My ToupCam connects fine, however, when I try and capture, I get a freeze, then a disconnect / reconnect of the camera.

Toupcam shows invalid opcode.

Connected to Indi on UBUNTU 20.04 - Running on a x64 system.

Logs:
kernel: [ 173.002838] traps: indi_toupcam_cc[2209] trap invalid opcode ip:7f5d592f7a23 sp:7f5d541f0760 error:0 in libtoupcam.so.1.50.1[7f5d586ca000+1f79000]
Jul 14 23:59:03 telescope5 systemd[791]: Starting Notification regarding a crash report...
Jul 14 23:59:03 telescope5 update-notifier-crash[2212]: /usr/bin/whoopsie
Jul 14 23:59:04 telescope5 systemd[791]: update-notifier-crash.service: Succeeded.Jul 14 23:59:04 telescope5 systemd[791]: Finished Notification regarding a crash report.
Jul 14 23:59:37 telescope5 wpa_supplicant[648]: wlp2s0: CTRL-EVENT-BEACON-LOSS
Jul 14 23:59:52 telescope5 systemd[791]: Starting Notification regarding a crash report...
Jul 14 23:59:52 telescope5 update-notifier-crash[2218]: /usr/bin/whoopsie
Jul 14 23:59:52 telescope5 update-notifier-crash[2220]: ccd
Jul 15 00:00:27 telescope5 kernel: [ 257.151532] rtw_8821ce 0000:02:00.0: firmware failed to leave lps state

Confirmed here too.

Jasem, it crashes from start. Log attached.

Please run via Ekos Debugger and send the crash log.

I would be more than happy to do that, but I've just installed it from nightly, run it and when I press the Run button it doesn't execute anything. It says "Kstars started" , "INDI started" and nothing more.

Unfortunately I am running my EKOS on Windows. I will turn on all debugging I can on EKOS and see what I can find. I suspect one of the parameters in the XML file can't be updated causing the segfault. But not sure.

Thanksl.