Hello,

I´m absolute new in Kstars and Ekos. I installed the astroberry image on my Rasperry.

Now I have the following problem:
I connect my Canon EOS80D on the USB port. When I did this on my windows PC, the display show an computer, this happen not when I connect the cam to the Raspberry.

In Ekos I added unter "CCD": Canon DSLR
Then I Save and click "INDI start"
I get the error:
"No cameras detected. Check power and make sure camera is not mounted by another programs and try again"

I guess the raspberry don´t mount in anyway the camera. Is the Canon EOS80D not supported?

Thank you!

Hello again,

ich was now able to update the raspberry to the latest version with "apt-get".
Now he connect to the camera, but has the following problems:
1. Sometimes I get Err 70 in den display of the canon
2. Sometimes I get the Kstar Errto "INDI-Driver indi_canon_ccd is chrashed"
3. Sometimes no connect

Is there any settings I has to do?

Thank you!

Hi,

when I connect, after some seconds the display of the cam show ERR 70.
But Ekos still loading data from the camera. But a live view is not possible,

I attached a log file

Thank you!

Hello,

after upgrading the gphoto2 and libphoto2, it is working now fine!