'
2016-10-19T12:28:56: Client 0: queuing <message device='EQMod Mount' name=''>
2016-10-19T12:28:56: Driver indi_eqmod_telescope: read setNumberVector EQMod Mount EQUATORIAL_EOD_COORD Alert
         RA='21.286945050311238958'
        DEC='90'
2016-10-19T12:28:56: Client 0: queuing <setNumberVector device='EQMod Mount' name='EQUATORIAL_EOD_COORD'>
2016-10-19T12:28:56: Driver indi_simulator_ccd: queuing snooped <setNumberVector device='EQMod Mount' name='EQUATORIAL_EOD_COORD'>
2016-10-19T12:28:56: Client 0: sending msg copy 1 nq 6:
<setNumberVector device="EQMod Mount" name="TIME_LST" state="Ok" timeout="0" timestamp="2016-10-19T12:28:56">
    <oneNumber name="LST">
15.291776002393069334
    </oneNumber>
</setNumberVector>

2016-10-19T12:28:56: Driver indi_simulator_ccd: sending msg copy 2 nq 1:
<setNumberVector device="EQMod Mount" name="EQUATORIAL_EOD_COORD" state="Alert" timeout="60" timestamp="2016-10-19T12:28:56">
    <oneNumber name="RA">
21.286945050311238958
    </oneNumber>
    <oneNumber name="DEC">
90
    </oneNumber>
</setNumberVector>

2016-10-19T12:28:56: Client 0: sending msg copy 1 nq 5:
<setNumberVector device="EQMod Mount" name="JULIAN" state="Ok" timeout="0" timestamp="2016-10-19T12:28:56">
    <oneNumber name="JULIANDATE">
2457681.0200445605442
    </oneNumber>
</setNumberVector>

2016-10-19T12:28:56: Client 0: sending msg copy 1 nq 4:
<setTextVector device="EQMod Mount" name="TIME_UTC" state="Ok" timeout="60" timestamp="2016-10-19T12:28:56">
    <oneText name="UTC">
2016-10-19T12:28:51
    </oneText>
    <oneText name="OFFSET">
2
    </oneText>
</setTextVector>

2016-10-19T12:28:56: Client 0: sending msg copy 1 nq 3:
<message device="EQMod Mount" timestamp="2016-10-19T12:28:56" message="Error:  -&gt; tty write failed, check connection: Error: unrecognized error code"/>

2016-10-19T12:28:56: Client 0: sending msg copy 1 nq 2:
<message device="EQMod Mount" timestamp="2016-10-19T12:28:56" message="Disconnected from EQMod Mount."/>

2016-10-19T12:28:56: Client 0: sending msg copy 1 nq 1:
<setNumberVector device="EQMod Mount" name="EQUATORIAL_EOD_COORD" state="Alert" timeout="60" timestamp="2016-10-19T12:28:56">
    <oneNumber name="RA">
21.286945050311238958
    </oneNumber>
    <oneNumber name="DEC">
90
    </oneNumber>
</setNumberVector>

2016-10-19T12:28:57: Driver indi_eqmod_telescope: read setNumberVector EQMod Mount TIME_LST Ok
        LST='15.292055088289977505'
2016-10-19T12:28:57: Client 0: queuing <setNumberVector device='EQMod Mount' name='TIME_LST'>
2016-10-19T12:28:57: Driver indi_eqmod_telescope: read setNumberVector EQMod Mount JULIAN Ok
 JULIANDATE='2457681.0200561573729'
2016-10-19T12:28:57: Client 0: queuing <setNumberVector device='EQMod Mount' name='JULIAN'>
2016-10-19T12:28:57: Driver indi_eqmod_telescope: read setTextVector EQMod Mount TIME_UTC Ok
        UTC='2016-10-19T12:28:52'
     OFFSET='2'
2016-10-19T12:28:57: Client 0: queuing <setTextVector device='EQMod Mount' name='TIME_UTC'>
2016-10-19T12:28:57: Driver indi_eqmod_telescope: read message EQMod Mount   'Error:  -> tty write failed, check connection: Error: unrecognized error code'
2016-10-19T12:28:57: Client 0: queuing <message device='EQMod Mount' name=''>
2016-10-19T12:28:57: Driver indi_eqmod_telescope: read message EQMod Mount   'Disconnected from EQMod Mount.'
2016-10-19T12:28:57: Client 0: queuing <message device='EQMod Mount' name=''>
2016-10-19T12:28:57: Driver indi_eqmod_telescope: read setNumberVector EQMod Mount EQUATORIAL_EOD_COORD Alert
         RA='21.286945050311238958'
        DEC='90'
2016-10-19T12:28:57: Client 0: queuing <setNumberVector device='EQMod Mount' name='EQUATORIAL_EOD_COORD'>
2016-10-19T12:28:57: Driver indi_simulator_ccd: queuing snooped <setNumberVector device='EQMod Mount' name='EQUATORIAL_EOD_COORD'>
2016-10-19T12:28:57: Client 0: sending msg copy 1 nq 6:
<setNumberVector device="EQMod Mount" name="TIME_LST" state="Ok" timeout="0" timestamp="2016-10-19T12:28:57">
    <oneNumber name="LST">
15.292055088289977505
    </oneNumber>
</setNumberVector>

2016-10-19T12:28:57: Driver indi_simulator_ccd: sending msg copy 2 nq 1:
<setNumberVector device="EQMod Mount" name="EQUATORIAL_EOD_COORD" state="Alert" timeout="60" timestamp="2016-10-19T12:28:57">
    <oneNumber name="RA">
21.286945050311238958
    </oneNumber>
    <oneNumber name="DEC">
90
    </oneNumber>
</setNumberVector>

2016-10-19T12:28:57: Client 0: sending msg copy 1 nq 5:
<setNumberVector device="EQMod Mount" name="JULIAN" state="Ok" timeout="0" timestamp="2016-10-19T12:28:57">
    <oneNumber name="JULIANDATE">
2457681.0200561573729
    </oneNumber>
</setNumberVector>

2016-10-19T12:28:57: Client 0: sending msg copy 1 nq 4:
<setTextVector device="EQMod Mount" name="TIME_UTC" state="Ok" timeout="60" timestamp="2016-10-19T12:28:57">
    <oneText name="UTC">
2016-10-19T12:28:52
    </oneText>
    <oneText name="OFFSET">
2
    </oneText>
</setTextVector>

2016-10-19T12:28:57: Client 0: sending msg copy 1 nq 3:
<message device="EQMod Mount" timestamp="2016-10-19T12:28:57" message="Error:  -&gt; tty write failed, check connection: Error: unrecognized error code"/>

2016-10-19T12:28:57: Client 0: sending msg copy 1 nq 2:
<message device="EQMod Mount" timestamp="2016-10-19T12:28:57" message="Disconnected from EQMod Mount."/>

2016-10-19T12:28:57: Client 0: sending msg copy 1 nq 1:
<setNumberVector device="EQMod Mount" name="EQUATORIAL_EOD_COORD" state="Alert" timeout="60" timestamp="2016-10-19T12:28:57">
    <oneNumber name="RA">
21.286945050311238958
    </oneNumber>
    <oneNumber name="DEC">
90
    </oneNumber>
</setNumberVector>

2016-10-19T12:28:58: Driver indi_eqmod_telescope: read setNumberVector EQMod Mount TIME_LST Ok
        LST='15.292334185424845572'
2016-10-19T12:28:58: Client 0: queuing <setNumberVector device='EQMod Mount' name='TIME_LST'>
2016-10-19T12:28:58: Driver indi_eqmod_telescope: read setNumberVector EQMod Mount JULIAN Ok
 JULIANDATE='2457681.0200677546673'
2016-10-19T12:28:58: Client 0: queuing <setNumberVector device='EQMod Mount' name='JULIAN'>
2016-10-19T12:28:58: Driver indi_eqmod_telescope: read setTextVector EQMod Mount TIME_UTC Ok
        UTC='2016-10-19T12:28:53'
     OFFSET='2'
2016-10-19T12:28:58: Client 0: queuing <setTextVector device='EQMod Mount' name='TIME_UTC'>
2016-10-19T12:28:58: Driver indi_eqmod_telescope: read message EQMod Mount   'Error:  -> tty write failed, check connection: Error: unrecognized error code'
2016-10-19T12:28:58: Client 0: queuing <message device='EQMod Mount' name=''>
2016-10-19T12:28:58: Driver indi_eqmod_telescope: read message EQMod Mount   'Disconnected from EQMod Mount.'
2016-10-19T12:28:58: Client 0: queuing <message device='EQMod Mount' name=''>
2016-10-19T12:28:58: Driver indi_eqmod_telescope: read setNumberVector EQMod Mount EQUATORIAL_EOD_COORD Alert
         RA='21.286945050311238958'
        DEC='90'
2016-10-19T12:28:58: Client 0: queuing <setNumberVector device='EQMod Mount' name='EQUATORIAL_EOD_COORD'>
2016-10-19T12:28:58: Driver indi_simulator_ccd: queuing snooped <setNumberVector device='EQMod Mount' name='EQUATORIAL_EOD_COORD'>
2016-10-19T12:28:58: Client 0: sending msg copy 1 nq 6:
<setNumberVector device="EQMod Mount" name="TIME_LST" state="Ok" timeout="0" timestamp="2016-10-19T12:28:58">
    <oneNumber name="LST">
15.292334185424845572
    </oneNumber>
</setNumberVector>

2016-10-19T12:28:58: Driver indi_simulator_ccd: sending msg copy 2 nq 1:
<setNumberVector device="EQMod Mount" name="EQUATORIAL_EOD_COORD" state="Alert" timeout="60" timestamp="2016-10-19T12:28:58">
    <oneNumber name="RA">
21.286945050311238958
    </oneNumber>
    <oneNumber name="DEC">
90
    </oneNumber>
</setNumberVector>

2016-10-19T12:28:58: Client 0: sending msg copy 1 nq 5:
<setNumberVector device="EQMod Mount" name="JULIAN" state="Ok" timeout="0" timestamp="2016-10-19T12:28:58">
    <oneNumber name="JULIANDATE">
2457681.0200677546673
    </oneNumber>
</setNumberVector>

2016-10-19T12:28:58: Client 0: sending msg copy 1 nq 4:
<setTextVector device="EQMod Mount" name="TIME_UTC" state="Ok" timeout="60" timestamp="2016-10-19T12:28:58">
    <oneText name="UTC">
2016-10-19T12:28:53
    </oneText>
    <oneText name="OFFSET">
2
    </oneText>
</setTextVector>

2016-10-19T12:28:58: Client 0: sending msg copy 1 nq 3:
<message device="EQMod Mount" timestamp="2016-10-19T12:28:58" message="Error:  -&gt; tty write failed, check connection: Error: unrecognized error code"/>

2016-10-19T12:28:58: Client 0: sending msg copy 1 nq 2:
<message device="EQMod Mount" timestamp="2016-10-19T12:28:58" message="Disconnected from EQMod Mount."/>

2016-10-19T12:28:58: Client 0: sending msg copy 1 nq 1:
<setNumberVector device="EQMod Mount" name="EQUATORIAL_EOD_COORD" state="Alert" timeout="60" timestamp="2016-10-19T12:28:58">
    <oneNumber name="RA">
21.286945050311238958
    </oneNumber>
    <oneNumber name="DEC">
90
    </oneNumber>
</setNumberVector>

2016-10-19T12:28:59: Driver indi_eqmod_telescope: read setNumberVector EQMod Mount TIME_LST Ok
        LST='15.292613316149415326'
2016-10-19T12:28:59: Client 0: queuing <setNumberVector device='EQMod Mount' name='TIME_LST'>
2016-10-19T12:28:59: Driver indi_eqmod_telescope: read setNumberVector EQMod Mount JULIAN Ok
 JULIANDATE='2457681.0200793533586'
2016-10-19T12:28:59: Client 0: queuing <setNumberVector device='EQMod Mount' name='JULIAN'>
2016-10-19T12:28:59: Driver indi_eqmod_telescope: read setTextVector EQMod Mount TIME_UTC Ok
        UTC='2016-10-19T12:28:54'
     OFFSET='2'
2016-10-19T12:28:59: Client 0: queuing <setTextVector device='EQMod Mount' name='TIME_UTC'>
2016-10-19T12:28:59: Driver indi_eqmod_telescope: read message EQMod Mount   'Error:  -> tty write failed, check connection: Error: unrecognized error code'
2016-10-19T12:28:59: Client 0: queuing <message device='EQMod Mount' name=''>
2016-10-19T12:28:59: Driver indi_eqmod_telescope: read message EQMod Mount   'Disconnected from EQMod Mount.'
2016-10-19T12:28:59: Client 0: queuing <message device='EQMod Mount' name=''>
2016-10-19T12:28:59: Driver indi_eqmod_telescope: read setNumberVector EQMod Mount EQUATORIAL_EOD_COORD Alert
         RA='21.286945050311238958'
        DEC='90'
2016-10-19T12:28:59: Client 0: queuing <setNumberVector device='EQMod Mount' name='EQUATORIAL_EOD_COORD'>
2016-10-19T12:28:59: Driver indi_simulator_ccd: queuing snooped <setNumberVector device='EQMod Mount' name='EQUATORIAL_EOD_COORD'>
2016-10-19T12:28:59: Client 0: sending msg copy 1 nq 6:
<setNumberVector device="EQMod Mount" name="TIME_LST" state="Ok" timeout="0" timestamp="2016-10-19T12:28:59">
    <oneNumber name="LST">
15.292613316149415326
    </oneNumber>
</setNumberVector>

2016-10-19T12:28:59: Driver indi_simulator_ccd: sending msg copy 2 nq 1:
<setNumberVector device="EQMod Mount" name="EQUATORIAL_EOD_COORD" state="Alert" timeout="60" timestamp="2016-10-19T12:28:59">
    <oneNumber name="RA">
21.286945050311238958
    </oneNumber>
    <oneNumber name="DEC">
90
    </oneNumber>
</setNumberVector>

2016-10-19T12:28:59: Client 0: sending msg copy 1 nq 5:
<setNumberVector device="EQMod Mount" name="JULIAN" state="Ok" timeout="0" timestamp="2016-10-19T12:28:59">
    <oneNumber name="JULIANDATE">
2457681.0200793533586
    </oneNumber>
</setNumberVector>

2016-10-19T12:28:59: Client 0: sending msg copy 1 nq 4:
<setTextVector device="EQMod Mount" name="TIME_UTC" state="Ok" timeout="60" timestamp="2016-10-19T12:28:59">
    <oneText name="UTC">
2016-10-19T12:28:54
    </oneText>
    <oneText name="OFFSET">
2
    </oneText>
</setTextVector>

2016-10-19T12:28:59: Client 0: sending msg copy 1 nq 3:
<message device="EQMod Mount" timestamp="2016-10-19T12:28:59" message="Error:  -&gt; tty write failed, check connection: Error: unrecognized error code"/>

2016-10-19T12:28:59: Client 0: sending msg copy 1 nq 2:
<message device="EQMod Mount" timestamp="2016-10-19T12:28:59" message="Disconnected from EQMod Mount."/>

2016-10-19T12:28:59: Client 0: sending msg copy 1 nq 1:
<setNumberVector device="EQMod Mount" name="EQUATORIAL_EOD_COORD" state="Alert" timeout="60" timestamp="2016-10-19T12:28:59">
    <oneNumber name="RA">
21.286945050311238958
    </oneNumber>
    <oneNumber name="DEC">
90
    </oneNumber>
</setNumberVector>

2016-10-19T12:29:00: Driver indi_eqmod_telescope: read setNumberVector EQMod Mount TIME_LST Ok
        LST='15.292892525353433797'
2016-10-19T12:29:00: Client 0: queuing <setNumberVector device='EQMod Mount' name='TIME_LST'>
2016-10-19T12:29:00: Driver indi_eqmod_telescope: read setNumberVector EQMod Mount JULIAN Ok
 JULIANDATE='2457681.0200909553096'
2016-10-19T12:29:00: Client 0: queuing <setNumberVector device='EQMod Mount' name='JULIAN'>
2016-10-19T12:29:00: Driver indi_eqmod_telescope: read setTextVector EQMod Mount TIME_UTC Ok
        UTC='2016-10-19T12:28:55'
     OFFSET='2'
2016-10-19T12:29:00: Client 0: queuing <setTextVector device='EQMod Mount' name='TIME_UTC'>
2016-10-19T12:29:00: Driver indi_eqmod_telescope: read message EQMod Mount   'Error:  -> tty write failed, check connection: Error: unrecognized error code'
2016-10-19T12:29:00: Client 0: queuing <message device='EQMod Mount' name=''>
2016-10-19T12:29:00: Driver indi_eqmod_telescope: read message EQMod Mount   'Disconnected from EQMod Mount.'
2016-10-19T12:29:00: Client 0: queuing <message device='EQMod Mount' name=''>
2016-10-19T12:29:00: Driver indi_eqmod_telescope: read setNumberVector EQMod Mount EQUATORIAL_EOD_COORD Alert
         RA='21.286945050311238958'
        DEC='90'
2016-10-19T12:29:00: Client 0: queuing <setNumberVector device='EQMod Mount' name='EQUATORIAL_EOD_COORD'>
2016-10-19T12:29:00: Driver indi_simulator_ccd: queuing snooped <setNumberVector device='EQMod Mount' name='EQUATORIAL_EOD_COORD'>
2016-10-19T12:29:00: Client 0: sending msg copy 1 nq 6:
<setNumberVector device="EQMod Mount" name="TIME_LST" state="Ok" timeout="0" timestamp="2016-10-19T12:29:00">
    <oneNumber name="LST">
15.292892525353433797
    </oneNumber>
</setNumberVector>

2016-10-19T12:29:00: Driver indi_simulator_ccd: sending msg copy 2 nq 1:
<setNumberVector device="EQMod Mount" name="EQUATORIAL_EOD_COORD" state="Alert" timeout="60" timestamp="2016-10-19T12:29:00">
    <oneNumber name="RA">
21.286945050311238958
    </oneNumber>
    <oneNumber name="DEC">
90
    </oneNumber>
</setNumberVector>

2016-10-19T12:29:00: Client 0: sending msg copy 1 nq 5:
<setNumberVector device="EQMod Mount" name="JULIAN" state="Ok" timeout="0" timestamp="2016-10-19T12:29:00">
    <oneNumber name="JULIANDATE">
2457681.0200909553096
    </oneNumber>
</setNumberVector>

2016-10-19T12:29:00: Client 0: sending msg copy 1 nq 4:
<setTextVector device="EQMod Mount" name="TIME_UTC" state="Ok" timeout="60" timestamp="2016-10-19T12:29:00">
    <oneText name="UTC">
2016-10-19T12:28:55
    </oneText>
    <oneText name="OFFSET">
2
    </oneText>
</setTextVector>

2016-10-19T12:29:00: Client 0: sending msg copy 1 nq 3:
<message device="EQMod Mount" timestamp="2016-10-19T12:29:00" message="Error:  -&gt; tty write failed, check connection: Error: unrecognized error code"/>

2016-10-19T12:29:00: Client 0: sending msg copy 1 nq 2:
<message device="EQMod Mount" timestamp="2016-10-19T12:29:00" message="Disconnected from EQMod Mount."/>

2016-10-19T12:29:00: Client 0: sending msg copy 1 nq 1:
<setNumberVector device="EQMod Mount" name="EQUATORIAL_EOD_COORD" state="Alert" timeout="60" timestamp="2016-10-19T12:29:00">
    <oneNumber name="RA">
21.286945050311238958
    </oneNumber>
    <oneNumber name="DEC">
90
    </oneNumber>
</setNumberVector>

2016-10-19T12:29:01: Driver indi_eqmod_telescope: read setNumberVector EQMod Mount TIME_LST Ok
        LST='15.293171723319492372'
2016-10-19T12:29:01: Client 0: queuing <setNumberVector device='EQMod Mount' name='TIME_LST'>
2016-10-19T12:29:01: Driver indi_eqmod_telescope: read setNumberVector EQMod Mount JULIAN Ok
 JULIANDATE='2457681.0201025567949'
2016-10-19T12:29:01: Client 0: queuing <setNumberVector device='EQMod Mount' name='JULIAN'>
2016-10-19T12:29:01: Driver indi_eqmod_telescope: read setTextVector EQMod Mount TIME_UTC Ok
        UTC='2016-10-19T12:28:56'
     OFFSET='2'
2016-10-19T12:29:01: Client 0: queuing <setTextVector device='EQMod Mount' name='TIME_UTC'>
2016-10-19T12:29:01: Driver indi_eqmod_telescope: read message EQMod Mount   'Error:  -> tty write failed, check connection: Error: unrecognized error code'
2016-10-19T12:29:01: Client 0: queuing <message device='EQMod Mount' name=''>
2016-10-19T12:29:01: Driver indi_eqmod_telescope: read message EQMod Mount   'Disconnected from EQMod Mount.'
2016-10-19T12:29:01: Client 0: queuing <message device='EQMod Mount' name=''>
2016-10-19T12:29:01: Driver indi_eqmod_telescope: read setNumberVector EQMod Mount EQUATORIAL_EOD_COORD Alert
         RA='21.286945050311238958'
        DEC='90'
2016-10-19T12:29:01: Client 0: queuing <setNumberVector device='EQMod Mount' name='EQUATORIAL_EOD_COORD'>
2016-10-19T12:29:01: Driver indi_simulator_ccd: queuing snooped <setNumberVector device='EQMod Mount' name='EQUATORIAL_EOD_COORD'>
2016-10-19T12:29:01: Client 0: sending msg copy 1 nq 6:
<setNumberVector device="EQMod Mount" name="TIME_LST" state="Ok" timeout="0" timestamp="2016-10-19T12:29:01">
    <oneNumber name="LST">
15.293171723319492372
    </oneNumber>
</setNumberVector>

2016-10-19T12:29:01: Driver indi_simulator_ccd: sending msg copy 2 nq 1:
<setNumberVector device="EQMod Mount" name="EQUATORIAL_EOD_COORD" state="Alert" timeout="60" timestamp="2016-10-19T12:29:01">
    <oneNumber name="RA">
21.286945050311238958
    </oneNumber>
    <oneNumber name="DEC">
90
    </oneNumber>
</setNumberVector>

2016-10-19T12:29:01: Client 0: sending msg copy 1 nq 5:
<setNumberVector device="EQMod Mount" name="JULIAN" state="Ok" timeout="0" timestamp="2016-10-19T12:29:01">
    <oneNumber name="JULIANDATE">
2457681.0201025567949
    </oneNumber>
</setNumberVector>

2016-10-19T12:29:01: Client 0: sending msg copy 1 nq 4:
<setTextVector device="EQMod Mount" name="TIME_UTC" state="Ok" timeout="60" timestamp="2016-10-19T12:29:01">
    <oneText name="UTC">
2016-10-19T12:28:56
    </oneText>
    <oneText name="OFFSET">
2
    </oneText>
</setTextVector>

2016-10-19T12:29:01: Client 0: sending msg copy 1 nq 3:
<message device="EQMod Mount" timestamp="2016-10-19T12:29:01" message="Error:  -&gt; tty write failed, check connection: Error: unrecognized error code"/>

2016-10-19T12:29:01: Client 0: sending msg copy 1 nq 2:
<message device="EQMod Mount" timestamp="2016-10-19T12:29:01" message="Disconnected from EQMod Mount."/>

2016-10-19T12:29:01: Client 0: sending msg copy 1 nq 1:
<setNumberVector device="EQMod Mount" name="EQUATORIAL_EOD_COORD" state="Alert" timeout="60" timestamp="2016-10-19T12:29:01">
    <oneNumber name="RA">
21.286945050311238958
    </oneNumber>
    <oneNumber name="DEC">
90
    </oneNumber>
</setNumberVector>

2016-10-19T12:29:02: Driver indi_eqmod_telescope: read setNumberVector EQMod Mount TIME_LST Ok
        LST='15.293450932523510843'
2016-10-19T12:29:02: Client 0: queuing <setNumberVector device='EQMod Mount' name='TIME_LST'>
2016-10-19T12:29:02: Driver indi_eqmod_telescope: read setNumberVector EQMod Mount JULIAN Ok
 JULIANDATE='2457681.0201141587459'
2016-10-19T12:29:02: Client 0: queuing <setNumberVector device='EQMod Mount' name='JULIAN'>
2016-10-19T12:29:02: Driver indi_eqmod_telescope: read setTextVector EQMod Mount TIME_UTC Ok
        UTC='2016-10-19T12:28:57'
     OFFSET='2'
2016-10-19T12:29:02: Client 0: queuing <setTextVector device='EQMod Mount' name='TIME_UTC'>
2016-10-19T12:29:02: Driver indi_eqmod_telescope: read message EQMod Mount   'Error:  -> tty write failed, check connection: Error: unrecognized error code'
2016-10-19T12:29:02: Client 0: queuing <message device='EQMod Mount' name=''>
2016-10-19T12:29:02: Driver indi_eqmod_telescope: read message EQMod Mount   'Disconnected from EQMod Mount.'
2016-10-19T12:29:02: Client 0: queuing <message device='EQMod Mount' name=''>
2016-10-19T12:29:02: Driver indi_eqmod_telescope: read setNumberVector EQMod Mount EQUATORIAL_EOD_COORD Alert
         RA='21.286945050311238958'
        DEC='90'
2016-10-19T12:29:02: Client 0: queuing <setNumberVector device='EQMod Mount' name='EQUATORIAL_EOD_COORD'>
2016-10-19T12:29:02: Driver indi_simulator_ccd: queuing snooped <setNumberVector device='EQMod Mount' name='EQUATORIAL_EOD_COORD'>
2016-10-19T12:29:02: Client 0: sending msg copy 1 nq 6:
<setNumberVector device="EQMod Mount" name="TIME_LST" state="Ok" timeout="0" timestamp="2016-10-19T12:29:02">
    <oneNumber name="LST">
15.293450932523510843
    </oneNumber>
</setNumberVector>

2016-10-19T12:29:02: Driver indi_simulator_ccd: sending msg copy 2 nq 1:
<setNumberVector device="EQMod Mount" name="EQUATORIAL_EOD_COORD" state="Alert" timeout="60" timestamp="2016-10-19T12:29:02">
    <oneNumber name="RA">
21.286945050311238958
    </oneNumber>
    <oneNumber name="DEC">
90
    </oneNumber>
</setNumberVector>

2016-10-19T12:29:02: Client 0: sending msg copy 1 nq 5:
<setNumberVector device="EQMod Mount" name="JULIAN" state="Ok" timeout="0" timestamp="2016-10-19T12:29:02">
    <oneNumber name="JULIANDATE">
2457681.0201141587459
    </oneNumber>
</setNumberVector>

2016-10-19T12:29:02: Client 0: sending msg copy 1 nq 4:
<setTextVector device="EQMod Mount" name="TIME_UTC" state="Ok" timeout="60" timestamp="2016-10-19T12:29:02">
    <oneText name="UTC">
2016-10-19T12:28:57
    </oneText>
    <oneText name="OFFSET">
2
    </oneText>
</setTextVector>

2016-10-19T12:29:02: Client 0: sending msg copy 1 nq 3:
<message device="EQMod Mount" timestamp="2016-10-19T12:29:02" message="Error:  -&gt; tty write failed, check connection: Error: unrecognized error code"/>

2016-10-19T12:29:02: Client 0: sending msg copy 1 nq 2:
<message device="EQMod Mount" timestamp="2016-10-19T12:29:02" message="Disconnected from EQMod Mount."/>

2016-10-19T12:29:02: Client 0: sending msg copy 1 nq 1:
<setNumberVector device="EQMod Mount" name="EQUATORIAL_EOD_COORD" state="Alert" timeout="60" timestamp="2016-10-19T12:29:02">
    <oneNumber name="RA">
21.286945050311238958
    </oneNumber>
    <oneNumber name="DEC">
90
    </oneNumber>
</setNumberVector>

2016-10-19T12:29:03: Driver indi_eqmod_telescope: read setNumberVector EQMod Mount TIME_LST Ok
        LST='15.293730130489569419'
2016-10-19T12:29:03: Client 0: queuing <setNumberVector device='EQMod Mount' name='TIME_LST'>
2016-10-19T12:29:03: Driver indi_eqmod_telescope: read setNumberVector EQMod Mount JULIAN Ok
 JULIANDATE='2457681.0201257602312'
2016-10-19T12:29:03: Client 0: queuing <setNumberVector device='EQMod Mount' name='JULIAN'>
2016-10-19T12:29:03: Driver indi_eqmod_telescope: read setTextVector EQMod Mount TIME_UTC Ok
        UTC='2016-10-19T12:28:58'
     OFFSET='2'
2016-10-19T12:29:03: Client 0: queuing <setTextVector device='EQMod Mount' name='TIME_UTC'>
2016-10-19T12:29:03: Driver indi_eqmod_telescope: read message EQMod Mount   'Error:  -> tty write failed, check connection: Error: unrecognized error code'
2016-10-19T12:29:03: Client 0: queuing <message device='EQMod Mount' name=''>
2016-10-19T12:29:03: Driver indi_eqmod_telescope: read message EQMod Mount   'Disconnected from EQMod Mount.'
2016-10-19T12:29:03: Client 0: queuing <message device='EQMod Mount' name=''>
2016-10-19T12:29:03: Driver indi_eqmod_telescope: read setNumberVector EQMod Mount EQUATORIAL_EOD_COORD Alert
         RA='21.286945050311238958'
        DEC='90'
2016-10-19T12:29:03: Client 0: queuing <setNumberVector device='EQMod Mount' name='EQUATORIAL_EOD_COORD'>
2016-10-19T12:29:03: Driver indi_simulator_ccd: queuing snooped <setNumberVector device='EQMod Mount' name='EQUATORIAL_EOD_COORD'>
2016-10-19T12:29:03: Client 0: sending msg copy 1 nq 6:
<setNumberVector device="EQMod Mount" name="TIME_LST" state="Ok" timeout="0" timestamp="2016-10-19T12:29:03">
    <oneNumber name="LST">
15.293730130489569419
    </oneNumber>
</setNumberVector>

2016-10-19T12:29:03: Driver indi_simulator_ccd: sending msg copy 2 nq 1:
<setNumberVector device="EQMod Mount" name="EQUATORIAL_EOD_COORD" state="Alert" timeout="60" timestamp="2016-10-19T12:29:03">
    <oneNumber name="RA">
21.286945050311238958
    </oneNumber>
    <oneNumber name="DEC">
90
    </oneNumber>
</setNumberVector>

2016-10-19T12:29:03: Client 0: sending msg copy 1 nq 5:
<setNumberVector device="EQMod Mount" name="JULIAN" state="Ok" timeout="0" timestamp="2016-10-19T12:29:03">
    <oneNumber name="JULIANDATE">
2457681.0201257602312
    </oneNumber>
</setNumberVector>

2016-10-19T12:29:03: Client 0: sending msg copy 1 nq 4:
<setTextVector device="EQMod Mount" name="TIME_UTC" state="Ok" timeout="60" timestamp="2016-10-19T12:29:03">
    <oneText name="UTC">
2016-10-19T12:28:58
    </oneText>
    <oneText name="OFFSET">
2
    </oneText>
</setTextVector>

2016-10-19T12:29:03: Client 0: sending msg copy 1 nq 3:
<message device="EQMod Mount" timestamp="2016-10-19T12:29:03" message="Error:  -&gt; tty write failed, check connection: Error: unrecognized error code"/>

2016-10-19T12:29:03: Client 0: sending msg copy 1 nq 2:
<message device="EQMod Mount" timestamp="2016-10-19T12:29:03" message="Disconnected from EQMod Mount."/>

2016-10-19T12:29:03: Client 0: sending msg copy 1 nq 1:
<setNumberVector device="EQMod Mount" name="EQUATORIAL_EOD_COORD" state="Alert" timeout="60" timestamp="2016-10-19T12:29:03">
    <oneNumber name="RA">
21.286945050311238958
    </oneNumber>
    <oneNumber name="DEC">
90
    </oneNumber>
</setNumberVector>

2016-10-19T12:29:04: Driver indi_eqmod_telescope: read setNumberVector EQMod Mount TIME_LST Ok
        LST='15.294009384490204084'
2016-10-19T12:29:04: Client 0: queuing <setNumberVector device='EQMod Mount' name='TIME_LST'>
2016-10-19T12:29:04: Driver indi_eqmod_telescope: read setNumberVector EQMod Mount JULIAN Ok
 JULIANDATE='2457681.0201373640448'
2016-10-19T12:29:04: Client 0: queuing <setNumberVector device='EQMod Mount' name='JULIAN'>
2016-10-19T12:29:04: Driver indi_eqmod_telescope: read setTextVector EQMod Mount TIME_UTC Ok
        UTC='2016-10-19T12:28:59'
     OFFSET='2'
2016-10-19T12:29:04: Client 0: queuing <setTextVector device='EQMod Mount' name='TIME_UTC'>
2016-10-19T12:29:04: Driver indi_eqmod_telescope: read message EQMod Mount   'Error:  -> tty write failed, check connection: Error: unrecognized error code'
2016-10-19T12:29:04: Client 0: queuing <message device='EQMod Mount' name=''>
2016-10-19T12:29:04: Driver indi_eqmod_telescope: read message EQMod Mount   'Disconnected from EQMod Mount.'
2016-10-19T12:29:04: Client 0: queuing <message device='EQMod Mount' name=''>
2016-10-19T12:29:04: Driver indi_eqmod_telescope: read setNumberVector EQMod Mount EQUATORIAL_EOD_COORD Alert
         RA='21.286945050311238958'
        DEC='90'
2016-10-19T12:29:04: Client 0: queuing <setNumberVector device='EQMod Mount' name='EQUATORIAL_EOD_COORD'>
2016-10-19T12:29:04: Driver indi_simulator_ccd: queuing snooped <setNumberVector device='EQMod Mount' name='EQUATORIAL_EOD_COORD'>
2016-10-19T12:29:04: Client 0: sending msg copy 1 nq 6:
<setNumberVector device="EQMod Mount" name="TIME_LST" state="Ok" timeout="0" timestamp="2016-10-19T12:29:04">
    <oneNumber name="LST">
15.294009384490204084
    </oneNumber>
</setNumberVector>

2016-10-19T12:29:04: Driver indi_simulator_ccd: sending msg copy 2 nq 1:
<setNumberVector device="EQMod Mount" name="EQUATORIAL_EOD_COORD" state="Alert" timeout="60" timestamp="2016-10-19T12:29:04">
    <oneNumber name="RA">
21.286945050311238958
    </oneNumber>
    <oneNumber name="DEC">
90
    </oneNumber>
</setNumberVector>

2016-10-19T12:29:04: Client 0: sending msg copy 1 nq 5:
<setNumberVector device="EQMod Mount" name="JULIAN" state="Ok" timeout="0" timestamp="2016-10-19T12:29:04">
    <oneNumber name="JULIANDATE">
2457681.0201373640448
    </oneNumber>
</setNumberVector>

2016-10-19T12:29:04: Client 0: sending msg copy 1 nq 4:
<setTextVector device="EQMod Mount" name="TIME_UTC" state="Ok" timeout="60" timestamp="2016-10-19T12:29:04">
    <oneText name="UTC">
2016-10-19T12:28:59
    </oneText>
    <oneText name="OFFSET">
2
    </oneText>
</setTextVector>

2016-10-19T12:29:04: Client 0: sending msg copy 1 nq 3:
<message device="EQMod Mount" timestamp="2016-10-19T12:29:04" message="Error:  -&gt; tty write failed, check connection: Error: unrecognized error code"/>

2016-10-19T12:29:04: Client 0: sending msg copy 1 nq 2:
<message device="EQMod Mount" timestamp="2016-10-19T12:29:04" message="Disconnected from EQMod Mount."/>

2016-10-19T12:29:04: Client 0: sending msg copy 1 nq 1:
<setNumberVector device="EQMod Mount" name="EQUATORIAL_EOD_COORD" state="Alert" timeout="60" timestamp="2016-10-19T12:29:04">
    <oneNumber name="RA">
21.286945050311238958
    </oneNumber>
    <oneNumber name="DEC">
90
    </oneNumber>
</setNumberVector>

2016-10-19T12:29:05: Driver indi_eqmod_telescope: read setNumberVector EQMod Mount TIME_LST Ok
        LST='15.294288593694222556'
2016-10-19T12:29:05: Client 0: queuing <setNumberVector device='EQMod Mount' name='TIME_LST'>
2016-10-19T12:29:05: Driver indi_eqmod_telescope: read setNumberVector EQMod Mount JULIAN Ok
 JULIANDATE='2457681.0201489659958'
2016-10-19T12:29:05: Client 0: queuing <setNumberVector device='EQMod Mount' name='JULIAN'>
2016-10-19T12:29:05: Driver indi_eqmod_telescope: read setTextVector EQMod Mount TIME_UTC Ok
        UTC='2016-10-19T12:29:00'
     OFFSET='2'
2016-10-19T12:29:05: Client 0: queuing <setTextVector device='EQMod Mount' name='TIME_UTC'>
2016-10-19T12:29:05: Driver indi_eqmod_telescope: read message EQMod Mount   'Error:  -> tty write failed, check connection: Error: unrecognized error code'
2016-10-19T12:29:05: Client 0: queuing <message device='EQMod Mount' name=''>
2016-10-19T12:29:05: Driver indi_eqmod_telescope: read message EQMod Mount   'Disconnected from EQMod Mount.'
2016-10-19T12:29:05: Client 0: queuing <message device='EQMod Mount' name=''>
2016-10-19T12:29:05: Driver indi_eqmod_telescope: read setNumberVector EQMod Mount EQUATORIAL_EOD_COORD Alert
         RA='21.286945050311238958'
        DEC='90'
2016-10-19T12:29:05: Client 0: queuing <setNumberVector device='EQMod Mount' name='EQUATORIAL_EOD_COORD'>
2016-10-19T12:29:05: Driver indi_simulator_ccd: queuing snooped <setNumberVector device='EQMod Mount' name='EQUATORIAL_EOD_COORD'>
2016-10-19T12:29:05: Client 0: sending msg copy 1 nq 6:
<setNumberVector device="EQMod Mount" name="TIME_LST" state="Ok" timeout="0" timestamp="2016-10-19T12:29:05">
    <oneNumber name="LST">
15.294288593694222556
    </oneNumber>
</setNumberVector>

2016-10-19T12:29:05: Driver indi_simulator_ccd: sending msg copy 2 nq 1:
<setNumberVector device="EQMod Mount" name="EQUATORIAL_EOD_COORD" state="Alert" timeout="60" timestamp="2016-10-19T12:29:05">
    <oneNumber name="RA">
21.286945050311238958
    </oneNumber>
    <oneNumber name="DEC">
90
    </oneNumber>
</setNumberVector>

2016-10-19T12:29:05: Client 0: sending msg copy 1 nq 5:
<setNumberVector device="EQMod Mount" name="JULIAN" state="Ok" timeout="0" timestamp="2016-10-19T12:29:05">
    <oneNumber name="JULIANDATE">
2457681.0201489659958
    </oneNumber>
</setNumberVector>

2016-10-19T12:29:05: Client 0: sending msg copy 1 nq 4:
<setTextVector device="EQMod Mount" name="TIME_UTC" state="Ok" timeout="60" timestamp="2016-10-19T12:29:05">
    <oneText name="UTC">
2016-10-19T12:29:00
    </oneText>
    <oneText name="OFFSET">
2
    </oneText>
</setTextVector>

2016-10-19T12:29:05: Client 0: sending msg copy 1 nq 3:
<message device="EQMod Mount" timestamp="2016-10-19T12:29:05" message="Error:  -&gt; tty write failed, check connection: Error: unrecognized error code"/>

2016-10-19T12:29:05: Client 0: sending msg copy 1 nq 2:
<message device="EQMod Mount" timestamp="2016-10-19T12:29:05" message="Disconnected from EQMod Mount."/>

2016-10-19T12:29:05: Client 0: sending msg copy 1 nq 1:
<setNumberVector device="EQMod Mount" name="EQUATORIAL_EOD_COORD" state="Alert" timeout="60" timestamp="2016-10-19T12:29:05">
    <oneNumber name="RA">
21.286945050311238958
    </oneNumber>
    <oneNumber name="DEC">
90
    </oneNumber>
</setNumberVector>

2016-10-19T12:29:06: Driver indi_eqmod_telescope: read setNumberVector EQMod Mount TIME_LST Ok
        LST='15.294567791660281131'
2016-10-19T12:29:06: Client 0: queuing <setNumberVector device='EQMod Mount' name='TIME_LST'>
2016-10-19T12:29:06: Driver indi_eqmod_telescope: read setNumberVector EQMod Mount JULIAN Ok
 JULIANDATE='2457681.0201605674811'
2016-10-19T12:29:06: Client 0: queuing <setNumberVector device='EQMod Mount' name='JULIAN'>
2016-10-19T12:29:06: Driver indi_eqmod_telescope: read setTextVector EQMod Mount TIME_UTC Ok
        UTC='2016-10-19T12:29:01'
     OFFSET='2'
2016-10-19T12:29:06: Client 0: queuing <setTextVector device='EQMod Mount' name='TIME_UTC'>
2016-10-19T12:29:06: Driver indi_eqmod_telescope: read message EQMod Mount   'Error:  -> tty write failed, check connection: Error: unrecognized error code'
2016-10-19T12:29:06: Client 0: queuing <message device='EQMod Mount' name=''>
2016-10-19T12:29:06: Driver indi_eqmod_telescope: read message EQMod Mount   'Disconnected from EQMod Mount.'
2016-10-19T12:29:06: Client 0: queuing <message device='EQMod Mount' name=''>
2016-10-19T12:29:06: Driver indi_eqmod_telescope: read setNumberVector EQMod Mount EQUATORIAL_EOD_COORD Alert
         RA='21.286945050311238958'
        DEC='90'
2016-10-19T12:29:06: Client 0: queuing <setNumberVector device='EQMod Mount' name='EQUATORIAL_EOD_COORD'>
2016-10-19T12:29:06: Driver indi_simulator_ccd: queuing snooped <setNumberVector device='EQMod Mount' name='EQUATORIAL_EOD_COORD'>
2016-10-19T12:29:06: Client 0: sending msg copy 1 nq 6:
<setNumberVector device="EQMod Mount" name="TIME_LST" state="Ok" timeout="0" timestamp="2016-10-19T12:29:06">
    <oneNumber name="LST">
15.294567791660281131
    </oneNumber>
</setNumberVector>

2016-10-19T12:29:06: Driver indi_simulator_ccd: sending msg copy 2 nq 1:
<setNumberVector device="EQMod Mount" name="EQUATORIAL_EOD_COORD" state="Alert" timeout="60" timestamp="2016-10-19T12:29:06">
    <oneNumber name="RA">
21.286945050311238958
    </oneNumber>
    <oneNumber name="DEC">
90
    </oneNumber>
</setNumberVector>

2016-10-19T12:29:06: Client 0: sending msg copy 1 nq 5:
<setNumberVector device="EQMod Mount" name="JULIAN" state="Ok" timeout="0" timestamp="2016-10-19T12:29:06">
    <oneNumber name="JULIANDATE">
2457681.0201605674811
    </oneNumber>
</setNumberVector>

2016-10-19T12:29:06: Client 0: sending msg copy 1 nq 4:
<setTextVector device="EQMod Mount" name="TIME_UTC" state="Ok" timeout="60" timestamp="2016-10-19T12:29:06">
    <oneText name="UTC">
2016-10-19T12:29:01
    </oneText>
    <oneText name="OFFSET">
2
    </oneText>
</setTextVector>

2016-10-19T12:29:06: Client 0: sending msg copy 1 nq 3:
<message device="EQMod Mount" timestamp="2016-10-19T12:29:06" message="Error:  -&gt; tty write failed, check connection: Error: unrecognized error code"/>

2016-10-19T12:29:06: Client 0: sending msg copy 1 nq 2:
<message device="EQMod Mount" timestamp="2016-10-19T12:29:06" message="Disconnected from EQMod Mount."/>

2016-10-19T12:29:06: Client 0: sending msg copy 1 nq 1:
<setNumberVector device="EQMod Mount" name="EQUATORIAL_EOD_COORD" state="Alert" timeout="60" timestamp="2016-10-19T12:29:06">
    <oneNumber name="RA">
21.286945050311238958
    </oneNumber>
    <oneNumber name="DEC">
90
    </oneNumber>
</setNumberVector>

2016-10-19T12:29:07: Client 0: read newSwitchVector CCD Simulator CONNECTION 
 DISCONNECT='On'
2016-10-19T12:29:07: Driver indi_simulator_ccd: queuing responsible for <newSwitchVector device='CCD Simulator' name='CONNECTION'>
2016-10-19T12:29:07: Driver indi_simulator_ccd: sending msg copy 1 nq 1:
<newSwitchVector device="CCD Simulator" name="CONNECTION">
    <oneSwitch name="DISCONNECT">
On
    </oneSwitch>
</newSwitchVector>

2016-10-19T12:29:07: Driver indi_simulator_ccd: read setSwitchVector CCD Simulator CONNECTION Idle
    CONNECT='Off'
 DISCONNECT='On'
2016-10-19T12:29:07: Client 0: queuing <setSwitchVector device='CCD Simulator' name='CONNECTION'>
2016-10-19T12:29:07: Driver indi_simulator_ccd: read delProperty CCD Simulator CCD_FRAME 
2016-10-19T12:29:07: Client 0: queuing <delProperty device='CCD Simulator' name='CCD_FRAME'>
2016-10-19T12:29:07: Driver indi_simulator_ccd: read delProperty CCD Simulator CCD_INFO 
2016-10-19T12:29:07: Client 0: queuing <delProperty device='CCD Simulator' name='CCD_INFO'>
2016-10-19T12:29:07: Driver indi_simulator_ccd: read delProperty CCD Simulator CCD_BINNING 
2016-10-19T12:29:07: Client 0: queuing <delProperty device='CCD Simulator' name='CCD_BINNING'>
2016-10-19T12:29:07: Driver indi_simulator_ccd: read delProperty CCD Simulator CCD_EXPOSURE 
2016-10-19T12:29:07: Client 0: queuing <delProperty device='CCD Simulator' name='CCD_EXPOSURE'>
2016-10-19T12:29:07: Driver indi_simulator_ccd: read delProperty CCD Simulator CCD_ABORT_EXPOSURE 
2016-10-19T12:29:07: Client 0: queuing <delProperty device='CCD Simulator' name='CCD_ABORT_EXPOSURE'>
2016-10-19T12:29:07: Driver indi_simulator_ccd: read delProperty CCD Simulator CCD1 
2016-10-19T12:29:07: Client 0: queuing <delProperty device='CCD Simulator' name='CCD1'>
2016-10-19T12:29:07: Driver indi_simulator_ccd: read delProperty CCD Simulator CCD_COMPRESSION 
2016-10-19T12:29:07: Client 0: queuing <delProperty device='CCD Simulator' name='CCD_COMPRESSION'>
2016-10-19T12:29:07: Driver indi_simulator_ccd: read delProperty CCD Simulator CCD_RAPID_GUIDE 
2016-10-19T12:29:07: Client 0: queuing <delProperty device='CCD Simulator' name='CCD_RAPID_GUIDE'>
2016-10-19T12:29:07: Driver indi_simulator_ccd: read delProperty CCD Simulator GUIDER_EXPOSURE 
2016-10-19T12:29:07: Client 0: queuing <delProperty device='CCD Simulator' name='GUIDER_EXPOSURE'>
2016-10-19T12:29:07: Driver indi_simulator_ccd: read delProperty CCD Simulator GUIDER_ABORT_EXPOSURE 
2016-10-19T12:29:07: Client 0: queuing <delProperty device='CCD Simulator' name='GUIDER_ABORT_EXPOSURE'>
2016-10-19T12:29:07: Driver indi_simulator_ccd: read delProperty CCD Simulator GUIDER_FRAME 
2016-10-19T12:29:07: Client 0: queuing <delProperty device='CCD Simulator' name='GUIDER_FRAME'>
2016-10-19T12:29:07: Driver indi_simulator_ccd: read delProperty CCD Simulator GUIDER_INFO 
2016-10-19T12:29:07: Client 0: queuing <delProperty device='CCD Simulator' name='GUIDER_INFO'>
2016-10-19T12:29:07: Driver indi_simulator_ccd: read delProperty CCD Simulator CCD2 
2016-10-19T12:29:07: Client 0: queuing <delProperty device='CCD Simulator' name='CCD2'>
2016-10-19T12:29:07: Driver indi_simulator_ccd: read delProperty CCD Simulator GUIDER_BINNING 
2016-10-19T12:29:07: Client 0: queuing <delProperty device='CCD Simulator' name='GUIDER_BINNING'>
2016-10-19T12:29:07: Driver indi_simulator_ccd: read delProperty CCD Simulator GUIDER_COMPRESSION 
2016-10-19T12:29:07: Client 0: queuing <delProperty device='CCD Simulator' name='GUIDER_COMPRESSION'>
2016-10-19T12:29:07: Driver indi_simulator_ccd: read delProperty CCD Simulator GUIDER_FRAME_TYPE 
2016-10-19T12:29:07: Client 0: queuing <delProperty device='CCD Simulator' name='GUIDER_FRAME_TYPE'>
2016-10-19T12:29:07: Driver indi_simulator_ccd: read delProperty CCD Simulator GUIDER_RAPID_GUIDE 
2016-10-19T12:29:07: Client 0: queuing <delProperty device='CCD Simulator' name='GUIDER_RAPID_GUIDE'>
2016-10-19T12:29:07: Driver indi_simulator_ccd: read delProperty CCD Simulator CCD_TEMPERATURE 
2016-10-19T12:29:07: Client 0: queuing <delProperty device='CCD Simulator' name='CCD_TEMPERATURE'>
2016-10-19T12:29:07: Driver indi_simulator_ccd: read delProperty CCD Simulator TELESCOPE_TIMED_GUIDE_NS 
2016-10-19T12:29:07: Client 0: queuing <delProperty device='CCD Simulator' name='TELESCOPE_TIMED_GUIDE_NS'>
2016-10-19T12:29:07: Driver indi_simulator_ccd: read delProperty CCD Simulator TELESCOPE_TIMED_GUIDE_WE 
2016-10-19T12:29:07: Client 0: queuing <delProperty device='CCD Simulator' name='TELESCOPE_TIMED_GUIDE_WE'>
2016-10-19T12:29:07: Driver indi_simulator_ccd: read delProperty CCD Simulator CCD_FRAME_TYPE 
2016-10-19T12:29:07: Client 0: queuing <delProperty device='CCD Simulator' name='CCD_FRAME_TYPE'>
2016-10-19T12:29:07: Driver indi_simulator_ccd: read delProperty CCD Simulator CCD_FRAME_RESET 
2016-10-19T12:29:07: Client 0: queuing <delProperty device='CCD Simulator' name='CCD_FRAME_RESET'>
2016-10-19T12:29:07: Driver indi_simulator_ccd: read delProperty CCD Simulator ASTROMETRY_SOLVER 
2016-10-19T12:29:07: Client 0: queuing <delProperty device='CCD Simulator' name='ASTROMETRY_SOLVER'>
2016-10-19T12:29:07: Driver indi_simulator_ccd: read delProperty CCD Simulator ASTROMETRY_SETTINGS 
2016-10-19T12:29:07: Client 0: queuing <delProperty device='CCD Simulator' name='ASTROMETRY_SETTINGS'>
2016-10-19T12:29:07: Driver indi_simulator_ccd: read delProperty CCD Simulator WCS_CONTROL 
2016-10-19T12:29:07: Client 0: queuing <delProperty device='CCD Simulator' name='WCS_CONTROL'>
2016-10-19T12:29:07: Driver indi_simulator_ccd: read delProperty CCD Simulator UPLOAD_MODE 
2016-10-19T12:29:07: Client 0: queuing <delProperty device='CCD Simulator' name='UPLOAD_MODE'>
2016-10-19T12:29:07: Driver indi_simulator_ccd: read delProperty CCD Simulator UPLOAD_SETTINGS 
2016-10-19T12:29:07: Client 0: queuing <delProperty device='CCD Simulator' name='UPLOAD_SETTINGS'>
2016-10-19T12:29:07: Driver indi_simulator_ccd: read delProperty CCD Simulator CCD_COOLER 
2016-10-19T12:29:07: Client 0: queuing <delProperty device='CCD Simulator' name='CCD_COOLER'>
2016-10-19T12:29:07: Driver indi_simulator_ccd: read delProperty CCD Simulator FILTER_SLOT 
2016-10-19T12:29:07: Client 0: queuing <delProperty device='CCD Simulator' name='FILTER_SLOT'>
2016-10-19T12:29:07: Driver indi_simulator_ccd: queuing snooped <delProperty device='CCD Simulator' name='FILTER_SLOT'>
2016-10-19T12:29:07: Driver indi_simulator_ccd: read delProperty CCD Simulator FILTER_NAME 
2016-10-19T12:29:07: Client 0: queuing <delProperty device='CCD Simulator' name='FILTER_NAME'>
2016-10-19T12:29:07: Driver indi_simulator_ccd: queuing snooped <delProperty device='CCD Simulator' name='FILTER_NAME'>
2016-10-19T12:29:07: Client 0: read newSwitchVector EQMod Mount CONNECTION 
 DISCONNECT='On'
2016-10-19T12:29:07: Driver indi_eqmod_telescope: queuing responsible for <newSwitchVector device='EQMod Mount' name='CONNECTION'>
2016-10-19T12:29:07: Client 0: sending msg copy 1 nq 31:
<setSwitchVector device="CCD Simulator" name="CONNECTION" state="Idle" timeout="60" timestamp="2016-10-19T12:29:07">
    <oneSwitch name="CONNECT">
Off
    </oneSwitch>
    <oneSwitch name="DISCONNECT">
On
    </oneSwitch>
</setSwitchVector>

2016-10-19T12:29:07: Driver indi_simulator_ccd: sending msg copy 2 nq 2:
<delProperty device="CCD Simulator" name="FILTER_SLOT" timestamp="2016-10-19T12:29:07"/>

2016-10-19T12:29:07: Client 0: sending msg copy 1 nq 30:
<delProperty device="CCD Simulator" name="CCD_FRAME" timestamp="2016-10-19T12:29:07"/>

2016-10-19T12:29:07: Driver indi_simulator_ccd: sending msg copy 2 nq 1:
<delProperty device="CCD Simulator" name="FILTER_NAME" timestamp="2016-10-19T12:29:07"/>

2016-10-19T12:29:07: Driver indi_eqmod_telescope: sending msg copy 1 nq 1:
<newSwitchVector device="EQMod Mount" name="CONNECTION">
    <oneSwitch name="DISCONNECT">
On
    </oneSwitch>
</newSwitchVector>

2016-10-19T12:29:07: Client 0: sending msg copy 1 nq 29:
<delProperty device="CCD Simulator" name="CCD_INFO" timestamp="2016-10-19T12:29:07"/>

2016-10-19T12:29:07: Driver indi_eqmod_telescope: read message EQMod Mount   'Disconnected from EQMod Mount.'
2016-10-19T12:29:07: Client 0: queuing <message device='EQMod Mount' name=''>
2016-10-19T12:29:07: Driver indi_eqmod_telescope: read setSwitchVector EQMod Mount CONNECTION Idle
    CONNECT='Off'
 DISCONNECT='On'
2016-10-19T12:29:07: Client 0: queuing <setSwitchVector device='EQMod Mount' name='CONNECTION'>
2016-10-19T12:29:07: Driver indi_eqmod_telescope: read delProperty EQMod Mount ON_COORD_SET 
2016-10-19T12:29:07: Client 0: queuing <delProperty device='EQMod Mount' name='ON_COORD_SET'>
2016-10-19T12:29:07: Driver indi_eqmod_telescope: read delProperty EQMod Mount EQUATORIAL_EOD_COORD 
2016-10-19T12:29:07: Client 0: queuing <delProperty device='EQMod Mount' name='EQUATORIAL_EOD_COORD'>
2016-10-19T12:29:07: Driver indi_simulator_ccd: queuing snooped <delProperty device='EQMod Mount' name='EQUATORIAL_EOD_COORD'>
2016-10-19T12:29:07: Driver indi_eqmod_telescope: read delProperty EQMod Mount TELESCOPE_ABORT_MOTION 
2016-10-19T12:29:07: Client 0: queuing <delProperty device='EQMod Mount' name='TELESCOPE_ABORT_MOTION'>
2016-10-19T12:29:07: Driver indi_eqmod_telescope: read delProperty EQMod Mount TELESCOPE_MOTION_NS 
2016-10-19T12:29:07: Client 0: queuing <delProperty device='EQMod Mount' name='TELESCOPE_MOTION_NS'>
2016-10-19T12:29:07: Driver indi_eqmod_telescope: read delProperty EQMod Mount TELESCOPE_MOTION_WE 
2016-10-19T12:29:07: Client 0: queuing <delProperty device='EQMod Mount' name='TELESCOPE_MOTION_WE'>
2016-10-19T12:29:07: Driver indi_eqmod_telescope: read delProperty EQMod Mount TELESCOPE_SLEW_RATE 
2016-10-19T12:29:07: Client 0: queuing <delProperty device='EQMod Mount' name='TELESCOPE_SLEW_RATE'>
2016-10-19T12:29:07: Driver indi_eqmod_telescope: read delProperty EQMod Mount TIME_UTC 
2016-10-19T12:29:07: Client 0: queuing <delProperty device='EQMod Mount' name='TIME_UTC'>
2016-10-19T12:29:07: Driver indi_eqmod_telescope: read delProperty EQMod Mount GEOGRAPHIC_COORD 
2016-10-19T12:29:07: Client 0: queuing <delProperty device='EQMod Mount' name='GEOGRAPHIC_COORD'>
2016-10-19T12:29:07: Driver indi_eqmod_telescope: read delProperty EQMod Mount TELESCOPE_PARK 
2016-10-19T12:29:07: Client 0: queuing <delProperty device='EQMod Mount' name='TELESCOPE_PARK'>
2016-10-19T12:29:07: Driver indi_eqmod_telescope: read delProperty EQMod Mount TELESCOPE_PARK_POSITION 
2016-10-19T12:29:07: Client 0: queuing <delProperty device='EQMod Mount' name='TELESCOPE_PARK_POSITION'>
2016-10-19T12:29:07: Driver indi_eqmod_telescope: read delProperty EQMod Mount TELESCOPE_PARK_OPTION 
2016-10-19T12:29:07: Client 0: queuing <delProperty device='EQMod Mount' name='TELESCOPE_PARK_OPTION'>
2016-10-19T12:29:07: Driver indi_eqmod_telescope: read delProperty EQMod Mount TELESCOPE_INFO 
2016-10-19T12:29:07: Client 0: queuing <delProperty device='EQMod Mount' name='TELESCOPE_INFO'>
2016-10-19T12:29:07: Driver indi_simulator_ccd: queuing snooped <delProperty device='EQMod Mount' name='TELESCOPE_INFO'>
2016-10-19T12:29:07: Driver indi_eqmod_telescope: read delProperty EQMod Mount USEJOYSTICK 
2016-10-19T12:29:07: Client 0: queuing <delProperty device='EQMod Mount' name='USEJOYSTICK'>
2016-10-19T12:29:07: Driver indi_eqmod_telescope: read delProperty EQMod Mount TELESCOPE_TIMED_GUIDE_NS 
2016-10-19T12:29:07: Client 0: queuing <delProperty device='EQMod Mount' name='TELESCOPE_TIMED_GUIDE_NS'>
2016-10-19T12:29:07: Driver indi_eqmod_telescope: read delProperty EQMod Mount TELESCOPE_TIMED_GUIDE_WE 
2016-10-19T12:29:07: Client 0: queuing <delProperty device='EQMod Mount' name='TELESCOPE_TIMED_GUIDE_WE'>
2016-10-19T12:29:07: Driver indi_eqmod_telescope: read delProperty EQMod Mount GUIDE_RATE 
2016-10-19T12:29:07: Client 0: queuing <delProperty device='EQMod Mount' name='GUIDE_RATE'>
2016-10-19T12:29:07: Driver indi_eqmod_telescope: read delProperty EQMod Mount MOUNTINFORMATION 
2016-10-19T12:29:07: Client 0: queuing <delProperty device='EQMod Mount' name='MOUNTINFORMATION'>
2016-10-19T12:29:07: Driver indi_eqmod_telescope: read delProperty EQMod Mount STEPPERS 
2016-10-19T12:29:07: Client 0: queuing <delProperty device='EQMod Mount' name='STEPPERS'>
2016-10-19T12:29:07: Driver indi_eqmod_telescope: read delProperty EQMod Mount CURRENTSTEPPERS 
2016-10-19T12:29:07: Client 0: queuing <delProperty device='EQMod Mount' name='CURRENTSTEPPERS'>
2016-10-19T12:29:07: Driver indi_eqmod_telescope: read delProperty EQMod Mount PERIODS 
2016-10-19T12:29:07: Client 0: queuing <delProperty device='EQMod Mount' name='PERIODS'>
2016-10-19T12:29:07: Driver indi_eqmod_telescope: read delProperty EQMod Mount JULIAN 
2016-10-19T12:29:07: Client 0: queuing <delProperty device='EQMod Mount' name='JULIAN'>
2016-10-19T12:29:07: Driver indi_eqmod_telescope: read delProperty EQMod Mount TIME_LST 
2016-10-19T12:29:07: Client 0: queuing <delProperty device='EQMod Mount' name='TIME_LST'>
2016-10-19T12:29:07: Driver indi_eqmod_telescope: read delProperty EQMod Mount RASTATUS 
2016-10-19T12:29:07: Client 0: queuing <delProperty device='EQMod Mount' name='RASTATUS'>
2016-10-19T12:29:07: Driver indi_eqmod_telescope: read delProperty EQMod Mount DESTATUS 
2016-10-19T12:29:07: Client 0: queuing <delProperty device='EQMod Mount' name='DESTATUS'>
2016-10-19T12:29:07: Driver indi_eqmod_telescope: read delProperty EQMod Mount SLEWSPEEDS 
2016-10-19T12:29:07: Client 0: queuing <delProperty device='EQMod Mount' name='SLEWSPEEDS'>
2016-10-19T12:29:07: Driver indi_eqmod_telescope: read delProperty EQMod Mount HEMISPHERE 
2016-10-19T12:29:07: Client 0: queuing <delProperty device='EQMod Mount' name='HEMISPHERE'>
2016-10-19T12:29:07: Driver indi_eqmod_telescope: read delProperty EQMod Mount TELESCOPE_TRACK_RATE 
2016-10-19T12:29:07: Client 0: queuing <delProperty device='EQMod Mount' name='TELESCOPE_TRACK_RATE'>
2016-10-19T12:29:07: Driver indi_eqmod_telescope: read delProperty EQMod Mount TRACKRATES 
2016-10-19T12:29:07: Client 0: queuing <delProperty device='EQMod Mount' name='TRACKRATES'>
2016-10-19T12:29:07: Driver indi_eqmod_telescope: read delProperty EQMod Mount HORIZONTAL_COORD 
2016-10-19T12:29:07: Client 0: queuing <delProperty device='EQMod Mount' name='HORIZONTAL_COORD'>
2016-10-19T12:29:07: Driver indi_eqmod_telescope: read delProperty EQMod Mount TELESCOPE_PIER_SIDE 
2016-10-19T12:29:07: Client 0: queuing <delProperty device='EQMod Mount' name='TELESCOPE_PIER_SIDE'>
2016-10-19T12:29:07: Driver indi_eqmod_telescope: read delProperty EQMod Mount REVERSEDEC 
2016-10-19T12:29:07: Client 0: queuing <delProperty device='EQMod Mount' name='REVERSEDEC'>
2016-10-19T12:29:07: Driver indi_eqmod_telescope: read delProperty EQMod Mount STANDARDSYNC 
2016-10-19T12:29:07: Client 0: queuing <delProperty device='EQMod Mount' name='STANDARDSYNC'>
2016-10-19T12:29:07: Driver indi_eqmod_telescope: read delProperty EQMod Mount STANDARDSYNCPOINT 
2016-10-19T12:29:07: Client 0: queuing <delProperty device='EQMod Mount' name='STANDARDSYNCPOINT'>
2016-10-19T12:29:07: Driver indi_eqmod_telescope: read delProperty EQMod Mount SYNCPOLARALIGN 
2016-10-19T12:29:07: Client 0: queuing <delProperty device='EQMod Mount' name='SYNCPOLARALIGN'>
2016-10-19T12:29:07: Driver indi_eqmod_telescope: read delProperty EQMod Mount SYNCMANAGE 
2016-10-19T12:29:07: Client 0: queuing <delProperty device='EQMod Mount' name='SYNCMANAGE'>
2016-10-19T12:29:07: Driver indi_eqmod_telescope: read delProperty EQMod Mount TRACKDEFAULT 
2016-10-19T12:29:07: Client 0: queuing <delProperty device='EQMod Mount' name='TRACKDEFAULT'>
2016-10-19T12:29:07: Driver indi_eqmod_telescope: read delProperty EQMod Mount BACKLASH 
2016-10-19T12:29:07: Client 0: queuing <delProperty device='EQMod Mount' name='BACKLASH'>
2016-10-19T12:29:07: Driver indi_eqmod_telescope: read delProperty EQMod Mount USEBACKLASH 
2016-10-19T12:29:07: Client 0: queuing <delProperty device='EQMod Mount' name='USEBACKLASH'>
2016-10-19T12:29:07: Driver indi_eqmod_telescope: read delProperty EQMod Mount ALIGN_METHOD 
2016-10-19T12:29:07: Client 0: queuing <delProperty device='EQMod Mount' name='ALIGN_METHOD'>
2016-10-19T12:29:07: Driver indi_eqmod_telescope: read delProperty EQMod Mount ALIGNSYNCMODE 
2016-10-19T12:29:07: Client 0: queuing <delProperty device='EQMod Mount' name='ALIGNSYNCMODE'>
2016-10-19T12:29:07: Driver indi_eqmod_telescope: read delProperty EQMod Mount ALIGNDATA 
2016-10-19T12:29:07: Client 0: queuing <delProperty device='EQMod Mount' name='ALIGNDATA'>
2016-10-19T12:29:07: Driver indi_eqmod_telescope: read delProperty EQMod Mount ALIGNPOINT 
2016-10-19T12:29:07: Client 0: queuing <delProperty device='EQMod Mount' name='ALIGNPOINT'>
2016-10-19T12:29:07: Driver indi_eqmod_telescope: read delProperty EQMod Mount ALIGNLIST 
2016-10-19T12:29:07: Client 0: queuing <delProperty device='EQMod Mount' name='ALIGNLIST'>
2016-10-19T12:29:07: Driver indi_eqmod_telescope: read delProperty EQMod Mount ALIGNTELESCOPECOORDS 
2016-10-19T12:29:07: Client 0: queuing <delProperty device='EQMod Mount' name='ALIGNTELESCOPECOORDS'>
2016-10-19T12:29:07: Driver indi_eqmod_telescope: read delProperty EQMod Mount ALIGNCOUNT 
2016-10-19T12:29:07: Client 0: queuing <delProperty device='EQMod Mount' name='ALIGNCOUNT'>
2016-10-19T12:29:07: Driver indi_eqmod_telescope: read delProperty EQMod Mount ALIGNMODE 
2016-10-19T12:29:07: Client 0: queuing <delProperty device='EQMod Mount' name='ALIGNMODE'>
2016-10-19T12:29:07: Driver indi_eqmod_telescope: read delProperty EQMod Mount ALIGNDATAFILE 
2016-10-19T12:29:07: Client 0: queuing <delProperty device='EQMod Mount' name='ALIGNDATAFILE'>
2016-10-19T12:29:07: Driver indi_eqmod_telescope: read delProperty EQMod Mount HORIZONLIMITSDATAFILE 
2016-10-19T12:29:07: Client 0: queuing <delProperty device='EQMod Mount' name='HORIZONLIMITSDATAFILE'>
2016-10-19T12:29:07: Driver indi_eqmod_telescope: read delProperty EQMod Mount HORIZONLIMITSDATAFITS 
2016-10-19T12:29:07: Client 0: queuing <delProperty device='EQMod Mount' name='HORIZONLIMITSDATAFITS'>
2016-10-19T12:29:07: Driver indi_eqmod_telescope: read delProperty EQMod Mount HORIZONLIMITSPOINT 
2016-10-19T12:29:07: Client 0: queuing <delProperty device='EQMod Mount' name='HORIZONLIMITSPOINT'>
2016-10-19T12:29:07: Driver indi_eqmod_telescope: read delProperty EQMod Mount HORIZONLIMITSTRAVERSE 
2016-10-19T12:29:07: Client 0: queuing <delProperty device='EQMod Mount' name='HORIZONLIMITSTRAVERSE'>
2016-10-19T12:29:07: Driver indi_eqmod_telescope: read delProperty EQMod Mount HORIZONLIMITSMANAGE 
2016-10-19T12:29:07: Client 0: queuing <delProperty device='EQMod Mount' name='HORIZONLIMITSMANAGE'>
2016-10-19T12:29:07: Driver indi_eqmod_telescope: read delProperty EQMod Mount HORIZONLIMITSFILEOPERATION 
2016-10-19T12:29:07: Client 0: queuing <delProperty device='EQMod Mount' name='HORIZONLIMITSFILEOPERATION'>
2016-10-19T12:29:07: Driver indi_eqmod_telescope: read delProperty EQMod Mount HORIZONLIMITSONLIMIT 
2016-10-19T12:29:07: Client 0: queuing <delProperty device='EQMod Mount' name='HORIZONLIMITSONLIMIT'>
2016-10-19T12:29:07: Driver indi_eqmod_telescope: read delProperty EQMod Mount HORIZONLIMITSLIMITGOTO 
2016-10-19T12:29:07: Client 0: queuing <delProperty device='EQMod Mount' name='HORIZONLIMITSLIMITGOTO'>
2016-10-19T12:29:07: Client 0: sending msg copy 1 nq 85:
<delProperty device="CCD Simulator" name="CCD_BINNING" timestamp="2016-10-19T12:29:07"/>

2016-10-19T12:29:07: Driver indi_simulator_ccd: sending msg copy 2 nq 2:
<delProperty device="EQMod Mount" name="EQUATORIAL_EOD_COORD" timestamp="2016-10-19T12:29:07"/>

2016-10-19T12:29:07: Client 0: sending msg copy 1 nq 84:
<delProperty device="CCD Simulator" name="CCD_EXPOSURE" timestamp="2016-10-19T12:29:07"/>

2016-10-19T12:29:07: Driver indi_simulator_ccd: sending msg copy 2 nq 1:
<delProperty device="EQMod Mount" name="TELESCOPE_INFO" timestamp="2016-10-19T12:29:07"/>

2016-10-19T12:29:07: Client 0: sending msg copy 1 nq 83:
<delProperty device="CCD Simulator" name="CCD_ABORT_EXPOSURE" timestamp="2016-10-19T12:29:07"/>

2016-10-19T12:29:07: Client 0: sending msg copy 1 nq 82:
<delProperty device="CCD Simulator" name="CCD1" timestamp="2016-10-19T12:29:07"/>

2016-10-19T12:29:07: Client 0: sending msg copy 1 nq 81:
<delProperty device="CCD Simulator" name="CCD_COMPRESSION" timestamp="2016-10-19T12:29:07"/>

2016-10-19T12:29:07: Client 0: sending msg copy 1 nq 80:
<delProperty device="CCD Simulator" name="CCD_RAPID_GUIDE" timestamp="2016-10-19T12:29:07"/>

2016-10-19T12:29:07: Client 0: sending msg copy 1 nq 79:
<delProperty device="CCD Simulator" name="GUIDER_EXPOSURE" timestamp="2016-10-19T12:29:07"/>

2016-10-19T12:29:07: Client 0: sending msg copy 1 nq 78:
<delProperty device="CCD Simulator" name="GUIDER_ABORT_EXPOSURE" timestamp="2016-10-19T12:29:07"/>

2016-10-19T12:29:07: Client 0: sending msg copy 1 nq 77:
<delProperty device="CCD Simulator" name="GUIDER_FRAME" timestamp="2016-10-19T12:29:07"/>

2016-10-19T12:29:07: Client 0: sending msg copy 1 nq 76:
<delProperty device="CCD Simulator" name="GUIDER_INFO" timestamp="2016-10-19T12:29:07"/>

2016-10-19T12:29:07: Client 0: sending msg copy 1 nq 75:
<delProperty device="CCD Simulator" name="CCD2" timestamp="2016-10-19T12:29:07"/>

2016-10-19T12:29:07: Client 0: sending msg copy 1 nq 74:
<delProperty device="CCD Simulator" name="GUIDER_BINNING" timestamp="2016-10-19T12:29:07"/>

2016-10-19T12:29:07: Client 0: sending msg copy 1 nq 73:
<delProperty device="CCD Simulator" name="GUIDER_COMPRESSION" timestamp="2016-10-19T12:29:07"/>

2016-10-19T12:29:07: Client 0: sending msg copy 1 nq 72:
<delProperty device="CCD Simulator" name="GUIDER_FRAME_TYPE" timestamp="2016-10-19T12:29:07"/>

2016-10-19T12:29:07: Client 0: sending msg copy 1 nq 71:
<delProperty device="CCD Simulator" name="GUIDER_RAPID_GUIDE" timestamp="2016-10-19T12:29:07"/>

2016-10-19T12:29:07: Client 0: sending msg copy 1 nq 70:
<delProperty device="CCD Simulator" name="CCD_TEMPERATURE" timestamp="2016-10-19T12:29:07"/>

2016-10-19T12:29:07: Client 0: sending msg copy 1 nq 69:
<delProperty device="CCD Simulator" name="TELESCOPE_TIMED_GUIDE_NS" timestamp="2016-10-19T12:29:07"/>

2016-10-19T12:29:07: Client 0: sending msg copy 1 nq 68:
<delProperty device="CCD Simulator" name="TELESCOPE_TIMED_GUIDE_WE" timestamp="2016-10-19T12:29:07"/>

2016-10-19T12:29:07: Client 0: sending msg copy 1 nq 67:
<delProperty device="CCD Simulator" name="CCD_FRAME_TYPE" timestamp="2016-10-19T12:29:07"/>

2016-10-19T12:29:07: Client 0: sending msg copy 1 nq 66:
<delProperty device="CCD Simulator" name="CCD_FRAME_RESET" timestamp="2016-10-19T12:29:07"/>

2016-10-19T12:29:07: Client 0: sending msg copy 1 nq 65:
<delProperty device="CCD Simulator" name="ASTROMETRY_SOLVER" timestamp="2016-10-19T12:29:07"/>

2016-10-19T12:29:07: Client 0: sending msg copy 1 nq 64:
<delProperty device="CCD Simulator" name="ASTROMETRY_SETTINGS" timestamp="2016-10-19T12:29:07"/>

2016-10-19T12:29:07: Client 0: sending msg copy 1 nq 63:
<delProperty device="CCD Simulator" name="WCS_CONTROL" timestamp="2016-10-19T12:29:07"/>

2016-10-19T12:29:07: Client 0: sending msg copy 1 nq 62:
<delProperty device="CCD Simulator" name="UPLOAD_MODE" timestamp="2016-10-19T12:29:07"/>

2016-10-19T12:29:07: Client 0: sending msg copy 1 nq 61:
<delProperty device="CCD Simulator" name="UPLOAD_SETTINGS" timestamp="2016-10-19T12:29:07"/>

2016-10-19T12:29:07: Client 0: sending msg copy 1 nq 60:
<delProperty device="CCD Simulator" name="CCD_COOLER" timestamp="2016-10-19T12:29:07"/>

2016-10-19T12:29:07: Client 0: sending msg copy 1 nq 59:
<delProperty device="CCD Simulator" name="FILTER_SLOT" timestamp="2016-10-19T12:29:07"/>

2016-10-19T12:29:07: Client 0: sending msg copy 1 nq 58:
<delProperty device="CCD Simulator" name="FILTER_NAME" timestamp="2016-10-19T12:29:07"/>

2016-10-19T12:29:07: Client 0: sending msg copy 1 nq 57:
<message device="EQMod Mount" timestamp="2016-10-19T12:29:07" message="Disconnected from EQMod Mount."/>

2016-10-19T12:29:07: Client 0: sending msg copy 1 nq 56:
<setSwitchVector device="EQMod Mount" name="CONNECTION" state="Idle" timeout="60" timestamp="2016-10-19T12:29:07">
    <oneSwitch name="CONNECT">
Off
    </oneSwitch>
    <oneSwitch name="DISCONNECT">
On
    </oneSwitch>
</setSwitchVector>

2016-10-19T12:29:07: Client 0: sending msg copy 1 nq 55:
<delProperty device="EQMod Mount" name="ON_COORD_SET" timestamp="2016-10-19T12:29:07"/>

2016-10-19T12:29:07: Client 0: sending msg copy 1 nq 54:
<delProperty device="EQMod Mount" name="EQUATORIAL_EOD_COORD" timestamp="2016-10-19T12:29:07"/>

2016-10-19T12:29:07: Client 0: sending msg copy 1 nq 53:
<delProperty device="EQMod Mount" name="TELESCOPE_ABORT_MOTION" timestamp="2016-10-19T12:29:07"/>

2016-10-19T12:29:07: Client 0: sending msg copy 1 nq 52:
<delProperty device="EQMod Mount" name="TELESCOPE_MOTION_NS" timestamp="2016-10-19T12:29:07"/>

2016-10-19T12:29:07: Client 0: sending msg copy 1 nq 51:
<delProperty device="EQMod Mount" name="TELESCOPE_MOTION_WE" timestamp="2016-10-19T12:29:07"/>

2016-10-19T12:29:07: Client 0: sending msg copy 1 nq 50:
<delProperty device="EQMod Mount" name="TELESCOPE_SLEW_RATE" timestamp="2016-10-19T12:29:07"/>

2016-10-19T12:29:07: Client 0: sending msg copy 1 nq 49:
<delProperty device="EQMod Mount" name="TIME_UTC" timestamp="2016-10-19T12:29:07"/>

2016-10-19T12:29:07: Client 0: sending msg copy 1 nq 48:
<delProperty device="EQMod Mount" name="GEOGRAPHIC_COORD" timestamp="2016-10-19T12:29:07"/>

2016-10-19T12:29:07: Client 0: sending msg copy 1 nq 47:
<delProperty device="EQMod Mount" name="TELESCOPE_PARK" timestamp="2016-10-19T12:29:07"/>

2016-10-19T12:29:07: Client 0: sending msg copy 1 nq 46:
<delProperty device="EQMod Mount" name="TELESCOPE_PARK_POSITION" timestamp="2016-10-19T12:29:07"/>

2016-10-19T12:29:07: Client 0: sending msg copy 1 nq 45:
<delProperty device="EQMod Mount" name="TELESCOPE_PARK_OPTION" timestamp="2016-10-19T12:29:07"/>

2016-10-19T12:29:07: Client 0: sending msg copy 1 nq 44:
<delProperty device="EQMod Mount" name="TELESCOPE_INFO" timestamp="2016-10-19T12:29:07"/>

2016-10-19T12:29:07: Client 0: sending msg copy 1 nq 43:
<delProperty device="EQMod Mount" name="USEJOYSTICK" timestamp="2016-10-19T12:29:07"/>

2016-10-19T12:29:07: Client 0: sending msg copy 1 nq 42:
<delProperty device="EQMod Mount" name="TELESCOPE_TIMED_GUIDE_NS" timestamp="2016-10-19T12:29:07"/>

2016-10-19T12:29:07: Client 0: sending msg copy 1 nq 41:
<delProperty device="EQMod Mount" name="TELESCOPE_TIMED_GUIDE_WE" timestamp="2016-10-19T12:29:07"/>

2016-10-19T12:29:07: Client 0: sending msg copy 1 nq 40:
<delProperty device="EQMod Mount" name="GUIDE_RATE" timestamp="2016-10-19T12:29:07"/>

2016-10-19T12:29:07: Client 0: sending msg copy 1 nq 39:
<delProperty device="EQMod Mount" name="MOUNTINFORMATION" timestamp="2016-10-19T12:29:07"/>

2016-10-19T12:29:07: Client 0: sending msg copy 1 nq 38:
<delProperty device="EQMod Mount" name="STEPPERS" timestamp="2016-10-19T12:29:07"/>

2016-10-19T12:29:07: Client 0: sending msg copy 1 nq 37:
<delProperty device="EQMod Mount" name="CURRENTSTEPPERS" timestamp="2016-10-19T12:29:07"/>

2016-10-19T12:29:07: Client 0: sending msg copy 1 nq 36:
<delProperty device="EQMod Mount" name="PERIODS" timestamp="2016-10-19T12:29:07"/>

2016-10-19T12:29:07: Client 0: sending msg copy 1 nq 35:
<delProperty device="EQMod Mount" name="JULIAN" timestamp="2016-10-19T12:29:07"/>

2016-10-19T12:29:07: Client 0: sending msg copy 1 nq 34:
<delProperty device="EQMod Mount" name="TIME_LST" timestamp="2016-10-19T12:29:07"/>

2016-10-19T12:29:07: Client 0: sending msg copy 1 nq 33:
<delProperty device="EQMod Mount" name="RASTATUS" timestamp="2016-10-19T12:29:07"/>

2016-10-19T12:29:07: Client 0: sending msg copy 1 nq 32:
<delProperty device="EQMod Mount" name="DESTATUS" timestamp="2016-10-19T12:29:07"/>

2016-10-19T12:29:07: Client 0: sending msg copy 1 nq 31:
<delProperty device="EQMod Mount" name="SLEWSPEEDS" timestamp="2016-10-19T12:29:07"/>

2016-10-19T12:29:07: Client 0: sending msg copy 1 nq 30:
<delProperty device="EQMod Mount" name="HEMISPHERE" timestamp="2016-10-19T12:29:07"/>

2016-10-19T12:29:07: Client 0: sending msg copy 1 nq 29:
<delProperty device="EQMod Mount" name="TELESCOPE_TRACK_RATE" timestamp="2016-10-19T12:29:07"/>

2016-10-19T12:29:07: Client 0: sending msg copy 1 nq 28:
<delProperty device="EQMod Mount" name="TRACKRATES" timestamp="2016-10-19T12:29:07"/>

2016-10-19T12:29:07: Client 0: sending msg copy 1 nq 27:
<delProperty device="EQMod Mount" name="HORIZONTAL_COORD" timestamp="2016-10-19T12:29:07"/>

2016-10-19T12:29:07: Client 0: sending msg copy 1 nq 26:
<delProperty device="EQMod Mount" name="TELESCOPE_PIER_SIDE" timestamp="2016-10-19T12:29:07"/>

2016-10-19T12:29:07: Client 0: sending msg copy 1 nq 25:
<delProperty device="EQMod Mount" name="REVERSEDEC" timestamp="2016-10-19T12:29:07"/>

2016-10-19T12:29:07: Client 0: sending msg copy 1 nq 24:
<delProperty device="EQMod Mount" name="STANDARDSYNC" timestamp="2016-10-19T12:29:07"/>

2016-10-19T12:29:07: Client 0: sending msg copy 1 nq 23:
<delProperty device="EQMod Mount" name="STANDARDSYNCPOINT" timestamp="2016-10-19T12:29:07"/>

2016-10-19T12:29:07: Client 0: sending msg copy 1 nq 22:
<delProperty device="EQMod Mount" name="SYNCPOLARALIGN" timestamp="2016-10-19T12:29:07"/>

2016-10-19T12:29:07: Client 0: sending msg copy 1 nq 21:
<delProperty device="EQMod Mount" name="SYNCMANAGE" timestamp="2016-10-19T12:29:07"/>

2016-10-19T12:29:07: Client 0: sending msg copy 1 nq 20:
<delProperty device="EQMod Mount" name="TRACKDEFAULT" timestamp="2016-10-19T12:29:07"/>

2016-10-19T12:29:07: Client 0: sending msg copy 1 nq 19:
<delProperty device="EQMod Mount" name="BACKLASH" timestamp="2016-10-19T12:29:07"/>

2016-10-19T12:29:07: Client 0: sending msg copy 1 nq 18:
<delProperty device="EQMod Mount" name="USEBACKLASH" timestamp="2016-10-19T12:29:07"/>

2016-10-19T12:29:07: Client 0: sending msg copy 1 nq 17:
<delProperty device="EQMod Mount" name="ALIGN_METHOD" timestamp="2016-10-19T12:29:07"/>

2016-10-19T12:29:07: Client 0: sending msg copy 1 nq 16:
<delProperty device="EQMod Mount" name="ALIGNSYNCMODE" timestamp="2016-10-19T12:29:07"/>

2016-10-19T12:29:07: Client 0: sending msg copy 1 nq 15:
<delProperty device="EQMod Mount" name="ALIGNDATA" timestamp="2016-10-19T12:29:07"/>

2016-10-19T12:29:07: Client 0: sending msg copy 1 nq 14:
<delProperty device="EQMod Mount" name="ALIGNPOINT" timestamp="2016-10-19T12:29:07"/>

2016-10-19T12:29:07: Client 0: sending msg copy 1 nq 13:
<delProperty device="EQMod Mount" name="ALIGNLIST" timestamp="2016-10-19T12:29:07"/>

2016-10-19T12:29:07: Client 0: sending msg copy 1 nq 12:
<delProperty device="EQMod Mount" name="ALIGNTELESCOPECOORDS" timestamp="2016-10-19T12:29:07"/>

2016-10-19T12:29:07: Client 0: sending msg copy 1 nq 11:
<delProperty device="EQMod Mount" name="ALIGNCOUNT" timestamp="2016-10-19T12:29:07"/>

2016-10-19T12:29:07: Client 0: sending msg copy 1 nq 10:
<delProperty device="EQMod Mount" name="ALIGNMODE" timestamp="2016-10-19T12:29:07"/>

2016-10-19T12:29:07: Client 0: sending msg copy 1 nq 9:
<delProperty device="EQMod Mount" name="ALIGNDATAFILE" timestamp="2016-10-19T12:29:07"/>

2016-10-19T12:29:07: Client 0: sending msg copy 1 nq 8:
<delProperty device="EQMod Mount" name="HORIZONLIMITSDATAFILE" timestamp="2016-10-19T12:29:07"/>

2016-10-19T12:29:07: Client 0: sending msg copy 1 nq 7:
<delProperty device="EQMod Mount" name="HORIZONLIMITSDATAFITS" timestamp="2016-10-19T12:29:07"/>

2016-10-19T12:29:07: Client 0: sending msg copy 1 nq 6:
<delProperty device="EQMod Mount" name="HORIZONLIMITSPOINT" timestamp="2016-10-19T12:29:07"/>

2016-10-19T12:29:07: Client 0: sending msg copy 1 nq 5:
<delProperty device="EQMod Mount" name="HORIZONLIMITSTRAVERSE" timestamp="2016-10-19T12:29:07"/>

2016-10-19T12:29:07: Client 0: sending msg copy 1 nq 4:
<delProperty device="EQMod Mount" name="HORIZONLIMITSMANAGE" timestamp="2016-10-19T12:29:07"/>

2016-10-19T12:29:07: Client 0: sending msg copy 1 nq 3:
<delProperty device="EQMod Mount" name="HORIZONLIMITSFILEOPERATION" timestamp="2016-10-19T12:29:07"/>

2016-10-19T12:29:07: Client 0: sending msg copy 1 nq 2:
<delProperty device="EQMod Mount" name="HORIZONLIMITSONLIMIT" timestamp="2016-10-19T12:29:07"/>

2016-10-19T12:29:07: Client 0: sending msg copy 1 nq 1:
<delProperty device="EQMod Mount" name="HORIZONLIMITSLIMITGOTO" timestamp="2016-10-19T12:29:07"/>

2016-10-19T12:29:55: Client 0: read EOF
2016-10-19T12:29:55: Client 0: shut down complete - bye!