- How critical is a good USB cable? How to know if this could be the issue. I have about 10 cables but only one of them seems to connect.
- Newer driver from Gphoto2 needed still? How to install?
I attach my workflow and the logs I was able to find. Please let me know if other info could be useful! It's vacation time now so I have some time to tinker with this.
[SOLVED] Sony A7S setup fails to save image #65276
The images save fine now. What I changed? Not much.
In KStars/Ekos/Indi Control Panel:
Under the tab GPhoto CCD, tab Options:
"Force BULB" set to Off instead of On.
"Debug Levels" to include "Driver Debug".
Tested with settings in Ekos "CCD" tab with settings as shown below.
Delay: 3 (This might be important; see www.gphoto.org/news/ section: "libgphoto2 2.5.26 release" )
AF set to AEF (should not be relevant)
Camera Tab >
ISO set to 100
DRO/Auto HDR set to "Off" (This might be important)
Long Exposure Noise Reduction (NR) set to "Off" (This might be important)
Utility Tab >
"Format" done but was also done before so should not be relevant.
"Version" checked to be the latest 3.20
I suspect the delay or the BULB thing fixed my problem. Hopefully it will yours too. Happy - 2021 - New Year!
[SOLVED] Sony A7S setup fails to save image #67383
Thanks for your post. I have an A7R4 and your post helped getting most of the way through getting images off the camera. I am running Kstars on a MacBook with the Sony and CEM40G running on Astroberry on an RPI4 with 8MB. Your advice got me to the point where I can reliably collect and get a FITS image displayed however, it doesn’t save either locally or remotely. It does end up on the SD card so it is still useful. I checked permissions locally and remotely and I can save a FITS file from the viewer. BTW I was running the camera in APSC mode just in case the image was too large.
Are there any diagnostics I can collect and look at?
[SOLVED] Sony A7S setup fails to save image #67417
Cool. I have no idea about running it with the RPI. Perhaps my below notes can help you to turn on the diagnostic reporting on the different (2?) levels of Kstars and indilib perhaps there are more?
Do you get things working well without the RPI? Simplify first if not and then build up?
* DB ~/Library/Application Support/kstars/userdb.sqlite
* Ekos ~/.indi
* KStars preferences file ~/Library/Preferences/kstarsrc
* Indi using utc time stamps ~/.indi/logs/2021-01-08/indi_sony_ccd/indi_sony_ccd_19/53/15.log
* KStars using local ts ~/Library/Application\ Support/kstars/logs
* Indi /Applications/KStars.app/Contents/MacOS/indi
* KStars Data Directory ~/Library/Application Support/kstars
[SOLVED] Sony A7S setup fails to save image #67420
Seems every way I turn is a roadblock. If it try and run on my Mac everything is fine but the iGuide camera driver isn’t available on the Mac. INDI is available on a PC. However the Sony camera behaves the same if I drive it from the RPI or from a direct USB connection to the Mac. It is 20x faster on the Mac. How do you drive it? I thought of building a Linux machine but probably no difference.
So I edit these files and find a debug switch? What do I do with the DB file?
[SOLVED] Sony A7S setup fails to save image #67429
Ok Maybe I am going mad. I tried again on my MacBook Pro and the same thing. Then I went to the RPI and everything works. The files appear on the RPI and the transfer is a very fast 6 seconds for a 61 mega-pixel image. The only difference, maybe, is I plugged the CEM40G into the USB3 port on the RPI and the camera is, as always, plugged into the USB connector on the declination mount. I can control the CEM40G and read the guide camera which is configured as a V4L2. Also I switched to TeamViewer which is really nice and pretty fast. I only wish I could hide the TeamView control widget.
[SOLVED] Sony A7S setup fails to save image #67776
I can imagine it feels like that and I'm in no way the expert in these matters. I have not done guiding like you are trying. I did see KStars perform a bit faster on the Mac in the case of the histogram calculations of the image viewer. It certainly is a nice port/build on macOS.
No need to edit the files. No need to do anything with the db file.
Do turn on debugging for the camera as you can do shown in the attached.
Let me know if you like me to record a little screencast demo of working with the Sony A7S.