×

INDI Library v1.9.0 Released (23 Apr 2021)

Major INDI Library release v1.9.0 bring significant internal changes championed by @pawel-soja to modernize core INDI Library drivers and clients. New drivers for DeepSkyDad Flat Panel & Pegasus devices plus further improvements to PCM8 drivers.

Old QHY5 not detected

  • Posts: 5
  • Thank you received: 2
Hi,
I am new to Indi and am running it on an OdroidXU4 (ARM based, running Ubuntu 18.04.2 LTS armv7l -32-bit). I just cannot get the QHY5 (old one abd pre-dates QHY5II).

When i run dmesg i get

[42536.891911] RTL871X: set group key camid:5, addr:ec:f4:51:64:cb:bc, kid:1, type:AES
[42916.759625] usb 3-1.1.2: new high-speed USB device number 31 using xhci-hcd
[42916.872271] usb 3-1.1.2: New USB device found, idVendor=1618, idProduct=0901
[42916.872319] usb 3-1.1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[42916.951381] usb 3-1.1.2: usbfs: USBDEVFS_CONTROL failed cmd fxload rqt 64 rq 160 len 1 ret -71
[42917.035445] usb 3-1.1.2: USB disconnect, device number 31
[42918.807659] usb 3-1.1.2: new high-speed USB device number 32 using xhci-hcd
[42923.967640] usb 3-1.1.2: device descriptor read/64, error -110
[42939.583797] usb 3-1.1.2: device descriptor read/64, error -110
[42939.787735] usb 3-1.1.2: new high-speed USB device number 33 using xhci-hcd
[42944.959889] usb 3-1.1.2: device descriptor read/64, error -110
[42960.579780] usb 3-1.1.2: device descriptor read/64, error -110
[42960.692978] usb 3-1.1-port2: attempt power cycle
[42961.323704] usb 3-1.1.2: new high-speed USB device number 34 using xhci-hcd
[42966.371865] usb 3-1.1.2: device descriptor read/8, error -110
[42971.751853] usb 3-1.1.2: device descriptor read/8, error -110
[42971.959862] usb 3-1.1.2: new high-speed USB device number 35 using xhci-hcd
[42977.124094] usb 3-1.1.2: device descriptor read/8, error -110
[42982.499889] usb 3-1.1.2: device descriptor read/8, error -110
[42982.613493] usb 3-1.1-port2: unable to enumerate USB device

Can anyone help?
KStars/Ekos running on OdroidXU4 Ubuntu Mate on the Mount and RDP from laptop for remote access
Telescopes: Skywatcher ED80 & Altair Astro RC6
Mount: Skywatcher HEQ5
CCD: Atik 414EX
Guider: QHY5 on Skywatcher ST80
2 years 1 month ago #36948

Please Log in or Create an account to join the conversation.

  • Posts: 2019
  • Thank you received: 187

Replied by Gonzothegreat on topic Old QHY5 not detected

I have the same problem too
www.indilib.org/forum/ccds-dslrs/4975-qh...r-working.html#37448
no idea what happened, it worked fine (for an old QHY5...) before.
Kstars Mac osx
V3:
Odroid C4 / Borg 55FL f/3.6 FTF Series 80 Astrograph / CEM25p / Zwo ??? / QHY5L-II-M (OAG) / Gerd Neumann drawer

V2:
Odroid C1 / Megrez72 / HEQ5 pro / QHY5L-II-M (OAG) / Atik 314L+ / Gerd Neumann drawer
2 years 1 month ago #37449

Please Log in or Create an account to join the conversation.

Replied by knro on topic Old QHY5 not detected

I just emailed QHY to look into this.
Jasem Mutlaq
Support INDI & Ekos; Get StellarMate Astrophotography Gadget.
How to Submit Logs when you have problems?
Add your observatory info
The following user(s) said Thank You: Gonzothegreat
2 years 1 month ago #37450

Please Log in or Create an account to join the conversation.

  • Posts: 5
  • Thank you received: 2

Replied by amosct3 on topic Old QHY5 not detected

Hi,
Having read many posts and tried many things the one that worked was to make a change to the udev rules files. On my system the files are

/lib/udev/rules.d/85-qhyccd.rules

/etc/udev/rules.d/85-qhy.rules

Look for the line below and make sure you have the QHY5LOADER.HEX bit on the end.

ATTRS{idVendor}=="1618", ATTRS{idProduct}=="0901", RUN+="/sbin/fxload -t fx2 -I /lib/firmware/qhy/QHY5.HEX -D $env{DEVNAME} -s /lib/firmware/qhy/QHY5LOADER.HEX"

This worked for me.
KStars/Ekos running on OdroidXU4 Ubuntu Mate on the Mount and RDP from laptop for remote access
Telescopes: Skywatcher ED80 & Altair Astro RC6
Mount: Skywatcher HEQ5
CCD: Atik 414EX
Guider: QHY5 on Skywatcher ST80
The following user(s) said Thank You: Gonzothegreat, CygnusX1
2 years 1 month ago #37469

Please Log in or Create an account to join the conversation.

  • Posts: 2019
  • Thank you received: 187

Replied by Gonzothegreat on topic Old QHY5 not detected

That udev rule fixed it, I used the one I had in my backup folder and copied it to /etc/udev/rules.d
and issued the following command:
# udevadm control --reload-rules && udevadm trigger
Kstars Mac osx
V3:
Odroid C4 / Borg 55FL f/3.6 FTF Series 80 Astrograph / CEM25p / Zwo ??? / QHY5L-II-M (OAG) / Gerd Neumann drawer

V2:
Odroid C1 / Megrez72 / HEQ5 pro / QHY5L-II-M (OAG) / Atik 314L+ / Gerd Neumann drawer
2 years 1 month ago #37485

Please Log in or Create an account to join the conversation.

Time to create page: 0.472 seconds