Onstep 4.24c
Kstars 3.5.7 stable latest build
Indiserver don't know. Terminal command not found.

But all versions before won't work either accept 1.5.5 stellarmate, don't know the versions of Indi or Kstars from that one.
I can find out but not at home at the moment.

here the meridiian Flip with a Video
It is long but shows all the process and yes Ekos does not really update in real time the counter but the Flip works.

I have latest modification on github.com/azwing/indi
I made many tests with different set-ups and it works.
Would be nice if somebody could test before issuing a pull request.

Thx Alain!

Someone else has to test.
Can't test because i don't know how to install that.
Don't know anything about linux. 

I’ve not tested yet. My thank you was for the tip to enter West < East as a workaround for the problem.

I still have sometimes failures, OnStep complaining "Underpole Limit".
After increasing limits in Config.hNo more failures
 

Today the Meridian Flip fix has been merged to "libindi master" github.com/indilib/indi.
Most probably nightly builds will be available pretty soon.

Meridian Flip works fine as long as AXIS1_LIMIT_MIN and AXIS1_LIMIT_MAX are set respectively < -180 and > 180 (tested with -185, + 185)
Onstep version 4.24.p (Control Panel Firmware Data Tab)
indi_lx200_OnStep Version is 1.14 (Control Panel Connection Tab)
INDI Library: 1.9.5
kstars version 3.5.8 Beta
 
 
 
 
 

Can you post your configuration please?
   

Buongiorno Ettore,
here my Motion setup.
OnStep Config.h
#define AXIS1_LIMIT_MIN              -185
#define AXIS1_LIMIT_MAX              185
 
 


 

I'm confused, autoflip should be set to off when you want Ekos to control the flip no?

Thanks Alain.
Ettore

Ettore,

Meridian Flip e un Casino infernale

There is a lot of confusion with Autoflip.
In fact there is no command to issue Autoflip.
There are only limits that define a windows (between limiot East and limit West) where Onstep executes a flip when a goto is issued in this window and only if Autoflip is set to ON.
Otherwise when you reach the meridian cross Onstep will stop track or slew.
Ekos simply issues a goto when the HA is reached.

Maybe It is still not clear see references:
onstep.groups.io/g/main/wiki/5650
docs.google.com/document/d/11NlWvWyI5RxN...ekqkZmgQoIBw91M/edit
ma in Tedesco!
www.astrotreff.de/forum/index.php?thread...ian-flip-verhindern/