Hi all,
I'm trying to connect my Sony A7III (ILCE-7M3) and A7RII (ILCE-7RM2) to my Raspberry Pi, which driver in INDI should I select?
It works (somewhat) with GPhoto CCD (but I couldn't get it to capture anything other than 1 second, maybe I will try again), but does not work at all with Sony DSLR (gives error about not being able to communicate with camera).
Am I missing something?

Please attach the verbose logs. Check my signature.

Alright, I will do that later when I get back. Thanks!

Hi,
I did the following:
Enable logging on INDI (CCD module)
Use GPhoto CCD instead of Sony DSLR
Set up a sequence of 5 frames of 5 seconds each, with a 10 second delay in between
Format: Native
Set the camera to BULB

It seems to release the shutter for the correct 5 seconds, but it gives up with an error after the 3rd frame.
Is there a way to keep the photos on the camera? I'm running Ekos on a Raspberry Pi and the transfer is really slow...

Hi,
Feel nice to find you i am an owner of a7iii too.
I wonder if finally the sony A7iii work right with the drivers indi on Stellarmate.
Its better to know before i buy the stellarmate

Thank you

Hi there,
Stellarmate works fine with my A7III, using native "Sony DSLR" driver. But remember to set the camera to "RAW" only first...

Wow!! Thank you! You save me! i made a mistake and tried with Gphoto without success.
i Didnt saw the Sony Driver.
Now everything works right and i feel ready for the the night fields...

Hi guys
I am a new user of sony A7S with the indi driver under raspbian (I usually use the ASCOm driver under W7).
Everything is going well with Bulb mode but when I use M mode and choose a shutter speed the driver crashes.
Have you ever managed to use M mode?
Thank you