just an update as instructed through Ekos/Indi to report on this at this address page

the only drawback is, it will not do it in RGB and if you change binning to 2x2, the driver shuts down and the tab disappears from the Indi control panel,
when running binning at 1x1 and in mono, despite the error reports coming up, it still takes a 60 sec exposure and pops up in the viewer on download completion.
The only test I haven't checked is if it is in colour despite being set to mono

2022-11-29T15:16:15: [INFO] Capture of one frame (60 stacked frames) took 62.283138 seconds.
2022-11-29T15:15:13: [INFO] Started 60.000-second manual exposure.
2022-11-29T15:15:13: [WARNING] Failed switching to manual exposure, control is unavailable
2022-11-29T15:15:13: [WARNING] Failed 60.000-second manual exposure, no adequate control is registered.
2022-11-29T15:15:13: [ERROR] Configure grayscale and stacking in order to stack streamed frames up to 60.000 seconds.
2022-11-29T15:15:13: [ERROR] Failed 60.000-second manual exposure, out of device bounds [0.000,1.000], and stacking is not ready.
2022-11-29T15:15:13: [WARNING] Failed 60.000-second manual exposure, no adequate control is registered.
2022-11-29T15:15:13: [ERROR] Configure grayscale and stacking in order to stack streamed frames up to 60.000 seconds.
2022-11-29T15:14:35: [INFO] Please report that the camera worked: Name: SKYRIS 132C/Skyris 132C Detected and working, to bit.ly/2S1Vxjq
2022-11-29T15:14:35: [INFO] Setting pixel size correctly for Skyris 132C 2022-11-29T15:15:13: [ERROR] Failed 60.000-second manual exposure, out of device bounds [0.000,1.000], and stacking is not ready.

2022-11-29T15:14:35: [WARNING] Manual/auto exposure control is not possible on the device!
2022-11-29T15:14:35: [INFO] Found initial Input "Camera 1", Format "8-bit Bayer GRGR/BGBG", Size 1280x960, Frame interval 1/30s
2022-11-29T15:14:35: [INFO] Please report that the camera worked: Name: SKYRIS 132C/Skyris 132C Detected and working, to bit.ly/2S1Vxjq
2022-11-29T15:14:35: [INFO] Setting pixel size correctly for Skyris 132C
2022-11-29T15:14:35: [WARNING] Manual/auto exposure control is not possible on the device!
2022-11-29T15:14:35: [INFO] Found initial Input "Camera 1", Format "8-bit Bayer GRGR/BGBG", Size 1280x960, Frame interval 1/30s
2022-11-29T15:14:35: [INFO] V4L2 CCD is online.
2022-11-29T15:14:35: [INFO] Please report that the camera worked: Name: SKYRIS 132C/Skyris 132C Detected and working, to bit.ly/2S1Vxjq
2022-11-29T15:14:35: [INFO] Setting pixel size correctly for Skyris 132C
2022-11-29T15:14:35: [WARNING] Manual/auto exposure control is not possible on the device!
2022-11-29T15:14:35: [INFO] Found initial Input "Camera 1", Format "8-bit Bayer GRGR/BGBG", Size 1280x960, Frame interval 1/30s
2022-11-29T15:14:35: [INFO] V4L2 CCD is online.
2022-11-29T15:14:35: [INFO] V4L2 CCD is online.