FYI, I experimented with INDI for Windows used from Ekos in a Linux VM last night (hadn't thought of doing that before) and the slewing problem is there too.
Read More...
Hi Jasem,
Here are my findings for tonight :
- the plate solve tab now has access to mount position.
- when trying to solve a position, the position gets further and further from the target after each solve (I used astrometry, Ekos seems to confuse and crash ansvr) . Essentially if you have a maximum distance from target set, you'll never get there. A single solve and sync works fine. A conflict between the adapting mount model in Ascom and some internal Ekos model maybe?
- when slewing from a scheduled plan, the slewing is extremely slow. Looking at the Ascom commands, it appears that Ekos doesn't wait for the goto to finish. It sends the same slew order over and over again every second or so. As a result, the mount slew is interrupted every second and starts again. The one slew I tried to several minutes. A slew from kstars works as expected though.
Thanks.
Read More...
Hi Jasem,
I confirm that in builds 171 and later the mount tab can now read the mount's position. Thanks for the fix.
The bad news is that the plate solve tab doesn't seem to be able to.
Thanks.
Read More...
Thanks Jasem. I'm happy to test. I really like the way Ekos works and I'd like to be able to use it with my hardware. It was close last night.
Read More...
Hi Jasem,
Thanks for making changes. I can now connect to my mount via ASCOM.
There is however a next issue: even though the connection screen of Ekos shows the position of the telescope, the telescope tab doesn't seem to be able to get those coordinates. So for example when you slew to a target to get things like this for that reason:
2018-08-27T23:37:56 Job 'NGC 6946' is slewing to target.
2018-08-27T23:37:56 Warning: job 'NGC 6946' found not slewing, restarting.
The mount control window has the same problem.
Thanks.
Read More...
Thanks both very much.
My system is indeed entirely J2000. I find it much easier given that all standard data is in that reference system when comparing back to input data for example.
Read More...
Thanks for your quick answer. I'd really love being able to use Ekos again.
The devices that aren't properly supported are Toupcam cams (guiding and planetary) and QHY183C (I tried to get it working for a long time on a rpi3 but eventually gave up). I also had lots of problems about a year ago with my ZWO ASI120MM when ZWO messed up their drivers but it was eventually sorted.
wINDI log:
2018-08-07 20:01:58.87 LISTENER = INDI 2.2.7.0 X86
2018-08-07 20:01:58.87 LISTENER = Starting server listener loop on 0.0.0.0:7624
2018-08-07 20:03:13.70 LISTENER = Creating protocol handler #0
2018-08-07 20:03:13.79 LISTENER = Creating wrapper for EQMOD.Telescope
2018-08-07 20:03:13.88 LISTENER = Creating wrapper for ASCOM.ASICamera.Camera
2018-08-07 20:03:13.90 LISTENER = Creating wrapper for ASCOM.QHYCCD.Camera
2018-08-07 20:03:13.90 LISTENER = Creating wrapper for ASCOM.HomeMade.Focuser
2018-08-07 20:03:13.90 HANDLER#0 = Starting protocol handler loop
2018-08-07 20:03:13.91 HANDLER#0 > <getProperties version='1.7'/>
2018-08-07 20:03:13.93 HANDLER#0 < <defSwitchVector device="EQMOD Telescope" name="CONNECTION" label="Connection" group="Main Control" state="Idle" perm="rw" rule="OneOfMany" timeout="0" timestamp="2018-08-07T20:03:13.9">
2018-08-07 20:03:13.93 HANDLER#0 < <defSwitch name="CONNECT" label="Connect">Off</defSwitch>
2018-08-07 20:03:13.93 HANDLER#0 < <defSwitch name="DISCONNECT" label="Disconnect">On</defSwitch>
2018-08-07 20:03:13.93 HANDLER#0 < </defSwitchVector>
2018-08-07 20:03:13.95 HANDLER#0 < <defTextVector device="EQMOD Telescope" name="DRIVER_INFO" label="Driver Info" group="Options" state="Idle" perm="ro" timeout="0" timestamp="2018-08-07T20:03:13.9">
2018-08-07 20:03:13.95 HANDLER#0 < <defText name="DRIVER_NAME" label="Name">EQMOD Telescope</defText>
2018-08-07 20:03:13.95 HANDLER#0 < <defText name="DRIVER_EXEC" label="Exec">INDI Server.exe</defText>
2018-08-07 20:03:13.95 HANDLER#0 < <defText name="DRIVER_INTERFACE" label="Interface">1</defText>
2018-08-07 20:03:13.95 HANDLER#0 < <defText name="SERVER" label="Server">INDI Server for Windows ver. 2.2.7.0</defText>
2018-08-07 20:03:13.95 HANDLER#0 < <defText name="SOFTWARE_HOME" label="Home URL">http://www.cloudmakers.eu</defText>
2018-08-07 20:03:13.95 HANDLER#0 < </defTextVector>
2018-08-07 20:03:13.95 HANDLER#0 < <defSwitchVector device="ASCOM ASICamera Camera" name="CONNECTION" label="Connection" group="Main Control" state="Idle" perm="rw" rule="OneOfMany" timeout="0" timestamp="2018-08-07T20:03:13.9">
2018-08-07 20:03:13.95 HANDLER#0 < <defSwitch name="CONNECT" label="Connect">Off</defSwitch>
2018-08-07 20:03:13.95 HANDLER#0 < <defSwitch name="DISCONNECT" label="Disconnect">On</defSwitch>
2018-08-07 20:03:13.95 HANDLER#0 < </defSwitchVector>
2018-08-07 20:03:13.95 HANDLER#0 < <defTextVector device="ASCOM ASICamera Camera" name="DRIVER_INFO" label="Driver Info" group="Options" state="Idle" perm="ro" timeout="0" timestamp="2018-08-07T20:03:13.9">
2018-08-07 20:03:13.95 HANDLER#0 < <defText name="DRIVER_NAME" label="Name">ASCOM ASICamera Camera</defText>
2018-08-07 20:03:13.95 HANDLER#0 < <defText name="DRIVER_EXEC" label="Exec">INDI Server.exe</defText>
2018-08-07 20:03:13.95 HANDLER#0 < <defText name="DRIVER_INTERFACE" label="Interface">2</defText>
2018-08-07 20:03:13.95 HANDLER#0 < <defText name="SERVER" label="Server">INDI Server for Windows ver. 2.2.7.0</defText>
2018-08-07 20:03:13.95 HANDLER#0 < <defText name="SOFTWARE_HOME" label="Home URL">http://www.cloudmakers.eu</defText>
2018-08-07 20:03:13.95 HANDLER#0 < </defTextVector>
2018-08-07 20:03:13.95 HANDLER#0 < <defSwitchVector device="ASCOM QHYCCD Camera" name="CONNECTION" label="Connection" group="Main Control" state="Idle" perm="rw" rule="OneOfMany" timeout="0" timestamp="2018-08-07T20:03:13.9">
2018-08-07 20:03:13.95 HANDLER#0 < <defSwitch name="CONNECT" label="Connect">Off</defSwitch>
2018-08-07 20:03:13.95 HANDLER#0 < <defSwitch name="DISCONNECT" label="Disconnect">On</defSwitch>
2018-08-07 20:03:13.95 HANDLER#0 < </defSwitchVector>
2018-08-07 20:03:13.95 HANDLER#0 < <defTextVector device="ASCOM QHYCCD Camera" name="DRIVER_INFO" label="Driver Info" group="Options" state="Idle" perm="ro" timeout="0" timestamp="2018-08-07T20:03:13.9">
2018-08-07 20:03:13.95 HANDLER#0 < <defText name="DRIVER_NAME" label="Name">ASCOM QHYCCD Camera</defText>
2018-08-07 20:03:13.95 HANDLER#0 < <defText name="DRIVER_EXEC" label="Exec">INDI Server.exe</defText>
2018-08-07 20:03:13.95 HANDLER#0 < <defText name="DRIVER_INTERFACE" label="Interface">2</defText>
2018-08-07 20:03:13.95 HANDLER#0 < <defText name="SERVER" label="Server">INDI Server for Windows ver. 2.2.7.0</defText>
2018-08-07 20:03:13.95 HANDLER#0 < <defText name="SOFTWARE_HOME" label="Home URL">http://www.cloudmakers.eu</defText>
2018-08-07 20:03:13.95 HANDLER#0 < </defTextVector>
2018-08-07 20:03:13.95 HANDLER#0 < <defSwitchVector device="ASCOM HomeMade Focuser" name="CONNECTION" label="Connection" group="Main Control" state="Idle" perm="rw" rule="OneOfMany" timeout="0" timestamp="2018-08-07T20:03:13.9">
2018-08-07 20:03:13.95 HANDLER#0 < <defSwitch name="CONNECT" label="Connect">Off</defSwitch>
2018-08-07 20:03:13.95 HANDLER#0 < <defSwitch name="DISCONNECT" label="Disconnect">On</defSwitch>
2018-08-07 20:03:13.95 HANDLER#0 < </defSwitchVector>
2018-08-07 20:03:13.95 HANDLER#0 < <defTextVector device="ASCOM HomeMade Focuser" name="DRIVER_INFO" label="Driver Info" group="Options" state="Idle" perm="ro" timeout="0" timestamp="2018-08-07T20:03:13.9">
2018-08-07 20:03:13.95 HANDLER#0 < <defText name="DRIVER_NAME" label="Name">ASCOM HomeMade Focuser</defText>
2018-08-07 20:03:13.95 HANDLER#0 < <defText name="DRIVER_EXEC" label="Exec">INDI Server.exe</defText>
2018-08-07 20:03:13.95 HANDLER#0 < <defText name="DRIVER_INTERFACE" label="Interface">8</defText>
2018-08-07 20:03:13.95 HANDLER#0 < <defText name="SERVER" label="Server">INDI Server for Windows ver. 2.2.7.0</defText>
2018-08-07 20:03:13.95 HANDLER#0 < <defText name="SOFTWARE_HOME" label="Home URL">http://www.cloudmakers.eu</defText>
2018-08-07 20:03:13.95 HANDLER#0 < </defTextVector>
2018-08-07 20:03:13.95 HANDLER#0 > <enableBLOB device='EQMOD Telescope'>Also</enableBLOB>
2018-08-07 20:03:14.07 HANDLER#0 > <newSwitchVector
device='EQMOD Telescope'
name='CONNECTION'>
<oneSwitch
name='CONNECT'>
On
</oneSwitch>
</newSwitchVector>
2018-08-07 20:03:17.20 HANDLER#0 < <defSwitchVector device="EQMOD Telescope" name="CONNECTION" label="Connection" group="Main Control" state="Ok" perm="rw" rule="OneOfMany" timeout="0" timestamp="2018-08-07T20:03:17.2">
2018-08-07 20:03:17.20 HANDLER#0 < <defSwitch name="CONNECT" label="Connect">On</defSwitch>
2018-08-07 20:03:17.20 HANDLER#0 < <defSwitch name="DISCONNECT" label="Disconnect">Off</defSwitch>
2018-08-07 20:03:17.20 HANDLER#0 < </defSwitchVector>
2018-08-07 20:03:17.21 HANDLER#0 < <defTextVector device="EQMOD Telescope" name="DRIVER_INFO" label="Driver Info" group="Options" state="Idle" perm="ro" timeout="0" timestamp="2018-08-07T20:03:17.2">
2018-08-07 20:03:17.21 HANDLER#0 < <defText name="DRIVER_NAME" label="Name">EQMOD Telescope</defText>
2018-08-07 20:03:17.21 HANDLER#0 < <defText name="DRIVER_EXEC" label="Exec">INDI Server.exe</defText>
2018-08-07 20:03:17.21 HANDLER#0 < <defText name="DRIVER_VERSION" label="Version">1.0</defText>
2018-08-07 20:03:17.21 HANDLER#0 < <defText name="DRIVER_INTERFACE" label="Interface">1</defText>
2018-08-07 20:03:17.21 HANDLER#0 < <defText name="SERVER" label="Server">INDI Server for Windows ver. 2.2.7.0</defText>
2018-08-07 20:03:17.21 HANDLER#0 < <defText name="SOFTWARE_HOME" label="Home URL">http://www.cloudmakers.eu</defText>
2018-08-07 20:03:17.21 HANDLER#0 < </defTextVector>
2018-08-07 20:03:17.27 HANDLER#0 < <defNumberVector device="EQMOD Telescope" name="EQUATORIAL_COORD" label="Equatorial coordinates" group="Main Control" state="Ok" perm="rw" timeout="0" timestamp="2018-08-07T20:03:17.2">
2018-08-07 20:03:17.27 HANDLER#0 < <defNumber name="RA" label="RA" format="%11.9m" min="0" max="24" step="0">3.18501762545827</defNumber>
2018-08-07 20:03:17.27 HANDLER#0 < <defNumber name="DEC" label="Dec" format="%11.9m" min="-180" max="180" step="0">0</defNumber>
2018-08-07 20:03:17.27 HANDLER#0 < </defNumberVector>
2018-08-07 20:03:17.32 HANDLER#0 < <defNumberVector device="EQMOD Telescope" name="EQUATORIAL_COORD" label="Equatorial coordinates" group="Main Control" state="Ok" perm="rw" timeout="0" timestamp="2018-08-07T20:03:17.3">
2018-08-07 20:03:17.32 HANDLER#0 < <defNumber name="RA" label="RA" format="%11.9m" min="0" max="24" step="0">9.0382916389071</defNumber>
2018-08-07 20:03:17.32 HANDLER#0 < <defNumber name="DEC" label="Dec" format="%11.9m" min="-180" max="180" step="0">9.68165948275862</defNumber>
2018-08-07 20:03:17.32 HANDLER#0 < </defNumberVector>
2018-08-07 20:03:17.37 HANDLER#0 < <defNumberVector device="EQMOD Telescope" name="TELESCOPE_MOTION_RATE" label="Telescope motion rate" group="Motion Control" state="Ok" perm="rw" timeout="0" timestamp="2018-08-07T20:03:17.3">
2018-08-07 20:03:17.37 HANDLER#0 < <defNumber name="MOTION_RATE" label="Motion rate" format="%5.1f" min="0" max="200.54756" step="0">200.54756</defNumber>
2018-08-07 20:03:17.37 HANDLER#0 < </defNumberVector>
2018-08-07 20:03:17.37 HANDLER#0 < <defSwitchVector device="EQMOD Telescope" name="TELESCOPE_MOTION_NS" label="Move telescope north/south" group="Motion Control" state="Ok" perm="rw" rule="AtMostOne" timeout="0" timestamp="2018-08-07T20:03:17.3">
2018-08-07 20:03:17.37 HANDLER#0 < <defSwitch name="MOTION_NORTH" label="North">Off</defSwitch>
2018-08-07 20:03:17.37 HANDLER#0 < <defSwitch name="MOTION_SOUTH" label="South">Off</defSwitch>
2018-08-07 20:03:17.37 HANDLER#0 < </defSwitchVector>
2018-08-07 20:03:17.37 HANDLER#0 < <defSwitchVector device="EQMOD Telescope" name="TELESCOPE_MOTION_WE" label="Move telescope west/east" group="Motion Control" state="Ok" perm="rw" rule="AtMostOne" timeout="0" timestamp="2018-08-07T20:03:17.3">
2018-08-07 20:03:17.37 HANDLER#0 < <defSwitch name="MOTION_WEST" label="West">Off</defSwitch>
2018-08-07 20:03:17.37 HANDLER#0 < <defSwitch name="MOTION_EAST" label="East">Off</defSwitch>
2018-08-07 20:03:17.37 HANDLER#0 < </defSwitchVector>
2018-08-07 20:03:17.37 HANDLER#0 < <defSwitchVector device="EQMOD Telescope" name="TELESCOPE_ABORT_MOTION" label="Abort Motion" group="Main Control" state="Ok" perm="rw" rule="AtMostOne" timeout="0" timestamp="2018-08-07T20:03:17.3">
2018-08-07 20:03:17.37 HANDLER#0 < <defSwitch name="ABORT_MOTION" label="Stop">Off</defSwitch>
2018-08-07 20:03:17.37 HANDLER#0 < </defSwitchVector>
2018-08-07 20:03:17.37 HANDLER#0 < <defSwitchVector device="EQMOD Telescope" name="ON_COORD_SET" label="On Set Action" group="Main Control" state="Ok" perm="rw" rule="OneOfMany" timeout="0" timestamp="2018-08-07T20:03:17.3">
2018-08-07 20:03:17.37 HANDLER#0 < <defSwitch name="SLEW" label="Slew">Off</defSwitch>
2018-08-07 20:03:17.37 HANDLER#0 < <defSwitch name="TRACK" label="Track">On</defSwitch>
2018-08-07 20:03:17.37 HANDLER#0 < <defSwitch name="SYNC" label="Sync">Off</defSwitch>
2018-08-07 20:03:17.37 HANDLER#0 < </defSwitchVector>
2018-08-07 20:03:17.37 HANDLER#0 < <defSwitchVector device="EQMOD Telescope" name="TELESCOPE_PARK" label="Park the telescope to HOME position" group="Main Control" state="Ok" perm="rw" rule="AtMostOne" timeout="60" timestamp="2018-08-07T20:03:17.3">
2018-08-07 20:03:17.37 HANDLER#0 < <defSwitch name="PARK" label="Park">On</defSwitch>
2018-08-07 20:03:17.37 HANDLER#0 < <defSwitch name="UNPARK" label="Unpark">Off</defSwitch>
2018-08-07 20:03:17.37 HANDLER#0 < </defSwitchVector>
2018-08-07 20:03:17.37 HANDLER#0 < <defNumberVector device="EQMOD Telescope" name="GEOGRAPHIC_COORD" label="Site coordinates" group="Info" state="Idle" perm="rw" timeout="0" timestamp="2018-08-07T20:03:17.3">
2018-08-07 20:03:17.37 HANDLER#0 < <defNumber name="LAT" label="Latitude" format="%9.6m" min="-90" max="90" step="0">45.8919444444444</defNumber>
2018-08-07 20:03:17.37 HANDLER#0 < <defNumber name="LONG" label="Longitude" format="%9.6m" min="0" max="360" step="0">359.776944444444</defNumber>
2018-08-07 20:03:17.37 HANDLER#0 < <defNumber name="ELEVATION" label="Elevation" format="%5.0f" min="-300" max="10000" step="0">100</defNumber>
2018-08-07 20:03:17.37 HANDLER#0 < </defNumberVector>
2018-08-07 20:03:17.37 HANDLER#0 < <defNumberVector device="EQMOD Telescope" name="TELESCOPE_TIMED_GUIDE_NS" label="Timed pulse guide in N/S" group="Guide" state="Idle" perm="rw" timeout="0" timestamp="2018-08-07T20:03:17.3">
2018-08-07 20:03:17.37 HANDLER#0 < <defNumber name="TIMED_GUIDE_N" label="Guide the scope north" format="%g" min="0" max="5000" step="0">0</defNumber>
2018-08-07 20:03:17.37 HANDLER#0 < <defNumber name="TIMED_GUIDE_S" label="Guide the scope south" format="%g" min="0" max="5000" step="0">0</defNumber>
2018-08-07 20:03:17.37 HANDLER#0 < </defNumberVector>
2018-08-07 20:03:17.38 HANDLER#0 < <defNumberVector device="EQMOD Telescope" name="TELESCOPE_TIMED_GUIDE_WE" label="Timed pulse guide in W/E" group="Guide" state="Idle" perm="rw" timeout="0" timestamp="2018-08-07T20:03:17.3">
2018-08-07 20:03:17.38 HANDLER#0 < <defNumber name="TIMED_GUIDE_W" label="Guide the scope north" format="%g" min="0" max="5000" step="0">0</defNumber>
2018-08-07 20:03:17.38 HANDLER#0 < <defNumber name="TIMED_GUIDE_E" label="Guide the scope south" format="%g" min="0" max="5000" step="0">0</defNumber>
2018-08-07 20:03:17.38 HANDLER#0 < </defNumberVector>
2018-08-07 20:03:17.38 HANDLER#0 < <setSwitchVector device="EQMOD Telescope" name="CONNECTION" state="Ok" timeout="0" timestamp="2018-08-07T20:03:17.3" message="Connected...">
2018-08-07 20:03:17.38 HANDLER#0 < <oneSwitch name="CONNECT">On</oneSwitch>
2018-08-07 20:03:17.38 HANDLER#0 < <oneSwitch name="DISCONNECT">Off</oneSwitch>
2018-08-07 20:03:17.38 HANDLER#0 < </setSwitchVector>
2018-08-07 20:03:17.38 HANDLER#0 > <enableBLOB device='ASCOM ASICamera Camera'>Also</enableBLOB>
2018-08-07 20:03:17.38 HANDLER#0 > <newSwitchVector
device='ASCOM ASICamera Camera'
name='CONNECTION'>
<oneSwitch
name='CONNECT'>
On
</oneSwitch>
</newSwitchVector>
2018-08-07 20:03:17.88 DRIVER#0 < <setSwitchVector device="EQMOD Telescope" name="TELESCOPE_PARK" state="Ok" timeout="60" timestamp="2018-08-07T20:03:17.8" message="Parked">
2018-08-07 20:03:17.88 DRIVER#0 < <oneSwitch name="PARK">On</oneSwitch>
2018-08-07 20:03:17.88 DRIVER#0 < <oneSwitch name="UNPARK">Off</oneSwitch>
2018-08-07 20:03:17.88 DRIVER#0 < </setSwitchVector>
2018-08-07 20:03:17.88 DRIVER#0 < <setNumberVector device="EQMOD Telescope" name="EQUATORIAL_COORD" state="Ok" timeout="60" timestamp="2018-08-07T20:03:17.8">
2018-08-07 20:03:17.88 DRIVER#0 < <oneNumber name="RA">9.03844817736217</oneNumber>
2018-08-07 20:03:17.88 DRIVER#0 < <oneNumber name="DEC">9.68165948275862</oneNumber>
2018-08-07 20:03:17.88 DRIVER#0 < </setNumberVector>
2018-08-07 20:03:18.90 DRIVER#0 < <setNumberVector device="EQMOD Telescope" name="EQUATORIAL_COORD" state="Ok" timeout="60" timestamp="2018-08-07T20:03:18.9">
2018-08-07 20:03:18.90 DRIVER#0 < <oneNumber name="RA">9.03873117242905</oneNumber>
2018-08-07 20:03:18.90 DRIVER#0 < <oneNumber name="DEC">9.68165948275862</oneNumber>
2018-08-07 20:03:18.90 DRIVER#0 < </setNumberVector>
2018-08-07 20:03:19.01 HANDLER#0 < <defSwitchVector device="ASCOM ASICamera Camera" name="CONNECTION" label="Connection" group="Main Control" state="Ok" perm="rw" rule="OneOfMany" timeout="0" timestamp="2018-08-07T20:03:19.0">
2018-08-07 20:03:19.01 HANDLER#0 < <defSwitch name="CONNECT" label="Connect">On</defSwitch>
2018-08-07 20:03:19.01 HANDLER#0 < <defSwitch name="DISCONNECT" label="Disconnect">Off</defSwitch>
2018-08-07 20:03:19.01 HANDLER#0 < </defSwitchVector>
2018-08-07 20:03:19.01 HANDLER#0 < <defTextVector device="ASCOM ASICamera Camera" name="DRIVER_INFO" label="Driver Info" group="Options" state="Idle" perm="ro" timeout="0" timestamp="2018-08-07T20:03:19.0">
2018-08-07 20:03:19.01 HANDLER#0 < <defText name="DRIVER_NAME" label="Name">ASCOM ASICamera Camera</defText>
2018-08-07 20:03:19.01 HANDLER#0 < <defText name="DRIVER_EXEC" label="Exec">INDI Server.exe</defText>
2018-08-07 20:03:19.01 HANDLER#0 < <defText name="DRIVER_VERSION" label="Version">6.0</defText>
2018-08-07 20:03:19.01 HANDLER#0 < <defText name="DRIVER_INTERFACE" label="Interface">2</defText>
2018-08-07 20:03:19.01 HANDLER#0 < <defText name="SERVER" label="Server">INDI Server for Windows ver. 2.2.7.0</defText>
2018-08-07 20:03:19.01 HANDLER#0 < <defText name="SOFTWARE_HOME" label="Home URL">http://www.cloudmakers.eu</defText>
2018-08-07 20:03:19.01 HANDLER#0 < </defTextVector>
2018-08-07 20:03:19.01 HANDLER#0 < <defSwitchVector device="ASCOM ASICamera Camera" name="CCD_FRAME_TYPE" label="Frame type" group="Exposure Control" state="Ok" perm="rw" rule="OneOfMany" timeout="0" timestamp="2018-08-07T20:03:19.0">
2018-08-07 20:03:19.01 HANDLER#0 < <defSwitch name="FRAME_LIGHT" label="Take a light frame exposure">On</defSwitch>
2018-08-07 20:03:19.01 HANDLER#0 < <defSwitch name="FRAME_DARK" label="Take a dark frame exposure">Off</defSwitch>
2018-08-07 20:03:19.01 HANDLER#0 < <defSwitch name="FRAME_FLAT" label="Take a flat frame exposure">Off</defSwitch>
2018-08-07 20:03:19.01 HANDLER#0 < <defSwitch name="FRAME_BIAS" label="Take a bias frame exposure">Off</defSwitch>
2018-08-07 20:03:19.01 HANDLER#0 < </defSwitchVector>
2018-08-07 20:03:19.01 HANDLER#0 < <defNumberVector device="ASCOM ASICamera Camera" name="CCD_EXPOSURE" label="Exposure Time" group="Exposure Control" state="Ok" perm="rw" timeout="0" timestamp="2018-08-07T20:03:19.0">
2018-08-07 20:03:19.01 HANDLER#0 < <defNumber name="CCD_EXPOSURE_VALUE" label="Exposure (s)" format="%5.2f" min="0" max="999000" step="0">0</defNumber>
2018-08-07 20:03:19.01 HANDLER#0 < </defNumberVector>
2018-08-07 20:03:19.01 HANDLER#0 < <defSwitchVector device="ASCOM ASICamera Camera" name="CCD_ABORT_EXPOSURE" label="Abort Exposure" group="Exposure Control" state="Ok" perm="rw" rule="AtMostOne" timeout="0" timestamp="2018-08-07T20:03:19.0">
2018-08-07 20:03:19.01 HANDLER#0 < <defSwitch name="ABORT" label="Abort">Off</defSwitch>
2018-08-07 20:03:19.01 HANDLER#0 < </defSwitchVector>
2018-08-07 20:03:19.01 HANDLER#0 < <defNumberVector device="ASCOM ASICamera Camera" name="CCD_FRAME" label="CCD frame size" group="Setup" state="Idle" perm="rw" timeout="0" timestamp="2018-08-07T20:03:19.0">
2018-08-07 20:03:19.01 HANDLER#0 < <defNumber name="X" label="Left-most pixel position" format="%g" min="0" max="1280" step="0">0</defNumber>
2018-08-07 20:03:19.01 HANDLER#0 < <defNumber name="Y" label="Top-most pixel position" format="%g" min="0" max="960" step="0">0</defNumber>
2018-08-07 20:03:19.01 HANDLER#0 < <defNumber name="WIDTH" label="Frame width in pixels" format="%g" min="0" max="1280" step="0">1280</defNumber>
2018-08-07 20:03:19.01 HANDLER#0 < <defNumber name="HEIGHT" label="Frame height in pixels" format="%g" min="0" max="960" step="0">960</defNumber>
2018-08-07 20:03:19.01 HANDLER#0 < </defNumberVector>
2018-08-07 20:03:19.01 HANDLER#0 < <defNumberVector device="ASCOM ASICamera Camera" name="CCD_BINNING" label="CCD binning" group="Setup" state="Idle" perm="rw" timeout="0" timestamp="2018-08-07T20:03:19.0">
2018-08-07 20:03:19.01 HANDLER#0 < <defNumber name="HOR_BIN" label="Horizontal binning" format="%g" min="0" max="2" step="0">1</defNumber>
2018-08-07 20:03:19.01 HANDLER#0 < <defNumber name="VER_BIN" label="Vertical binning" format="%g" min="0" max="2" step="0">1</defNumber>
2018-08-07 20:03:19.01 HANDLER#0 < </defNumberVector>
2018-08-07 20:03:19.02 HANDLER#0 < <defNumberVector device="ASCOM ASICamera Camera" name="CCD_INFO" label="CCD Info" group="Info" state="Ok" perm="ro" timeout="0" timestamp="2018-08-07T20:03:19.0">
2018-08-07 20:03:19.02 HANDLER#0 < <defNumber name="CCD_PIXEL_SIZE" label="Pixel size" format="%5.2f" min="0" max="0" step="0">3.75</defNumber>
2018-08-07 20:03:19.02 HANDLER#0 < <defNumber name="CCD_PIXEL_SIZE_X" label="Horizontal pixel size" format="%5.2f" min="0" max="0" step="0">3.75</defNumber>
2018-08-07 20:03:19.02 HANDLER#0 < <defNumber name="CCD_PIXEL_SIZE_Y" label="Vertical pixel size" format="%5.2f" min="0" max="0" step="0">3.75</defNumber>
2018-08-07 20:03:19.02 HANDLER#0 < <defNumber name="FULL_WELL_CAPACITY" label="Full well capacity" format="%5.2f" min="0" max="0" step="0">30000000</defNumber>
2018-08-07 20:03:19.02 HANDLER#0 < <defNumber name="ELECTRONS_PER_ADU" label="Photoelectrons per A/D unit" format="%5.2f" min="0" max="0" step="0">30000000</defNumber>
2018-08-07 20:03:19.02 HANDLER#0 < </defNumberVector>
2018-08-07 20:03:19.02 HANDLER#0 < <defBLOBVector device="ASCOM ASICamera Camera" name="CCD1" label="Image" group="Image" state="Ok" perm="ro" timeout="0" timestamp="2018-08-07T20:03:19.0">
2018-08-07 20:03:19.02 HANDLER#0 < <defBLOB name="CCD1" label="Image"/>
2018-08-07 20:03:19.02 HANDLER#0 < </defBLOBVector>
2018-08-07 20:03:19.02 HANDLER#0 < <defSwitchVector device="ASCOM ASICamera Camera" name="UPLOAD_MODE" label="Upload Mode" group="Setup" state="Idle" perm="rw" rule="OneOfMany" timeout="0" timestamp="2018-08-07T20:03:19.0">
2018-08-07 20:03:19.02 HANDLER#0 < <defSwitch name="UPLOAD_CLIENT" label="Client">On</defSwitch>
2018-08-07 20:03:19.02 HANDLER#0 < <defSwitch name="UPLOAD_LOCAL" label="Local">Off</defSwitch>
2018-08-07 20:03:19.02 HANDLER#0 < <defSwitch name="UPLOAD_BOTH" label="Both">Off</defSwitch>
2018-08-07 20:03:19.02 HANDLER#0 < </defSwitchVector>
2018-08-07 20:03:19.02 HANDLER#0 < <defTextVector device="ASCOM ASICamera Camera" name="UPLOAD_SETTINGS" label="Upload settings" group="Setup" state="Idle" perm="rw" timeout="0" timestamp="2018-08-07T20:03:19.0">
2018-08-07 20:03:19.02 HANDLER#0 < <defText name="UPLOAD_DIR" label="Dir"></defText>
2018-08-07 20:03:19.02 HANDLER#0 < <defText name="UPLOAD_PREFIX" label="Prefix">IMAGE_XXX</defText>
2018-08-07 20:03:19.02 HANDLER#0 < </defTextVector>
2018-08-07 20:03:19.02 HANDLER#0 < <defNumberVector device="ASCOM ASICamera Camera" name="TELESCOPE_TIMED_GUIDE_NS" label="Timed pulse guide in N/S" group="Guide" state="Idle" perm="rw" timeout="0" timestamp="2018-08-07T20:03:19.0">
2018-08-07 20:03:19.02 HANDLER#0 < <defNumber name="TIMED_GUIDE_N" label="Guide the scope north" format="%g" min="0" max="5000" step="0">0</defNumber>
2018-08-07 20:03:19.02 HANDLER#0 < <defNumber name="TIMED_GUIDE_S" label="Guide the scope south" format="%g" min="0" max="5000" step="0">0</defNumber>
2018-08-07 20:03:19.02 HANDLER#0 < </defNumberVector>
2018-08-07 20:03:19.02 HANDLER#0 < <defNumberVector device="ASCOM ASICamera Camera" name="TELESCOPE_TIMED_GUIDE_WE" label="Timed pulse guide in W/E" group="Guide" state="Idle" perm="rw" timeout="0" timestamp="2018-08-07T20:03:19.0">
2018-08-07 20:03:19.02 HANDLER#0 < <defNumber name="TIMED_GUIDE_W" label="Guide the scope north" format="%g" min="0" max="5000" step="0">0</defNumber>
2018-08-07 20:03:19.02 HANDLER#0 < <defNumber name="TIMED_GUIDE_E" label="Guide the scope south" format="%g" min="0" max="5000" step="0">0</defNumber>
2018-08-07 20:03:19.02 HANDLER#0 < </defNumberVector>
2018-08-07 20:03:19.02 HANDLER#0 < <setSwitchVector device="ASCOM ASICamera Camera" name="CONNECTION" state="Ok" timeout="0" timestamp="2018-08-07T20:03:19.0" message="Connected...">
2018-08-07 20:03:19.02 HANDLER#0 < <oneSwitch name="CONNECT">On</oneSwitch>
2018-08-07 20:03:19.02 HANDLER#0 < <oneSwitch name="DISCONNECT">Off</oneSwitch>
2018-08-07 20:03:19.02 HANDLER#0 < </setSwitchVector>
2018-08-07 20:03:19.02 HANDLER#0 > <enableBLOB device='ASCOM QHYCCD Camera'>Also</enableBLOB>
2018-08-07 20:03:19.02 HANDLER#0 > <newSwitchVector
device='ASCOM QHYCCD Camera'
name='CONNECTION'>
<oneSwitch
name='CONNECT'>
On
</oneSwitch>
</newSwitchVector>
2018-08-07 20:03:19.91 DRIVER#0 < <setNumberVector device="EQMOD Telescope" name="EQUATORIAL_COORD" state="Ok" timeout="60" timestamp="2018-08-07T20:03:19.9">
2018-08-07 20:03:19.91 DRIVER#0 < <oneNumber name="RA">9.03901416749594</oneNumber>
2018-08-07 20:03:19.91 DRIVER#0 < <oneNumber name="DEC">9.68165948275862</oneNumber>
2018-08-07 20:03:19.91 DRIVER#0 < </setNumberVector>
2018-08-07 20:03:19.99 HANDLER#0 < <defSwitchVector device="ASCOM QHYCCD Camera" name="CONNECTION" label="Connection" group="Main Control" state="Ok" perm="rw" rule="OneOfMany" timeout="0" timestamp="2018-08-07T20:03:19.9">
2018-08-07 20:03:19.99 HANDLER#0 < <defSwitch name="CONNECT" label="Connect">On</defSwitch>
2018-08-07 20:03:19.99 HANDLER#0 < <defSwitch name="DISCONNECT" label="Disconnect">Off</defSwitch>
2018-08-07 20:03:19.99 HANDLER#0 < </defSwitchVector>
2018-08-07 20:03:20.01 HANDLER#0 < <defTextVector device="ASCOM QHYCCD Camera" name="DRIVER_INFO" label="Driver Info" group="Options" state="Idle" perm="ro" timeout="0" timestamp="2018-08-07T20:03:19.9">
2018-08-07 20:03:20.01 HANDLER#0 < <defText name="DRIVER_NAME" label="Name">ASCOM QHYCCD Camera</defText>
2018-08-07 20:03:20.01 HANDLER#0 < <defText name="DRIVER_EXEC" label="Exec">INDI Server.exe</defText>
2018-08-07 20:03:20.01 HANDLER#0 < <defText name="DRIVER_VERSION" label="Version">0.1</defText>
2018-08-07 20:03:20.01 HANDLER#0 < <defText name="DRIVER_INTERFACE" label="Interface">2</defText>
2018-08-07 20:03:20.01 HANDLER#0 < <defText name="SERVER" label="Server">INDI Server for Windows ver. 2.2.7.0</defText>
2018-08-07 20:03:20.01 HANDLER#0 < <defText name="SOFTWARE_HOME" label="Home URL">http://www.cloudmakers.eu</defText>
2018-08-07 20:03:20.01 HANDLER#0 < </defTextVector>
2018-08-07 20:03:20.01 HANDLER#0 < <defSwitchVector device="ASCOM QHYCCD Camera" name="CCD_FRAME_TYPE" label="Frame type" group="Exposure Control" state="Ok" perm="rw" rule="OneOfMany" timeout="0" timestamp="2018-08-07T20:03:20.0">
2018-08-07 20:03:20.01 HANDLER#0 < <defSwitch name="FRAME_LIGHT" label="Take a light frame exposure">On</defSwitch>
2018-08-07 20:03:20.01 HANDLER#0 < <defSwitch name="FRAME_DARK" label="Take a dark frame exposure">Off</defSwitch>
2018-08-07 20:03:20.01 HANDLER#0 < <defSwitch name="FRAME_FLAT" label="Take a flat frame exposure">Off</defSwitch>
2018-08-07 20:03:20.01 HANDLER#0 < <defSwitch name="FRAME_BIAS" label="Take a bias frame exposure">Off</defSwitch>
2018-08-07 20:03:20.01 HANDLER#0 < </defSwitchVector>
2018-08-07 20:03:20.01 HANDLER#0 < <defNumberVector device="ASCOM QHYCCD Camera" name="CCD_EXPOSURE" label="Exposure Time" group="Exposure Control" state="Ok" perm="rw" timeout="0" timestamp="2018-08-07T20:03:20.0">
2018-08-07 20:03:20.01 HANDLER#0 < <defNumber name="CCD_EXPOSURE_VALUE" label="Exposure (s)" format="%5.2f" min="0.001" max="3600" step="0">0</defNumber>
2018-08-07 20:03:20.01 HANDLER#0 < </defNumberVector>
2018-08-07 20:03:20.01 HANDLER#0 < <defSwitchVector device="ASCOM QHYCCD Camera" name="CCD_ABORT_EXPOSURE" label="Abort Exposure" group="Exposure Control" state="Ok" perm="rw" rule="AtMostOne" timeout="0" timestamp="2018-08-07T20:03:20.0">
2018-08-07 20:03:20.01 HANDLER#0 < <defSwitch name="ABORT" label="Abort">Off</defSwitch>
2018-08-07 20:03:20.01 HANDLER#0 < </defSwitchVector>
2018-08-07 20:03:20.01 HANDLER#0 < <defNumberVector device="ASCOM QHYCCD Camera" name="CCD_TEMPERATURE" label="CCD Temperature" group="Setup" state="Ok" perm="rw" timeout="60" timestamp="2018-08-07T20:03:20.0">
2018-08-07 20:03:20.01 HANDLER#0 < <defNumber name="CCD_TEMPERATURE_VALUE" label="CCD Temperature" format="%5.2f" min="-100" max="20" step="5">25</defNumber>
2018-08-07 20:03:20.01 HANDLER#0 < </defNumberVector>
2018-08-07 20:03:20.01 HANDLER#0 < <defNumberVector device="ASCOM QHYCCD Camera" name="CCD_FRAME" label="CCD frame size" group="Setup" state="Idle" perm="rw" timeout="0" timestamp="2018-08-07T20:03:20.0">
2018-08-07 20:03:20.01 HANDLER#0 < <defNumber name="X" label="Left-most pixel position" format="%g" min="0" max="5544" step="0">0</defNumber>
2018-08-07 20:03:20.01 HANDLER#0 < <defNumber name="Y" label="Top-most pixel position" format="%g" min="0" max="3684" step="0">0</defNumber>
2018-08-07 20:03:20.01 HANDLER#0 < <defNumber name="WIDTH" label="Frame width in pixels" format="%g" min="0" max="5544" step="0">5544</defNumber>
2018-08-07 20:03:20.01 HANDLER#0 < <defNumber name="HEIGHT" label="Frame height in pixels" format="%g" min="0" max="3684" step="0">3684</defNumber>
2018-08-07 20:03:20.01 HANDLER#0 < </defNumberVector>
2018-08-07 20:03:20.01 HANDLER#0 < <defNumberVector device="ASCOM QHYCCD Camera" name="CCD_BINNING" label="CCD binning" group="Setup" state="Idle" perm="rw" timeout="0" timestamp="2018-08-07T20:03:20.0">
2018-08-07 20:03:20.01 HANDLER#0 < <defNumber name="HOR_BIN" label="Horizontal binning" format="%g" min="0" max="2" step="0">1</defNumber>
2018-08-07 20:03:20.01 HANDLER#0 < <defNumber name="VER_BIN" label="Vertical binning" format="%g" min="0" max="2" step="0">1</defNumber>
2018-08-07 20:03:20.01 HANDLER#0 < </defNumberVector>
2018-08-07 20:03:20.01 HANDLER#0 < <defNumberVector device="ASCOM QHYCCD Camera" name="CCD_INFO" label="CCD Info" group="Info" state="Ok" perm="ro" timeout="0" timestamp="2018-08-07T20:03:20.0">
2018-08-07 20:03:20.01 HANDLER#0 < <defNumber name="CCD_PIXEL_SIZE" label="Pixel size" format="%5.2f" min="0" max="0" step="0">2.4</defNumber>
2018-08-07 20:03:20.01 HANDLER#0 < <defNumber name="CCD_PIXEL_SIZE_X" label="Horizontal pixel size" format="%5.2f" min="0" max="0" step="0">2.4</defNumber>
2018-08-07 20:03:20.01 HANDLER#0 < <defNumber name="CCD_PIXEL_SIZE_Y" label="Vertical pixel size" format="%5.2f" min="0" max="0" step="0">2.4</defNumber>
2018-08-07 20:03:20.01 HANDLER#0 < <defNumber name="FULL_WELL_CAPACITY" label="Full well capacity" format="%5.2f" min="0" max="0" step="0">65535</defNumber>
2018-08-07 20:03:20.01 HANDLER#0 < <defNumber name="ELECTRONS_PER_ADU" label="Photoelectrons per A/D unit" format="%5.2f" min="0" max="0" step="0">65535</defNumber>
2018-08-07 20:03:20.01 HANDLER#0 < </defNumberVector>
2018-08-07 20:03:20.01 HANDLER#0 < <defBLOBVector device="ASCOM QHYCCD Camera" name="CCD1" label="Image" group="Image" state="Ok" perm="ro" timeout="0" timestamp="2018-08-07T20:03:20.0">
2018-08-07 20:03:20.01 HANDLER#0 < <defBLOB name="CCD1" label="Image"/>
2018-08-07 20:03:20.01 HANDLER#0 < </defBLOBVector>
2018-08-07 20:03:20.01 HANDLER#0 < <defSwitchVector device="ASCOM QHYCCD Camera" name="UPLOAD_MODE" label="Upload Mode" group="Setup" state="Idle" perm="rw" rule="OneOfMany" timeout="0" timestamp="2018-08-07T20:03:20.0">
2018-08-07 20:03:20.01 HANDLER#0 < <defSwitch name="UPLOAD_CLIENT" label="Client">On</defSwitch>
2018-08-07 20:03:20.01 HANDLER#0 < <defSwitch name="UPLOAD_LOCAL" label="Local">Off</defSwitch>
2018-08-07 20:03:20.01 HANDLER#0 < <defSwitch name="UPLOAD_BOTH" label="Both">Off</defSwitch>
2018-08-07 20:03:20.01 HANDLER#0 < </defSwitchVector>
2018-08-07 20:03:20.01 HANDLER#0 < <defTextVector device="ASCOM QHYCCD Camera" name="UPLOAD_SETTINGS" label="Upload settings" group="Setup" state="Idle" perm="rw" timeout="0" timestamp="2018-08-07T20:03:20.0">
2018-08-07 20:03:20.01 HANDLER#0 < <defText name="UPLOAD_DIR" label="Dir"></defText>
2018-08-07 20:03:20.01 HANDLER#0 < <defText name="UPLOAD_PREFIX" label="Prefix">IMAGE_XXX</defText>
2018-08-07 20:03:20.01 HANDLER#0 < </defTextVector>
2018-08-07 20:03:20.01 HANDLER#0 < <defNumberVector device="ASCOM QHYCCD Camera" name="TELESCOPE_TIMED_GUIDE_NS" label="Timed pulse guide in N/S" group="Guide" state="Idle" perm="rw" timeout="0" timestamp="2018-08-07T20:03:20.0">
2018-08-07 20:03:20.01 HANDLER#0 < <defNumber name="TIMED_GUIDE_N" label="Guide the scope north" format="%g" min="0" max="5000" step="0">0</defNumber>
2018-08-07 20:03:20.01 HANDLER#0 < <defNumber name="TIMED_GUIDE_S" label="Guide the scope south" format="%g" min="0" max="5000" step="0">0</defNumber>
2018-08-07 20:03:20.01 HANDLER#0 < </defNumberVector>
2018-08-07 20:03:20.01 HANDLER#0 < <defNumberVector device="ASCOM QHYCCD Camera" name="TELESCOPE_TIMED_GUIDE_WE" label="Timed pulse guide in W/E" group="Guide" state="Idle" perm="rw" timeout="0" timestamp="2018-08-07T20:03:20.0">
2018-08-07 20:03:20.01 HANDLER#0 < <defNumber name="TIMED_GUIDE_W" label="Guide the scope north" format="%g" min="0" max="5000" step="0">0</defNumber>
2018-08-07 20:03:20.01 HANDLER#0 < <defNumber name="TIMED_GUIDE_E" label="Guide the scope south" format="%g" min="0" max="5000" step="0">0</defNumber>
2018-08-07 20:03:20.01 HANDLER#0 < </defNumberVector>
2018-08-07 20:03:20.01 HANDLER#0 < <setSwitchVector device="ASCOM QHYCCD Camera" name="CONNECTION" state="Ok" timeout="0" timestamp="2018-08-07T20:03:20.0" message="Connected...">
2018-08-07 20:03:20.01 HANDLER#0 < <oneSwitch name="CONNECT">On</oneSwitch>
2018-08-07 20:03:20.01 HANDLER#0 < <oneSwitch name="DISCONNECT">Off</oneSwitch>
2018-08-07 20:03:20.01 HANDLER#0 < </setSwitchVector>
2018-08-07 20:03:20.01 HANDLER#0 > <enableBLOB device='ASCOM HomeMade Focuser'>Also</enableBLOB>
2018-08-07 20:03:20.01 HANDLER#0 > <newSwitchVector
device='ASCOM HomeMade Focuser'
name='CONNECTION'>
<oneSwitch
name='CONNECT'>
On
</oneSwitch>
</newSwitchVector>
2018-08-07 20:03:20.52 HANDLER#0 < <defSwitchVector device="ASCOM HomeMade Focuser" name="CONNECTION" label="Connection" group="Main Control" state="Ok" perm="rw" rule="OneOfMany" timeout="0" timestamp="2018-08-07T20:03:20.5">
2018-08-07 20:03:20.52 HANDLER#0 < <defSwitch name="CONNECT" label="Connect">On</defSwitch>
2018-08-07 20:03:20.52 HANDLER#0 < <defSwitch name="DISCONNECT" label="Disconnect">Off</defSwitch>
2018-08-07 20:03:20.52 HANDLER#0 < </defSwitchVector>
2018-08-07 20:03:20.52 HANDLER#0 < <defTextVector device="ASCOM HomeMade Focuser" name="DRIVER_INFO" label="Driver Info" group="Options" state="Idle" perm="ro" timeout="0" timestamp="2018-08-07T20:03:20.5">
2018-08-07 20:03:20.52 HANDLER#0 < <defText name="DRIVER_NAME" label="Name">ASCOM HomeMade Focuser</defText>
2018-08-07 20:03:20.52 HANDLER#0 < <defText name="DRIVER_EXEC" label="Exec">INDI Server.exe</defText>
2018-08-07 20:03:20.52 HANDLER#0 < <defText name="DRIVER_VERSION" label="Version">0.2</defText>
2018-08-07 20:03:20.52 HANDLER#0 < <defText name="DRIVER_INTERFACE" label="Interface">8</defText>
2018-08-07 20:03:20.52 HANDLER#0 < <defText name="SERVER" label="Server">INDI Server for Windows ver. 2.2.7.0</defText>
2018-08-07 20:03:20.52 HANDLER#0 < <defText name="SOFTWARE_HOME" label="Home URL">http://www.cloudmakers.eu</defText>
2018-08-07 20:03:20.52 HANDLER#0 < </defTextVector>
2018-08-07 20:03:20.54 HANDLER#0 < <defSwitchVector device="ASCOM HomeMade Focuser" name="FOCUS_MOTION" label="Focus motion direction" group="Main Control" state="Ok" perm="rw" rule="OneOfMany" timeout="0" timestamp="2018-08-07T20:03:20.5">
2018-08-07 20:03:20.54 HANDLER#0 < <defSwitch name="FOCUS_INWARD" label="Inward">Off</defSwitch>
2018-08-07 20:03:20.54 HANDLER#0 < <defSwitch name="FOCUS_OUTWARD" label="Outward">On</defSwitch>
2018-08-07 20:03:20.54 HANDLER#0 < </defSwitchVector>
2018-08-07 20:03:20.54 HANDLER#0 < <defNumberVector device="ASCOM HomeMade Focuser" name="REL_FOCUS_POSITION" label="Relative position" group="Main Control" state="Ok" perm="rw" timeout="0" timestamp="2018-08-07T20:03:20.5">
2018-08-07 20:03:20.54 HANDLER#0 < <defNumber name="FOCUS_RELATIVE_POSITION" label="Move # of ticks in FOCUS_MOTION direction" format="%5.0f" min="0" max="0" step="0">100</defNumber>
2018-08-07 20:03:20.54 HANDLER#0 < </defNumberVector>
2018-08-07 20:03:20.54 HANDLER#0 < <defNumberVector device="ASCOM HomeMade Focuser" name="ABS_FOCUS_POSITION" label="Absolute position" group="Main Control" state="Ok" perm="rw" timeout="0" timestamp="2018-08-07T20:03:20.5">
2018-08-07 20:03:20.54 HANDLER#0 < <defNumber name="FOCUS_ABSOLUTE_POSITION" label="Ticks" format="%5.0f" min="0" max="100000" step="1">22761</defNumber>
2018-08-07 20:03:20.54 HANDLER#0 < </defNumberVector>
2018-08-07 20:03:20.54 HANDLER#0 < <defSwitchVector device="ASCOM HomeMade Focuser" name="FOCUS_ABORT_MOTION" label="Abort focus motion" group="Main Control" state="Ok" perm="rw" rule="OneOfMany" timeout="0" timestamp="2018-08-07T20:03:20.5">
2018-08-07 20:03:20.54 HANDLER#0 < <defSwitch name="ABORT" label="Abort focus motion">Off</defSwitch>
2018-08-07 20:03:20.54 HANDLER#0 < </defSwitchVector>
2018-08-07 20:03:20.54 HANDLER#0 < <setSwitchVector device="ASCOM HomeMade Focuser" name="CONNECTION" state="Ok" timeout="0" timestamp="2018-08-07T20:03:20.5" message="Connected...">
2018-08-07 20:03:20.54 HANDLER#0 < <oneSwitch name="CONNECT">On</oneSwitch>
2018-08-07 20:03:20.54 HANDLER#0 < <oneSwitch name="DISCONNECT">Off</oneSwitch>
2018-08-07 20:03:20.54 HANDLER#0 < </setSwitchVector>
2018-08-07 20:03:20.93 DRIVER#0 < <setNumberVector device="EQMOD Telescope" name="EQUATORIAL_COORD" state="Ok" timeout="60" timestamp="2018-08-07T20:03:20.9">
2018-08-07 20:03:20.93 DRIVER#0 < <oneNumber name="RA">9.03929688380188</oneNumber>
2018-08-07 20:03:20.93 DRIVER#0 < <oneNumber name="DEC">9.68165948275862</oneNumber>
2018-08-07 20:03:20.93 DRIVER#0 < </setNumberVector>
2018-08-07 20:03:21.01 DRIVER#2 < <setNumberVector device="ASCOM QHYCCD Camera" name="CCD_TEMPERATURE" state="Ok" timeout="0" timestamp="2018-08-07T20:03:21.0">
2018-08-07 20:03:21.01 DRIVER#2 < <oneNumber name="CCD_TEMPERATURE_VALUE">25</oneNumber>
2018-08-07 20:03:21.01 DRIVER#2 < </setNumberVector>
2018-08-07 20:03:21.02 DRIVER#3 < <setNumberVector device="ASCOM HomeMade Focuser" name="REL_FOCUS_POSITION" state="Ok" timeout="0" timestamp="2018-08-07T20:03:21.0">
2018-08-07 20:03:21.02 DRIVER#3 < <oneNumber name="FOCUS_RELATIVE_POSITION">100</oneNumber>
2018-08-07 20:03:21.02 DRIVER#3 < </setNumberVector>
2018-08-07 20:03:21.07 DRIVER#3 < <setNumberVector device="ASCOM HomeMade Focuser" name="ABS_FOCUS_POSITION" state="Ok" timeout="0" timestamp="2018-08-07T20:03:21.0">
2018-08-07 20:03:21.07 DRIVER#3 < <oneNumber name="FOCUS_ABSOLUTE_POSITION">22761</oneNumber>
2018-08-07 20:03:21.07 DRIVER#3 < </setNumberVector>
2018-08-07 20:03:21.95 DRIVER#0 < <setNumberVector device="EQMOD Telescope" name="EQUATORIAL_COORD" state="Ok" timeout="60" timestamp="2018-08-07T20:03:21.9">
2018-08-07 20:03:21.95 DRIVER#0 < <oneNumber name="RA">9.03957987869366</oneNumber>
2018-08-07 20:03:21.95 DRIVER#0 < <oneNumber name="DEC">9.68165948275862</oneNumber>
2018-08-07 20:03:21.95 DRIVER#0 < </setNumberVector>
2018-08-07 20:03:22.96 DRIVER#0 < <setNumberVector device="EQMOD Telescope" name="EQUATORIAL_COORD" state="Ok" timeout="60" timestamp="2018-08-07T20:03:22.9">
2018-08-07 20:03:22.96 DRIVER#0 < <oneNumber name="RA">9.03986287376055</oneNumber>
2018-08-07 20:03:22.96 DRIVER#0 < <oneNumber name="DEC">9.68165948275862</oneNumber>
2018-08-07 20:03:22.96 DRIVER#0 < </setNumberVector>
2018-08-07 20:03:23.98 DRIVER#0 < <setNumberVector device="EQMOD Telescope" name="EQUATORIAL_COORD" state="Ok" timeout="60" timestamp="2018-08-07T20:03:23.9">
2018-08-07 20:03:23.98 DRIVER#0 < <oneNumber name="RA">9.04014586865233</oneNumber>
2018-08-07 20:03:23.98 DRIVER#0 < <oneNumber name="DEC">9.68165948275862</oneNumber>
2018-08-07 20:03:23.98 DRIVER#0 < </setNumberVector>
2018-08-07 20:03:24.99 DRIVER#0 < <setNumberVector device="EQMOD Telescope" name="EQUATORIAL_COORD" state="Ok" timeout="60" timestamp="2018-08-07T20:03:24.9">
2018-08-07 20:03:24.99 DRIVER#0 < <oneNumber name="RA">9.04042747096509</oneNumber>
2018-08-07 20:03:24.99 DRIVER#0 < <oneNumber name="DEC">9.68165948275862</oneNumber>
2018-08-07 20:03:24.99 DRIVER#0 < </setNumberVector>
2018-08-07 20:03:25.99 DRIVER#0 < <setNumberVector device="EQMOD Telescope" name="EQUATORIAL_COORD" state="Ok" timeout="60" timestamp="2018-08-07T20:03:25.9">
2018-08-07 20:03:25.99 DRIVER#0 < <oneNumber name="RA">9.04070768034861</oneNumber>
2018-08-07 20:03:25.99 DRIVER#0 < <oneNumber name="DEC">9.68165948275862</oneNumber>
2018-08-07 20:03:25.99 DRIVER#0 < </setNumberVector>
2018-08-07 20:03:27.01 DRIVER#0 < <setNumberVector device="EQMOD Telescope" name="EQUATORIAL_COORD" state="Ok" timeout="60" timestamp="2018-08-07T20:03:27.0">
2018-08-07 20:03:27.01 DRIVER#0 < <oneNumber name="RA">9.04099039682965</oneNumber>
2018-08-07 20:03:27.01 DRIVER#0 < <oneNumber name="DEC">9.68165948275862</oneNumber>
2018-08-07 20:03:27.01 DRIVER#0 < </setNumberVector>Ekos/INDI log:
[2018-08-07T20:02:18.267 Romance Daylight Time INFO ][ org.kde.kstars] - Welcome to KStars 2.9.7
[2018-08-07T20:02:18.298 Romance Daylight Time INFO ][ org.kde.kstars] - Build: 2018-07-25T17:48:37Z
[2018-08-07T20:02:18.314 Romance Daylight Time INFO ][ org.kde.kstars] - OS: "windows"
[2018-08-07T20:02:18.329 Romance Daylight Time INFO ][ org.kde.kstars] - API: "i386-little_endian-ilp32"
[2018-08-07T20:02:18.329 Romance Daylight Time INFO ][ org.kde.kstars] - Arch: "x86_64"
[2018-08-07T20:02:18.345 Romance Daylight Time INFO ][ org.kde.kstars] - Kernel Type: "winnt"
[2018-08-07T20:02:18.361 Romance Daylight Time INFO ][ org.kde.kstars] - Kernel Version: "10.0.17134"
[2018-08-07T20:02:26.426 Romance Daylight Time DEBG ][ org.kde.kstars] - Opened the User DB. Ready.
[2018-08-07T20:02:26.847 Romance Daylight Time INFO ][ org.kde.kstars] - Processing "unnamedstars.dat" , HTMesh Level 3
[2018-08-07T20:02:26.863 Romance Daylight Time INFO ][ org.kde.kstars] - Sky Mesh Size: 512
[2018-08-07T20:02:26.910 Romance Daylight Time INFO ][ org.kde.kstars] - Loaded DSO catalog file: "unnamedstars.dat"
[2018-08-07T20:02:27.535 Romance Daylight Time WARN ][ org.kde.kstars] - "Star HD20794 not found."
[2018-08-07T20:02:27.566 Romance Daylight Time WARN ][ org.kde.kstars] - "Star HD98230 not found."
[2018-08-07T20:02:27.597 Romance Daylight Time DEBG ][ default] - File opened: "C:/Users/cedri/AppData/Local/KStars Desktop Planetarium/bin/data/kstars/ngcic.dat"
[2018-08-07T20:02:27.613 Romance Daylight Time INFO ][ org.kde.kstars] - Loading NGC/IC objects
[2018-08-07T20:02:30.847 Romance Daylight Time DEBG ][ default] - File opened: "C:/Users/cedri/AppData/Local/KStars Desktop Planetarium/bin/data/kstars/comets.dat"
[2018-08-07T20:02:30.988 Romance Daylight Time WARN ][ org.kde.kstars] - "Object named Pluto not found"
[2018-08-07T20:02:31.004 Romance Daylight Time WARN ][ org.kde.kstars] - "Object named NGC 6050A not found"
[2018-08-07T20:02:31.019 Romance Daylight Time WARN ][ org.kde.kstars] - "Object named Pluto not found"
[2018-08-07T20:02:31.051 Romance Daylight Time WARN ][ org.kde.kstars] - "Object named Pluto not found"
[2018-08-07T20:02:31.051 Romance Daylight Time WARN ][ org.kde.kstars] - "Object named Pluto not found"
[2018-08-07T20:02:31.066 Romance Daylight Time WARN ][ org.kde.kstars] - "Object named Pluto not found"
[2018-08-07T20:02:31.066 Romance Daylight Time WARN ][ org.kde.kstars] - "Object named Quaoar (2002 LM60) not found"
[2018-08-07T20:02:31.082 Romance Daylight Time WARN ][ org.kde.kstars] - "Object named Ceres not found"
[2018-08-07T20:02:31.082 Romance Daylight Time WARN ][ org.kde.kstars] - "Object named Pallas not found"
[2018-08-07T20:02:31.097 Romance Daylight Time WARN ][ org.kde.kstars] - "Object named Vesta not found"
[2018-08-07T20:02:31.097 Romance Daylight Time WARN ][ org.kde.kstars] - "Object named Cybele not found"
[2018-08-07T20:02:31.113 Romance Daylight Time WARN ][ org.kde.kstars] - "Object named Psyche not found"
[2018-08-07T20:02:31.113 Romance Daylight Time WARN ][ org.kde.kstars] - "Object named Juno not found"
[2018-08-07T20:02:31.129 Romance Daylight Time WARN ][ org.kde.kstars] - "Object named Themis not found"
[2018-08-07T20:02:31.129 Romance Daylight Time WARN ][ org.kde.kstars] - "Object named Astraea not found"
[2018-08-07T20:02:31.144 Romance Daylight Time WARN ][ org.kde.kstars] - "Object named Lumen not found"
[2018-08-07T20:02:31.144 Romance Daylight Time WARN ][ org.kde.kstars] - "Object named Ida not found"
[2018-08-07T20:02:31.160 Romance Daylight Time WARN ][ org.kde.kstars] - "Object named Mathilde not found"
[2018-08-07T20:02:31.160 Romance Daylight Time WARN ][ org.kde.kstars] - "Object named Eros (1898 DQ) not found"
[2018-08-07T20:02:31.176 Romance Daylight Time WARN ][ org.kde.kstars] - "Object named Hektor (1907 XM) not found"
[2018-08-07T20:02:31.176 Romance Daylight Time WARN ][ org.kde.kstars] - "Object named Chiron (1977 UB) not found"
[2018-08-07T20:02:31.191 Romance Daylight Time WARN ][ org.kde.kstars] - "Object named Halley (1982 HG1) not found"
[2018-08-07T20:02:31.207 Romance Daylight Time WARN ][ org.kde.kstars] - "Object named Pluto not found"
[2018-08-07T20:02:31.207 Romance Daylight Time WARN ][ org.kde.kstars] - "Object named Pluto not found"
[2018-08-07T20:02:31.222 Romance Daylight Time WARN ][ org.kde.kstars] - "Object named Pluto not found"
[2018-08-07T20:02:31.222 Romance Daylight Time WARN ][ org.kde.kstars] - "Object named Quaoar (2002 LM60) not found"
[2018-08-07T20:02:31.238 Romance Daylight Time WARN ][ org.kde.kstars] - "Object named Ceres not found"
[2018-08-07T20:02:31.254 Romance Daylight Time WARN ][ org.kde.kstars] - "Object named Pallas not found"
[2018-08-07T20:02:31.254 Romance Daylight Time WARN ][ org.kde.kstars] - "Object named Vesta not found"
[2018-08-07T20:02:31.269 Romance Daylight Time WARN ][ org.kde.kstars] - "Object named Cybele not found"
[2018-08-07T20:02:31.269 Romance Daylight Time WARN ][ org.kde.kstars] - "Object named Psyche not found"
[2018-08-07T20:02:31.285 Romance Daylight Time WARN ][ org.kde.kstars] - "Object named Juno not found"
[2018-08-07T20:02:31.301 Romance Daylight Time WARN ][ org.kde.kstars] - "Object named Themis not found"
[2018-08-07T20:02:31.301 Romance Daylight Time WARN ][ org.kde.kstars] - "Object named Astraea not found"
[2018-08-07T20:02:31.301 Romance Daylight Time WARN ][ org.kde.kstars] - "Object named Lumen not found"
[2018-08-07T20:02:31.316 Romance Daylight Time WARN ][ org.kde.kstars] - "Object named Ida not found"
[2018-08-07T20:02:31.316 Romance Daylight Time WARN ][ org.kde.kstars] - "Object named Mathilde not found"
[2018-08-07T20:02:31.332 Romance Daylight Time WARN ][ org.kde.kstars] - "Object named Eros (1898 DQ) not found"
[2018-08-07T20:02:31.332 Romance Daylight Time WARN ][ org.kde.kstars] - "Object named Hektor (1907 XM) not found"
[2018-08-07T20:02:31.347 Romance Daylight Time WARN ][ org.kde.kstars] - "Object named Chiron (1977 UB) not found"
[2018-08-07T20:02:31.347 Romance Daylight Time WARN ][ org.kde.kstars] - "Object named Halley (1982 HG1) not found"
[2018-08-07T20:02:31.551 Romance Daylight Time DEBG ][ org.kde.kstars] - Paths to color scheme : ("C:/Users/cedri/AppData/Local/KStars Desktop Planetarium/bin/data/kstars/themes")
[2018-08-07T20:02:32.133 Romance Daylight Time DEBG ][ org.kde.kstars] - Daylight Saving Time active
[2018-08-07T20:02:32.140 Romance Daylight Time DEBG ][ org.kde.kstars] - Next Daylight Savings Time change (Local Time): "Sun Oct 28 01:00:00 2018 GMT"
[2018-08-07T20:02:32.143 Romance Daylight Time DEBG ][ org.kde.kstars] - Next Daylight Savings Time change (UTC): "Sat Oct 27 22:59:59 2018 GMT"
[2018-08-07T20:02:32.222 Romance Daylight Time DEBG ][ org.kde.kstars] - Daylight Saving Time active
[2018-08-07T20:02:32.222 Romance Daylight Time DEBG ][ org.kde.kstars] - Next Daylight Savings Time change (Local Time): "Sun Oct 28 01:00:00 2018 GMT"
[2018-08-07T20:02:32.237 Romance Daylight Time DEBG ][ org.kde.kstars] - Next Daylight Savings Time change (UTC): "Sat Oct 27 22:59:59 2018 GMT"
[2018-08-07T20:02:32.237 Romance Daylight Time DEBG ][ org.kde.kstars] - Starting the timer
[2018-08-07T20:02:32.425 Romance Daylight Time DEBG ][ org.kde.kstars] - Date/Time is: "Tue Aug 7 18:02:32 2018 GMT"
[2018-08-07T20:02:32.440 Romance Daylight Time DEBG ][ org.kde.kstars] - Location: "Bordeaux, Gironde, France"
[2018-08-07T20:02:32.440 Romance Daylight Time DEBG ][ org.kde.kstars] - TZ0: 1 TZ: 2
[2018-08-07T20:02:32.503 Romance Daylight Time DEBG ][ org.kde.kstars] - "Black Body" :: "C:/Users/cedri/AppData/Local/KStars Desktop Planetarium/bin/data/kstars/themes/blackbody.colors"
[2018-08-07T20:02:32.518 Romance Daylight Time DEBG ][ default] - Did not find glibc >= 2.1. Will use ANSI-compliant sin()/cos() functions.
[2018-08-07T20:02:46.574 Romance Daylight Time DEBG ][ org.kde.kstars] - Reporting new timestep value: 60
[2018-08-07T20:03:01.066 Romance Daylight Time WARN ][ default] - ShellExecute 'file:///C:/Users/cedri/.indi/logs' failed (error 2).
[2018-08-07T20:03:08.507 Romance Daylight Time WARN ][ default] - ShellExecute 'file:///C:/Users/cedri/.indi/logs' failed (error 2).
[2018-08-07T20:03:13.452 Romance Daylight Time DEBG ][ org.kde.kstars.ekos] - Resetting Ekos Manager...
[2018-08-07T20:03:13.452 Romance
Hi all,
I got all excited when I discovered the windows version of ekos: I love the scheduler. But as I have to use Windows (because of unsupported drivers under Linux) I had to use something else until now.
I installed wINDI and Ekos and everything was fine : devices found, INDI server running. When I start Ekos, the INDI config screens are loaded, all the devices are there with their options. I can use them all as expected. But in Ekos, the mount tab is missing. I've tried all I could but didn't find a solution.
What can I do to solve this problem or diagnose it?
Thanks
Read More...
© 2003-2022 by INDI Library. All rights reserved.