lx200classic and lx200autostar are included with INDI v0.2+. You can use either driver to control the focuser. Your results may vary, the Motofocus might not move on the lowest speed setting. You should try both drivers to see which gives you the best results. Once you establish a connection to your telescope, you can use the focuser features.
There are no extra features for this driver
The lx200classic and lx200autostar drivers are used for telescope control as well as focus control. You can have a fine control of the focuser by setting the following parameters in the driver:
Focus Direction: in or out with respect to the mirror.
Focus Speed: Halt, Slow, and Fast for lx200classic. 1-4 speed settings for lx200autostar.
Focus Time: The duration of the focus motion in milliseconds before halt.
After setting #2 and #3, press either Focus In or Focus Out and the focuser will move with the desired speed until the timer reaches 0.
There are no known bugs for this driver. If you found a bug, please report it at INDI's bug tracking system at SourceForge. (You can log in with a variety of existing accounts, including Google, Yahoo and OpenID.)