×

INDI Library v2.0.6 is Released (02 Feb 2024)

Bi-monthly release with minor bug fixes and improvements

SBIG STi-c and STF8300 specific options are not recognized

  • Posts: 3
  • Thank you received: 0
Hello here,
I have two cams from SBIG : STI-c and a STF8300M with a filter wheel. They used to work well on an old ubuntu 18.04. I recently reinstall a new computer in ubuntu 22.04 and installed indi-full and kstars with ekos. My cams are recognized but with the STI-c I can't have the color format, either with the STF8300M, my filter wheel is not recognized. I have the following message in the log console : [ERROR] GetCcdInfo: CC_GET_CCD_INFO -> (Bad Parameter).
I did update my ubuntu 18.04, and I have the same problem.
It seems that only the commons options for SBIG are recognized. I don't know if any one experienced the same problem ?
1 year 6 months ago #86516

Please Log in or Create an account to join the conversation.

IIRC, this issue was fixed in GIT master. Please try the nightly PPA and see if the issue is resolved. Next stable INDI would be released in about a week.
1 year 6 months ago #86524

Please Log in or Create an account to join the conversation.

  • Posts: 3
  • Thank you received: 0
Thank you for your reply. I solved the problem and I can use back my cams !!
I tried the nightly build but it did the same. So I downloaded the 3rd party drivers source code from github and saw that there where a patch on the sbig_ccd module. I compiled the module with the patch and every thing is working now.
1 year 6 months ago #86531

Please Log in or Create an account to join the conversation.

1 year 6 months ago #86532

Please Log in or Create an account to join the conversation.

  • Posts: 3
  • Thank you received: 0
sbig_ccd.cpp Extended query should not return in error.
It has been submitted one month ago, I don't know why it didn't works with the nightly build and why I had to recompile.
Last edit: 1 year 6 months ago by Florent.
1 year 6 months ago #86550

Please Log in or Create an account to join the conversation.

Yes it if it was already merged then it should work with nightly build... odd.
1 year 6 months ago #86578

Please Log in or Create an account to join the conversation.

Time to create page: 0.612 seconds