×

INDI Library v1.9.2 Released (14 Sep 2021)

Bimonthly Stable INDI Library release introduces new drivers and fixes for existing ones.

Astroberry Server 2.0.1 is available now!

  • Posts: 122
  • Thank you received: 20
Will I know that doesn't work for sure. The camera side will take a standard usb cable, I tried it in my RPI3B+ with the same result, however when I used a standard cable it worked great (not the cable that came with the camera)
1 year 5 months ago #51474

Please Log in or Create an account to join the conversation.

  • Posts: 230
  • Thank you received: 31

What is the power rating on the PSU that you are powering your Pi from? Is it an official Pi PSU?

In general it is usually better to use a powered USB hub, that connects to the Pi and you plug the camera (and other equipment) into the powered USB hub, rather than rely on the voltage on the Pi USB ports to power the camera.

You might want to check your logs for messages like "Under-voltage detected!"
__
I blog my progress: www.coochey.net
1 year 5 months ago #51475

Please Log in or Create an account to join the conversation.

  • Posts: 9
  • Thank you received: 0
Hi Radek,
Great piece of software - using with EQ6 , Orion SSAG(QHY), Canon DSLR and ATIK cameras - with MacBook both as Remote and Local Kstars - on a Pi 3 and 4 - works great. Thanks.
Two questions:|
1) I've updated 2.0.0 with apt-get update and upgrade but the VNC Splash Screen still says 2.0.0 not 2.0.1 - Is there a terminal command I can run to see which version of astroberry is running?
2) If I wanted to use the ATIK Infinity as Live Viewing is it possible for the ATIK Infinity PC Software (running in a VM on MacBook) to see it via astroberry?
Cheers
Terry
1 year 5 months ago #51533

Please Log in or Create an account to join the conversation.

  • Posts: 963
  • Thank you received: 366
The version will probably refresh after reboot or you need to do dist-upgrade.
I don't know about ATIK Infinity, but INDI drivers use official ATIK libraries so it should be supported. Have you tried it yet?
--
Radek Kaczorek
Astroberry Server | NEQ6 | Atik 460EX | Atik EFW2 | ASI 120MM
1 year 5 months ago #51546

Please Log in or Create an account to join the conversation.

  • Posts: 9
  • Thank you received: 0
Hi Radek,

I found a file in /etc called astroberry.version - it says 2.0.1 - but even after numerous reboots the splash screen still says 2.0.0.



As an aside: I just tried ssh'ing into the astroberry (in an attempt to copy the above command and result as text) but got key errors - can ssh cope with more than one astroberry.local as I have a Pi3 and Pi4 set up? It seemed to say I have the wrong key.

I will ask ATIK if there is any way to get the Infinity Software to find the camera over the local network as opposed to USB on the local machine.

Terry
1 year 5 months ago #51554
Attachments:

Please Log in or Create an account to join the conversation.

  • Posts: 122
  • Thank you received: 20
Tweeb, I had to dump the cache on my browser for the version number to display properly. Not sure why, but it worked after I did that in Chrome.
1 year 5 months ago #51555

Please Log in or Create an account to join the conversation.

  • Posts: 963
  • Thank you received: 366
That's was I suspected. Browser was caching some parts of the user interface. I'm glad it works for you.
By the way... Isn't Atik Air the answer to your question related to ATIK Infinity? www.atik-cameras.com/atik-air-software/
--
Radek Kaczorek
Astroberry Server | NEQ6 | Atik 460EX | Atik EFW2 | ASI 120MM
Last edit: 1 year 5 months ago by Radek Kaczorek.
1 year 5 months ago #51561

Please Log in or Create an account to join the conversation.

  • Posts: 230
  • Thank you received: 31

You should rename one of your Pis or both, e.g. astroberry3 and astroberry4, That way you will address both via mDNS by different names and it should be able to differentiate between the two as separate systems.
__
I blog my progress: www.coochey.net
Last edit: 1 year 5 months ago by Giles. Reason: typo
1 year 5 months ago #51562

Please Log in or Create an account to join the conversation.

  • Posts: 963
  • Thank you received: 366
This is right. It is related how SSH handles authenticity of a destination host - each system has its unique keys generated at the first boot. If you access these systems by the same hostname you will get a warning from SSH. You can either remove key association as stated in SSH message each time or setup unique names for these systems, so to avoid conflict (same name, different keys).
--
Radek Kaczorek
Astroberry Server | NEQ6 | Atik 460EX | Atik EFW2 | ASI 120MM
1 year 5 months ago #51564

Please Log in or Create an account to join the conversation.

  • Posts: 236
  • Thank you received: 14
Hi,

No new updates on phd2? Thanks.

Tom
Skywatcher AZEQ5GT using EQMod
Pentax 100 SDUFII for the light
QHY168C mains with ASI120MC on guidescope
SX filter wheel
Robofocus focusers with DIY Moonlite compatible controller
RPI 4B, Stellarmate & Astroberry
1 year 5 months ago #51606

Please Log in or Create an account to join the conversation.

Moderators: Radek Kaczorek
Time to create page: 0.982 seconds