×

INDI Library v1.8.9 Released (01 Mar 2021)

INDI monthly update. In addition to driver improvements, major code refactoring is in progress by @pawel-soja to modernize and improve INDI aging code.

New forum users, please go here first: indilib.org/forum/new-forum-users.html

New Pentax Driver Testing

  • Posts: 43
  • Thank you received: 6

Replied by karlrees on topic New Pentax Driver Testing

Ralph,

PTP mode does not support Bulb mode. You need to switch to MSC mode. Honestly, unless you need live video, you may just want to forget about PTP mode (though I welcome testing).

In either mode, the Native driver (I cannot speak for gPhoto/legacy) is highly untested, unfortunately. The most feedback I ever received on it was from people using older camera models that ultimately just wouldn't work. The K-70, on the other hand, should work well, ideally, so I really appreciate feedback like yours. Could you let me know which OS you're using, as well as the specific hardware you're running on?

The Native driver hasn't changed in a few months. I'm not sure how far behind Astroberry is, but last time I tried it I think it was fairly up-to-date, so I doubt that an upgrade affected anything.

I need to investigate the SD card issue--I thought that worked, but it's not part of my normal process flow. I usually just save to the client. I'm on an extended road trip right now, so it may be a week or two before I have my equipment available to test.

Karl
8 months 1 week ago #57860

Please Log in or Create an account to join the conversation.

  • Posts: 43
  • Thank you received: 6

Replied by karlrees on topic New Pentax Driver Testing

DrawsACircle,

Were you using the Native driver when you set the ISO and aperture? As far as I know, the only way to get those to set are with the Native driver in PTP mode, and that's only if you have an actual lens attached to the camera (i.e. not prime focus). But then the shutter speed should have worked as well--unless of course you were in Bulb mode.

Karl
8 months 1 week ago #57861

Please Log in or Create an account to join the conversation.

  • Posts: 31
  • Thank you received: 1
I did a little testing after dayshift.

There are only two drivers i can use (Pentax gphoto and the allround Driver [forget the Name] ;) the Pentax native Driver is visible in another menu, but i can't start or stop it)

Still not able to take exposures in mft mode, only ptp and bulb is possible. But my cam was finally detected in mft mode after unmounting the sd card.

One package isn't updated while doing some sudo Update and Upgrade.

I think i build up my Rasperry Pi 3b from scratch... maybe i did something strange ;)

As long as plate solving is working with the k70 and my primary scope i'm fine. I do a 10 second exposure at a very low iso. After plate solving and goto i connect an external shutter release and unmount the camera.

@Karl do your Road Trip! I write an update after doing a fresh Install.
8 months 1 week ago #57883

Please Log in or Create an account to join the conversation.

  • Posts: 31
  • Thank you received: 1
All my fault ;) i thought that the Pentax Native driver was included in Astroberry... It was not... I compiled it by myself and everything is working now as pointed out ;)

Except saving on camera... it would be nice if you can take a look when you get some time left... It is not possible to define a path for saving (only on the rpi).

CS

Ralph
8 months 1 week ago #57950

Please Log in or Create an account to join the conversation.

  • Posts: 31
  • Thank you received: 1
I switched to Stellarmate. I think it is better to support people who are behind such a great project and it is easier to setup and install. Everything works as it should with the driver. I only have to switch to manual when i do short exposures.

In MFT mode (both M and B) i am not able to take Bias Frames... for this i have to switch to PFT Mode. Nevertheless, i do mostly Dark-Frames and Flat and FlatDarks, so not really in need of Bias Frames.

Saving to SD isn't relevant anymore to me. I realized that saving to the Pi is ultra fast (for native) and the transfer to my local desktop takes around 15 seconds in fit format. Hope to get a little bonus when my new RPi 4b 4GB arrives today (5Ghz Wlan).

But i discovered a strange bug... i switched from a AC Adapter with Battery Dummy to a cigarette lighter adapter with battery dummy. Some less cable chaos and i don't have so set my BRESSER Mobile Power Station 100 Watt to AC mode anymore.

The K70 is getting enough power, but the Pentax Native Driver is crashing all the time. Pentax Legacy and GPhoto CCD are working within their limitations (set exposure time in camera etc.). Switching back to the AC Adapter and the Pentax Native driver works as it should.
7 months 4 weeks ago #58415

Please Log in or Create an account to join the conversation.

  • Posts: 43
  • Thank you received: 6

Replied by karlrees on topic New Pentax Driver Testing

I was just thinking about the driver today. I think I'm almost caught up on work from my road trip and the kids are settling into online school finally, so I don't need to spend so much time on family IT issues. So I think I can look at it this weekend.

Which version of the Pi have you been using? Do you have any logs I can look at?

I'm not exactly sure why Bias frames would throw a problem. The driver itself doesn't do anything different for Bias frames versus other images. However, it *may* be related to requesting that the driver deliver the Bias frame in FITs format, or Kstars/Ekos (on the Pi) automatically converting to FITs, if that's applicable to your setup. It's possible that your Bias frames are inherently more computationally intensive for FITs conversion, which could cause the driver to run out of resources and crash, depending on the hardware you use. I think the Pi4 should be able to consistently handle it, but I know the Pi3 will often crash during FITs conversion, unless the camera is set to shoot low resolution JPEG images. The JPEG resolution can only be changed in PTP mode, so perhaps you have changed the resolution in PTP mode, and that is why BIAS frames work. This is all just a hypothesis, of course.

If you're upgrading from a Pi3 to a Pi4, you'll definitely see some improvement, though I don't think 5GHz Wlan will by itself make much of a difference. The main bottlenecks for me at least are 1) the transfer from the camera to the Pi; and 2) FITs conversion, if I'm doing it on the Pi (even with a Pi4). I would recommend turning off any setting that causes the driver to convert to FITs, and then set Kstars/Ekos on your local desktop to auto-convert to FITs instead.

Your bug with the AC adapter is very weird. I don't have the exact same setup to test, unfortunately. I honestly have no idea. Logs may offer some insight.

You mention having to switch to manual when you do short exposures. I was noticing some odd behavior myself when I was trying to capture Jupiter out in the middle of nowhere last week. I think this may have been the first time I had field-tested anything that needed less than a second with the Pentax driver, and it did not go as expected. Seems like there may have been two bugs. 1) I think anything less than a second may crash bulb mode; 2) it seems like MSC mode may not be requesting the right exposure time for short exposures. I was going to investigate these more when I had the time. But I'm just wondering if you observed similar problems.
7 months 4 weeks ago #58439

Please Log in or Create an account to join the conversation.

  • Posts: 31
  • Thank you received: 1
Hi Karl,

i just upgraded from my old Rasperry Pi 3b to a Rasperry Pi 4b 4GB and the improvements in stability and speed are as you described them. Download time isn't an issue anymore for me. I started dithering and it seems to me, that dithering begins when the download is started. No wasted time anymore (nevertheless we are talking round about 15 seconds ;) ) Think i switch to native and do the fits conversion in my desktop pc.

And i switched from Astroberry to Stellarmate. The use of the mobile app and support was a big point for me. A wrote a ticket on the stellarmate website and Jasem replied a few minutes later. I should open an issue on github he pointed out.

I did a little testing like Jasem told me. I connected the cam using USB to my desktop PC running Win10 and used the cigarette lighter adapter as the power source.

While using pktriggerchord running on Win10 i was able to take pictures, download and preview them. Switching the same setup back to the Rpi or my desktop PC running Linux Mint 20 the driver crashed all the time.

In my opinion something crashes the driver and is not a lack of sufficient power i thought of at first.

Hope the following log helps a little bit...
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib/arm-linux-gnueabihf/libthread_db.so.1".
[New inferior 2 (process 4454)]
[Inferior 1 (process 4447) detached]
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib/arm-linux-gnueabihf/libthread_db.so.1".
process 4454 is executing new program: /usr/bin/indi_pentax
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib/arm-linux-gnueabihf/libthread_db.so.1".
Thread 2.1 "indi_pentax" received signal SIGPIPE, Broken pipe.
[Switching to Thread 0x74d96010 (LWP 4454)]
0x7665f944 in __GI___libc_write (fd=<optimized out>, buf=0x7effc1f4, nbytes=17) at ../sysdeps/unix/sysv/linux/write.c:26
#0  0x7665f944 in __GI___libc_write (fd=<optimized out>, buf=0x7effc1f4, nbytes=17) at ../sysdeps/unix/sysv/linux/write.c:26
#1  0x766037b8 in _IO_new_file_write (f=0x766e4cf0 <_IO_2_1_stderr_>, data=0x7effc1f4, n=17) at fileops.c:1183
#2  0x76602960 in new_do_write (fp=fp@entry=0x766e4cf0 <_IO_2_1_stderr_>, data=data@entry=0x7effc1f4 "indi_pentax: EOF\n", to_do=to_do@entry=17) at libioP.h:839
#3  0x76603f14 in _IO_new_file_xsputn (n=17, data=<optimized out>, f=0x766e4cf0 <_IO_2_1_stderr_>) at fileops.c:1262
#4  _IO_new_file_xsputn (f=0x766e4cf0 <_IO_2_1_stderr_>, data=<optimized out>, n=17) at fileops.c:1204
#5  0x765dd918 in buffered_vfprintf (s=s@entry=0x766e4cf0 <_IO_2_1_stderr_>, format=format@entry=0x76d51ec4 "%s: EOF\n", args=...) at ../libio/libioP.h:839
#6  0x765db458 in _IO_vfprintf_internal (s=s@entry=0x766e4cf0 <_IO_2_1_stderr_>, format=format@entry=0x76d51ec4 "%s: EOF\n", ap=..., ap@entry=...) at vfprintf.c:1296
#7  0x76680f30 in ___fprintf_chk (fp=0x766e4cf0 <_IO_2_1_stderr_>, flag=flag@entry=1, format=0x76d51ec4 "%s: EOF\n") at fprintf_chk.c:35
#8  0x76ce8db6 in fprintf (__fmt=0x76d51ec4 "%s: EOF\n", __stream=<optimized out>) at /usr/include/arm-linux-gnueabihf/bits/stdio2.h:100
#9  clientMsgCB (fd=<optimized out>, arg=<optimized out>) at ./indidriver.c:884
#10 0x76cea08a in callCallback (rfdp=0x7efff79c) at ./eventloop.c:347
#11 oneLoop () at ./eventloop.c:439
#12 0x76cea21c in eventLoop () at ./eventloop.c:106
#13 0x76ce4c6e in main (ac=0, av=<optimized out>) at ./indidrivermain.c:98
#14 0x765b1718 in __libc_start_main (main=0x7efff9c4, argc=1986936832, argv=0x765b1718 <__libc_start_main+268>, init=<optimized out>, fini=0x430c7d <__libc_csu_fini>, rtld_fini=0x76fde4c4 <_dl_fini>, stack_end=0x7efff9c4) at libc-start.c:308
#15 0x00415684 in _start ()
Backtrace stopped: previous frame identical to this frame (corrupt stack?)

Should we switch to github?
7 months 3 weeks ago #58441

Please Log in or Create an account to join the conversation.

  • Posts: 43
  • Thank you received: 6

Replied by karlrees on topic New Pentax Driver Testing

Ralph,

Is this happening immediately after starting indi_pentax, or is there delay? The log shows that indi_pentax is dying, but doesn't really offer a hint as to why. Did you try pktriggercord by itself on the Pi and/or your Ubuntu desktop? If not, that would help narrow down the problem. You could also try running indiserver from a command prompt with camera on and plugged in: indiserver -v indi_pentax. That should give us a little more information.

Did the Pi4 solve the Bias frame problem?

I have no preference on github versus the INDI forum.

Karl
7 months 3 weeks ago #58449

Please Log in or Create an account to join the conversation.

  • Posts: 252
  • Thank you received: 17

Replied by phomer60 on topic New Pentax Driver Testing

Noideaforaname,

Referring to ypur comment "i switched from an AC Adapter with Battery Dummy to a cigarette lighter adapter with battery dummy."

What exactly is a battery dummy?

Paul
7 months 3 weeks ago #58475

Please Log in or Create an account to join the conversation.

  • Posts: 31
  • Thank you received: 1
@phomer60

A battery dummy is a fake battery which you plug in your camera. This fake battery is connected to an external power source.

@karlrees

Did some testing again this night. All the time using Stellarmate/Ekos/INDI. I didn't managed to run pktriggercord using Linux Mint 20 or my Rasperry Pi and connected to my Bresser Mobile Power Station using the cigarette lighter adapater connected to my K70.

1. Pentax Legacy Driver -> works (no driver crash, image is taken with predefined shutter speed and iso)
2. GPhoto CCD Driver -> works (no driver crash, image is taken with predefined shutter speed and iso)
3. Pentax Android App -> no problem at all (AF, Preview, changing modes, shutterspeed, iso, etc)

Made another Log using Ekos only for INDI and CCD. Seems to be a buffer overrun. My knowledge about code lines is years old.
[2020-08-21T14:01:49.379 CEST DEBG ][           org.kde.kstars.ekos] - Resetting Ekos Manager...
[2020-08-21T14:01:49.391 CEST WARN ][                       default] - QSqlDatabasePrivate::removeDatabase: connection 'filter_db' is still in use, all queries will cease to work.
[2020-08-21T14:01:49.391 CEST WARN ][                       default] - QSqlDatabasePrivate::addDatabase: duplicate connection name 'filter_db', old connection removed.
[2020-08-21T14:01:49.439 CEST INFO ][           org.kde.kstars.ekos] - "Starting INDI services..."
[2020-08-21T14:01:49.443 CEST DEBG ][           org.kde.kstars.indi] - INDI: Starting local drivers...
[2020-08-21T14:01:49.444 CEST DEBG ][           org.kde.kstars.indi] - Starting INDI Server:  ("-v", "-p", "7624", "-m", "300", "-r", "0", "-f", "/tmp/indififo2222032e") -f "/tmp/indififo2222032e"
[2020-08-21T14:01:49.476 CEST DEBG ][           org.kde.kstars.indi] - INDI Server Started?  true
[2020-08-21T14:01:49.477 CEST DEBG ][           org.kde.kstars.indi] - INDI: INDI Server started locally on port  7624
[2020-08-21T14:01:49.478 CEST DEBG ][           org.kde.kstars.indi] - Starting INDI Driver  "indi_pentax"
[2020-08-21T14:01:49.479 CEST DEBG ][           org.kde.kstars.indi] - Starting INDI Driver  "indi_gpsd"
[2020-08-21T14:01:49.479 CEST DEBG ][           org.kde.kstars.indi] - Adding managed driver "Pentax DSLR"
[2020-08-21T14:01:49.479 CEST DEBG ][           org.kde.kstars.indi] - Adding managed driver "GPSD"
[2020-08-21T14:01:49.480 CEST DEBG ][           org.kde.kstars.indi] - INDIListener: Adding a new client manager to INDI listener..
[2020-08-21T14:01:49.480 CEST DEBG ][           org.kde.kstars.indi] - INDI: Connecting to local INDI server on port  7624  ...
[2020-08-21T14:01:49.481 CEST DEBG ][           org.kde.kstars.indi] - INDI server connected.
[2020-08-21T14:01:49.481 CEST DEBG ][           org.kde.kstars.indi] - Connection to INDI server is successful
[2020-08-21T14:01:49.484 CEST INFO ][           org.kde.kstars.ekos] - "INDI services started on port 7624."
[2020-08-21T14:01:49.505 CEST DEBG ][           org.kde.kstars.indi] - INDI Server:  "2020-08-21T12:01:49: startup: /usr/bin/indiserver -v -p 7624 -m 300 -r 0 -f /tmp/indififo2222032e "
[2020-08-21T14:01:49.505 CEST DEBG ][           org.kde.kstars.indi] - INDI Server:  "2020-08-21T12:01:49: listening to port 7624 on fd 3"
[2020-08-21T14:01:49.506 CEST DEBG ][           org.kde.kstars.indi] - INDI Server:  "FIFO: start indi_pentax"
[2020-08-21T14:01:49.506 CEST DEBG ][           org.kde.kstars.indi] - INDI Server:  "FIFO: Starting driver indi_pentax"
[2020-08-21T14:01:49.507 CEST DEBG ][           org.kde.kstars.indi] - INDI Server:  "2020-08-21T12:01:49: Driver indi_pentax: pid=3736 rfd=4 wfd=7 efd=8"
[2020-08-21T14:01:49.510 CEST DEBG ][           org.kde.kstars.indi] - INDI Server:  "FIFO: start indi_gpsd -n \"GPSD\""
[2020-08-21T14:01:49.511 CEST DEBG ][           org.kde.kstars.indi] - INDI Server:  "With name: GPSD"
[2020-08-21T14:01:49.511 CEST DEBG ][           org.kde.kstars.indi] - INDI Server:  "FIFO: Starting driver indi_gpsd"
[2020-08-21T14:01:49.512 CEST DEBG ][           org.kde.kstars.indi] - INDI Server:  "2020-08-21T12:01:49: Driver indi_gpsd: pid=3737 rfd=5 wfd=10 efd=11"
[2020-08-21T14:01:49.514 CEST DEBG ][           org.kde.kstars.indi] - INDI Server:  "2020-08-21T12:01:49: Client 6: new arrival from 127.0.0.1:36734 - welcome!"
[2020-08-21T14:01:49.515 CEST DEBG ][           org.kde.kstars.indi] - INDI Server:  ""
[2020-08-21T14:01:49.563 CEST DEBG ][           org.kde.kstars.indi] - Received new device GPSD
[2020-08-21T14:01:49.607 CEST DEBG ][           org.kde.kstars.indi] - INDI Server:  "2020-08-21T12:01:49: Driver indi_pentax: Looking for Pentax camera in  PTP mode."
[2020-08-21T14:01:49.608 CEST DEBG ][           org.kde.kstars.indi] - INDI Server:  "2020-08-21T12:01:49: Driver indi_pentax: Looking for Pentax camera in MSC mode."
[2020-08-21T14:01:49.608 CEST DEBG ][           org.kde.kstars.indi] - INDI Server:  ""
[2020-08-21T14:01:49.621 CEST DEBG ][           org.kde.kstars.indi] - INDIListener: New device GPSD
[2020-08-21T14:01:49.621 CEST INFO ][           org.kde.kstars.ekos] - Ekos received a new device:  "GPSD"
[2020-08-21T14:01:49.625 CEST DEBG ][           org.kde.kstars.indi] - < GPSD >: < CONNECTION >
[2020-08-21T14:01:49.633 CEST DEBG ][           org.kde.kstars.indi] - < GPSD >: < DRIVER_INFO >
[2020-08-21T14:01:49.646 CEST DEBG ][           org.kde.kstars.indi] - < GPSD >: < CONFIG_PROCESS >
[2020-08-21T14:01:49.655 CEST INFO ][           org.kde.kstars.ekos] - "GPSD" Version: "0.5" Interface: 32832 is connected.
[2020-08-21T14:01:49.655 CEST DEBG ][           org.kde.kstars.ekos] - 1  devices connected out of  1
[2020-08-21T14:01:49.781 CEST DEBG ][           org.kde.kstars.indi] - < GPSD >: < GEOGRAPHIC_COORD >
[2020-08-21T14:01:49.787 CEST DEBG ][           org.kde.kstars.indi] - < GPSD >: < TIME_UTC >
[2020-08-21T14:01:49.791 CEST DEBG ][           org.kde.kstars.indi] - < GPSD >: < GPS_REFRESH >
[2020-08-21T14:01:49.793 CEST DEBG ][           org.kde.kstars.indi] - < GPSD >: < GPS_REFRESH_PERIOD >
[2020-08-21T14:01:49.798 CEST INFO ][           org.kde.kstars.indi] - GPSD :  "[INFO] GPS fix is in progress... "
[2020-08-21T14:01:49.799 CEST DEBG ][           org.kde.kstars.indi] - < GPSD >: < GPS_STATUS >
[2020-08-21T14:01:49.802 CEST DEBG ][           org.kde.kstars.indi] - < GPSD >: < POLARIS >
[2020-08-21T14:01:49.805 CEST DEBG ][           org.kde.kstars.indi] - < GPSD >: < GPS_TIME_SOURCE >
[2020-08-21T14:01:49.846 CEST INFO ][           org.kde.kstars.indi] - GPSD :  "[INFO] No previous configuration found. To save driver configuration, click Save Configuration in Options tab. "
[2020-08-21T14:01:51.264 CEST DEBG ][           org.kde.kstars.indi] - INDI Server:  "2020-08-21T12:01:51: Driver indi_pentax: The Pentax camera driver for MSC mode uses PkTriggerCord, courtesy of Andras Salamon.  See https://pktriggercord.melda.info"
[2020-08-21T14:01:51.264 CEST DEBG ][           org.kde.kstars.indi] - INDI Server:  ""
[2020-08-21T14:01:51.481 CEST DEBG ][           org.kde.kstars.indi] - INDI Server:  "2020-08-21T12:01:51: Driver indi_pentax: snooping on Telescope Simulator.EQUATORIAL_EOD_COORD"
[2020-08-21T14:01:51.481 CEST DEBG ][           org.kde.kstars.indi] - INDI Server:  ""
[2020-08-21T14:01:51.482 CEST DEBG ][           org.kde.kstars.indi] - Received new device PENTAX K-70 (MSC)
[2020-08-21T14:01:51.483 CEST DEBG ][           org.kde.kstars.indi] - INDI Server:  "2020-08-21T12:01:51: Driver indi_pentax: snooping on Telescope Simulator.TELESCOPE_INFO"
[2020-08-21T14:01:51.483 CEST DEBG ][           org.kde.kstars.indi] - INDI Server:  "2020-08-21T12:01:51: Driver indi_pentax: snooping on Telescope Simulator.GEOGRAPHIC_COORD"
[2020-08-21T14:01:51.484 CEST DEBG ][           org.kde.kstars.indi] - INDI Server:  "2020-08-21T12:01:51: Driver indi_pentax: snooping on Telescope Simulator.TELESCOPE_PIER_SIDE"
[2020-08-21T14:01:51.484 CEST DEBG ][           org.kde.kstars.indi] - INDI Server:  "2020-08-21T12:01:51: Driver indi_pentax: snooping on Rotator Simulator.ABS_ROTATOR_ANGLE"
[2020-08-21T14:01:51.485 CEST DEBG ][           org.kde.kstars.indi] - INDI Server:  "2020-08-21T12:01:51: Driver indi_pentax: snooping on Focuser Simulator.ABS_FOCUS_POSITION"
[2020-08-21T14:01:51.486 CEST DEBG ][           org.kde.kstars.indi] - INDI Server:  "2020-08-21T12:01:51: Driver indi_pentax: snooping on CCD Simulator.FILTER_SLOT"
[2020-08-21T14:01:51.486 CEST DEBG ][           org.kde.kstars.indi] - INDI Server:  "2020-08-21T12:01:51: Driver indi_pentax: snooping on CCD Simulator.FILTER_NAME"
[2020-08-21T14:01:51.487 CEST DEBG ][           org.kde.kstars.indi] - INDI Server:  "2020-08-21T12:01:51: Driver indi_pentax: snooping on SQM.SKY_QUALITY"
[2020-08-21T14:01:51.487 CEST DEBG ][           org.kde.kstars.indi] - INDI Server:  ""
[2020-08-21T14:01:51.513 CEST DEBG ][           org.kde.kstars.indi] - INDIListener: New device PENTAX K-70 (MSC)
[2020-08-21T14:01:51.514 CEST INFO ][           org.kde.kstars.ekos] - Ekos received a new device:  "PENTAX K-70 (MSC)"
[2020-08-21T14:01:51.547 CEST DEBG ][           org.kde.kstars.indi] - INDI Server:  "2020-08-21T12:01:51: Driver indi_pentax: snooping on EQMod Mount.EQUATORIAL_EOD_COORD"
[2020-08-21T14:01:51.547 CEST DEBG ][           org.kde.kstars.indi] - INDI Server:  "2020-08-21T12:01:51: Driver indi_pentax: snooping on EQMod Mount.TELESCOPE_INFO"
[2020-08-21T14:01:51.548 CEST DEBG ][           org.kde.kstars.indi] - INDI Server:  "2020-08-21T12:01:51: Driver indi_pentax: snooping on EQMod Mount.GEOGRAPHIC_COORD"
[2020-08-21T14:01:51.548 CEST DEBG ][           org.kde.kstars.indi] - INDI Server:  ""
[2020-08-21T14:01:51.549 CEST DEBG ][           org.kde.kstars.indi] - < PENTAX K-70 (MSC) >: < CONNECTION >
[2020-08-21T14:01:51.556 CEST DEBG ][           org.kde.kstars.indi] - < PENTAX K-70 (MSC) >: < DRIVER_INFO >
[2020-08-21T14:01:51.570 CEST DEBG ][           org.kde.kstars.indi] - < PENTAX K-70 (MSC) >: < POLLING_PERIOD >
[2020-08-21T14:01:51.574 CEST DEBG ][           org.kde.kstars.indi] - < PENTAX K-70 (MSC) >: < DEVICE_INFO >
[2020-08-21T14:01:51.586 CEST DEBG ][           org.kde.kstars.indi] - < PENTAX K-70 (MSC) >: < CONFIG_PROCESS >
[2020-08-21T14:01:51.595 CEST DEBG ][           org.kde.kstars.indi] - < PENTAX K-70 (MSC) >: < DEBUG >
[2020-08-21T14:01:51.599 CEST DEBG ][           org.kde.kstars.indi] - < PENTAX K-70 (MSC) >: < ACTIVE_DEVICES >
[2020-08-21T14:01:53.176 CEST INFO ][           org.kde.kstars.indi] - PENTAX K-70 (MSC) :  "[INFO] Connected to Pentax camera in MSC mode. "
[2020-08-21T14:01:53.178 CEST INFO ][           org.kde.kstars.ekos] - "PENTAX K-70 (MSC)" Version: "1.0" Interface: 2 is connected.
[2020-08-21T14:01:53.178 CEST DEBG ][           org.kde.kstars.ekos] - 2  devices connected out of  2
[2020-08-21T14:01:53.178 CEST INFO ][           org.kde.kstars.ekos] - All INDI devices are now connected.
[2020-08-21T14:01:53.252 CEST DEBG ][           org.kde.kstars.indi] - Removing device "PENTAX K-70 (MSC)"
[2020-08-21T14:01:53.282 CEST DEBG ][           org.kde.kstars.indi] - <  >: <  >
[2020-08-21T14:01:53.283 CEST DEBG ][           org.kde.kstars.indi] - <  >: < 6.9,,N,,H >
[2020-08-21T14:01:53.283 CEST DEBG ][           org.kde.kstars.indi] - < 8 >: <  >
[2020-08-21T14:01:53.283 CEST DEBG ][           org.kde.kstars.indi] - < H >: < \ufffd(D\ufffd >
[2020-08-21T14:01:53.283 CEST DEBG ][           org.kde.kstars.indi] - <  >: <  >
[2020-08-21T14:01:53.283 CEST DEBG ][           org.kde.kstars.indi] - < H >: < .3461955087638345,10.39046519964H >
[2020-08-21T14:01:53.284 CEST DEBG ][           org.kde.kstars.indi] - < h >: < 96548244 >
[2020-08-21T14:01:53.284 CEST DEBG ][           org.kde.kstars.indi] - < \ufffd >: <  >
[2020-08-21T14:01:53.284 CEST DEBG ][           org.kde.kstars.indi] - < 0a >: <  >
[2020-08-21T14:01:53.284 CEST DEBG ][           org.kde.kstars.indi] - < ) >: <  >
[2020-08-21T14:01:53.284 CEST DEBG ][           org.kde.kstars.indi] - < H >: < P\ufffd@\ufffd\ufffd
@\ufffd\ufffd`@\ufffd >
[2020-08-21T14:01:53.326 CEST DEBG ][           org.kde.kstars.indi] - INDI Server:  "2020-08-21T12:01:53: Client 9: new arrival from 127.0.0.1:36738 - welcome!"
[2020-08-21T14:01:53.326 CEST DEBG ][           org.kde.kstars.indi] - INDI Server:  "2020-08-21T12:01:53: Driver indi_pentax: *** buffer overflow detected ***:  terminated"
[2020-08-21T14:01:53.326 CEST DEBG ][           org.kde.kstars.indi] - INDI Server:  "2020-08-21T12:01:53: Driver indi_pentax: stderr EOF"
[2020-08-21T14:01:53.327 CEST DEBG ][           org.kde.kstars.indi] - INDI Server:  "<delProperty device=\"PENTAX K-70 (MSC)\"/>"
[2020-08-21T14:01:53.327 CEST DEBG ][           org.kde.kstars.indi] - INDI Server:  "2020-08-21T12:01:53: Driver indi_pentax: Terminated after #0 restarts."
[2020-08-21T14:01:53.327 CEST DEBG ][           org.kde.kstars.indi] - INDI Server:  "Child process 3736 died"
[2020-08-21T14:01:53.328 CEST DEBG ][           org.kde.kstars.indi] - INDI Server:  ""
[2020-08-21T14:01:53.328 CEST CRIT ][           org.kde.kstars.indi] - INDI driver  "indi_pentax"  crashed!
[2020-08-21T14:01:53.362 CEST DEBG ][           org.kde.kstars.indi] - < ,,,,- >: <  >
[2020-08-21T14:01:53.363 CEST DEBG ][           org.kde.kstars.indi] - < 0a >: <  >
[2020-08-21T14:01:53.363 CEST DEBG ][           org.kde.kstars.indi] - < H >: <  >
[2020-08-21T14:01:53.363 CEST DEBG ][           org.kde.kstars.indi] - <  >: <  >
[2020-08-21T14:01:53.363 CEST DEBG ][           org.kde.kstars.indi] - < \ufffd\ufffdF\ufffd`\ufffdA\ufffd >: < 4041373,47.54338H >
[2020-08-21T14:01:53.364 CEST DEBG ][           org.kde.kstars.indi] - < H\ufffd@\ufffd`\ufffdA\ufffd >: <  >
[2020-08-21T14:01:53.364 CEST DEBG ][           org.kde.kstars.indi] - < \ufffdK@\ufffd`\ufffdA\ufffd >: <  >
[2020-08-21T14:01:53.374 CEST DEBG ][           org.kde.kstars.indi] - INDIListener: Removing device "PENTAX K-70 (MSC)"
[2020-08-21T14:01:53.375 CEST INFO ][           org.kde.kstars.ekos] - "PENTAX K-70 (MSC) is offline."
[2020-08-21T14:01:58.068 CEST DEBG ][           org.kde.kstars.ekos] - Disconnecting  "GPSD"
[2020-08-21T14:01:58.069 CEST INFO ][           org.kde.kstars.ekos] - "Disconnecting INDI devices..."
[2020-08-21T14:01:58.075 CEST INFO ][           org.kde.kstars.indi] - GPSD :  "[INFO] GPS disconnected successfully. "
[2020-08-21T14:01:58.076 CEST DEBG ][           org.kde.kstars.ekos] - "GPSD"  is disconnected.
[2020-08-21T14:01:58.076 CEST INFO ][           org.kde.kstars.ekos] - "GPSD is disconnected."
[2020-08-21T14:01:59.087 CEST DEBG ][           org.kde.kstars.indi] - INDI: Stopping local drivers...
[2020-08-21T14:01:59.087 CEST DEBG ][           org.kde.kstars.indi] - Removing managed driver "Pentax DSLR"
[2020-08-21T14:01:59.088 CEST DEBG ][           org.kde.kstars.indi] - Removing managed driver "GPSD"
[2020-08-21T14:01:59.092 CEST DEBG ][           org.kde.kstars.indi] - INDIListener: Removing device "GPSD"
[2020-08-21T14:01:59.094 CEST DEBG ][           org.kde.kstars.indi] - INDIListener: Removing client manager for server localhost @ 7624
[2020-08-21T14:01:59.095 CEST DEBG ][           org.kde.kstars.indi] - INDI server disconnected. Exit code: 0
[2020-08-21T14:01:59.096 CEST DEBG ][           org.kde.kstars.indi] - INDI server disconnected. Exit code: 0
[2020-08-21T14:01:59.097 CEST DEBG ][           org.kde.kstars.indi] - Stopping INDI Driver  "indi_pentax"
[2020-08-21T14:01:59.097 CEST DEBG ][           org.kde.kstars.indi] - Stopping INDI Driver  "indi_gpsd"
[2020-08-21T14:01:59.098 CEST DEBG ][           org.kde.kstars.indi] - Stopping INDI Server  "localhost" @ "7624"
[2020-08-21T14:01:59.101 CEST DEBG ][           org.kde.kstars.indi] - INDI server disconnected from BLOB manager for Device: "PENTAX K-70 (MSC)" Property: "CCD1" Exit code: -1
[2020-08-21T14:01:59.102 CEST DEBG ][           org.kde.kstars.ekos] - Resetting Ekos Manager...
[2020-08-21T14:01:59.107 CEST WARN ][                       default] - QSqlDatabasePrivate::removeDatabase: connection 'filter_db' is still in use, all queries will cease to work.
[2020-08-21T14:01:59.108 CEST WARN ][                       default] - QSqlDatabasePrivate::addDatabase: duplicate connection name 'filter_db', old connection removed.
[2020-08-21T14:01:59.114 CEST INFO ][           org.kde.kstars.ekos] - "INDI services stopped."

Does this log help?

CS

Ralph
7 months 3 weeks ago #58507

Please Log in or Create an account to join the conversation.

  • Posts: 74
  • Thank you received: 6
Same problem here, GPhoto, Pentax Native and Pentax Legacy crashes.
My K-70 is in PTP mode, but it doesn't matter whether it's in PTP or MSC mode, same issue.:

[2020-08-22T12:55:34.662 CEST DEBG ][ org.kde.kstars.ekos] - Resetting Ekos Manager...
[2020-08-22T12:55:34.675 CEST INFO ][ org.kde.kstars.ekos] - "Starting INDI services..."
[2020-08-22T12:55:34.675 CEST DEBG ][ org.kde.kstars.indi] - INDI: Starting local drivers...
[2020-08-22T12:55:34.676 CEST DEBG ][ org.kde.kstars.indi] - Starting INDI Server: ("-v", "-p", "7624", "-m", "300", "-r", "0", "-f", "/tmp/indififo80f508b8") -f "/tmp/indififo80f508b8"
[2020-08-22T12:55:34.680 CEST DEBG ][ org.kde.kstars.indi] - INDI Server Started? true
[2020-08-22T12:55:34.680 CEST DEBG ][ org.kde.kstars.indi] - INDI: INDI Server started locally on port 7624
[2020-08-22T12:55:34.680 CEST DEBG ][ org.kde.kstars.indi] - Starting INDI Driver "indi_pentax"
[2020-08-22T12:55:34.680 CEST DEBG ][ org.kde.kstars.indi] - Adding managed driver "Pentax DSLR"
[2020-08-22T12:55:34.680 CEST DEBG ][ org.kde.kstars.indi] - INDIListener: Adding a new client manager to INDI listener..
[2020-08-22T12:55:34.680 CEST DEBG ][ org.kde.kstars.indi] - INDI: Connecting to local INDI server on port 7624 ...
[2020-08-22T12:55:34.681 CEST DEBG ][ org.kde.kstars.indi] - INDI server connected.
[2020-08-22T12:55:34.681 CEST DEBG ][ org.kde.kstars.indi] - Connection to INDI server is successful
[2020-08-22T12:55:34.681 CEST INFO ][ org.kde.kstars.ekos] - "INDI services started on port 7624."
[2020-08-22T12:55:34.684 CEST DEBG ][ org.kde.kstars.indi] - INDI Server: "2020-08-22T10:55:34: startup: /usr/bin/indiserver -v -p 7624 -m 300 -r 0 -f /tmp/indififo80f508b8 "
[2020-08-22T12:55:34.684 CEST DEBG ][ org.kde.kstars.indi] - INDI Server: "2020-08-22T10:55:34: listening to port 7624 on fd 3"
[2020-08-22T12:55:34.684 CEST DEBG ][ org.kde.kstars.indi] - INDI Server: "FIFO: start indi_pentax"
[2020-08-22T12:55:34.684 CEST DEBG ][ org.kde.kstars.indi] - INDI Server: "FIFO: Starting driver indi_pentax"
[2020-08-22T12:55:34.684 CEST DEBG ][ org.kde.kstars.indi] - INDI Server: "2020-08-22T10:55:34: Driver indi_pentax: pid=1756 rfd=4 wfd=7 efd=8"
[2020-08-22T12:55:34.684 CEST DEBG ][ org.kde.kstars.indi] - INDI Server: "2020-08-22T10:55:34: Client 5: new arrival from 127.0.0.1:52402 - welcome!"
[2020-08-22T12:55:34.684 CEST DEBG ][ org.kde.kstars.indi] - INDI Server: ""
[2020-08-22T12:55:34.739 CEST DEBG ][ org.kde.kstars.indi] - INDI Server: "2020-08-22T10:55:34: Driver indi_pentax: Device 0 (VID=25fb and PID=017d) is a Ricoh Imaging PENTAX K-70."
[2020-08-22T12:55:34.739 CEST DEBG ][ org.kde.kstars.indi] - INDI Server: ""
[2020-08-22T12:55:34.744 CEST DEBG ][ org.kde.kstars.indi] - INDI Server: "2020-08-22T10:55:34: Driver indi_pentax: Looking for Pentax camera in PTP mode."
[2020-08-22T12:55:34.744 CEST DEBG ][ org.kde.kstars.indi] - INDI Server: ""
[2020-08-22T12:55:34.748 CEST DEBG ][ org.kde.kstars.indi] - INDI Server: "2020-08-22T10:55:34: Driver indi_pentax: The Pentax camera driver for PTP mode uses Ricoh Camera SDK, courtesy of Ricoh Company, Ltd. See api.ricoh/products/camera-sdk."
[2020-08-22T12:55:34.748 CEST DEBG ][ org.kde.kstars.indi] - INDI Server: "2020-08-22T10:55:34: Driver indi_pentax: Looking for Pentax camera in MSC mode."
[2020-08-22T12:55:34.748 CEST DEBG ][ org.kde.kstars.indi] - INDI Server: ""
[2020-08-22T12:55:34.833 CEST DEBG ][ org.kde.kstars.indi] - INDI Server: "2020-08-22T10:55:34: Driver indi_pentax: snooping on Telescope Simulator.EQUATORIAL_EOD_COORD"
[2020-08-22T12:55:34.833 CEST DEBG ][ org.kde.kstars.indi] - INDI Server: "2020-08-22T10:55:34: Driver indi_pentax: snooping on Telescope Simulator.TELESCOPE_INFO"
[2020-08-22T12:55:34.833 CEST DEBG ][ org.kde.kstars.indi] - INDI Server: "2020-08-22T10:55:34: Driver indi_pentax: snooping on Telescope Simulator.GEOGRAPHIC_COORD"
[2020-08-22T12:55:34.833 CEST DEBG ][ org.kde.kstars.indi] - INDI Server: ""
[2020-08-22T12:55:34.833 CEST DEBG ][ org.kde.kstars.indi] - INDI Server: "2020-08-22T10:55:34: Driver indi_pentax: snooping on Telescope Simulator.TELESCOPE_PIER_SIDE"
[2020-08-22T12:55:34.833 CEST DEBG ][ org.kde.kstars.indi] - INDI Server: "2020-08-22T10:55:34: Driver indi_pentax: snooping on Rotator Simulator.ABS_ROTATOR_ANGLE"
[2020-08-22T12:55:34.833 CEST DEBG ][ org.kde.kstars.indi] - INDI Server: "2020-08-22T10:55:34: Driver indi_pentax: snooping on Focuser Simulator.ABS_FOCUS_POSITION"
[2020-08-22T12:55:34.833 CEST DEBG ][ org.kde.kstars.indi] - INDI Server: "2020-08-22T10:55:34: Driver indi_pentax: snooping on Focuser Simulator.FOCUS_TEMPERATURE"
[2020-08-22T12:55:34.833 CEST DEBG ][ org.kde.kstars.indi] - INDI Server: "2020-08-22T10:55:34: Driver indi_pentax: snooping on CCD Simulator.FILTER_SLOT"
[2020-08-22T12:55:34.833 CEST DEBG ][ org.kde.kstars.indi] - INDI Server: "2020-08-22T10:55:34: Driver indi_pentax: snooping on CCD Simulator.FILTER_NAME"
[2020-08-22T12:55:34.833 CEST DEBG ][ org.kde.kstars.indi] - INDI Server: "2020-08-22T10:55:34: Driver indi_pentax: snooping on SQM.SKY_QUALITY"
[2020-08-22T12:55:34.833 CEST DEBG ][ org.kde.kstars.indi] - INDI Server: ""
[2020-08-22T12:55:35.036 CEST DEBG ][ org.kde.kstars.indi] - INDI Server: "Child process 1756 died"
[2020-08-22T12:55:35.036 CEST DEBG ][ org.kde.kstars.indi] - INDI Server: "2020-08-22T10:55:35: Driver indi_pentax: stderr EOF"
[2020-08-22T12:55:35.036 CEST DEBG ][ org.kde.kstars.indi] - INDI Server: ""
[2020-08-22T12:55:35.036 CEST DEBG ][ org.kde.kstars.indi] - INDI Server: "2020-08-22T10:55:35: Driver indi_pentax: Terminated after #0 restarts."
[2020-08-22T12:55:35.036 CEST DEBG ][ org.kde.kstars.indi] - INDI Server: ""
[2020-08-22T12:55:35.036 CEST CRIT ][ org.kde.kstars.indi] - INDI driver "indi_pentax" crashed!
[2020-08-22T12:55:36.799 CEST DEBG ][ org.kde.kstars.indi] - Removing managed driver "Pentax DSLR"
[2020-08-22T12:55:36.799 CEST DEBG ][ org.kde.kstars.indi] - Stopping INDI Driver "indi_pentax"
[2020-08-22T12:55:36.799 CEST DEBG ][ org.kde.kstars.indi] - INDI Server: "FIFO: stop indi_pentax"
[2020-08-22T12:55:36.799 CEST DEBG ][ org.kde.kstars.indi] - INDI Server: "dp->name: indi_pentax - tDriver: indi_pentax"
[2020-08-22T12:55:36.799 CEST DEBG ][ org.kde.kstars.indi] - INDI Server: ""
[2020-08-22T12:55:37.800 CEST DEBG ][ org.kde.kstars.indi] - Adding managed driver "Pentax DSLR"
[2020-08-22T12:55:37.800 CEST DEBG ][ org.kde.kstars.indi] - Starting INDI Driver "indi_pentax"
[2020-08-22T12:55:37.800 CEST DEBG ][ org.kde.kstars.indi] - INDI Server: "FIFO: start indi_pentax"
[2020-08-22T12:55:37.801 CEST DEBG ][ org.kde.kstars.indi] - INDI Server: "FIFO: Starting driver indi_pentax"
[2020-08-22T12:55:37.801 CEST DEBG ][ org.kde.kstars.indi] - INDI Server: ""
[2020-08-22T12:55:37.801 CEST DEBG ][ org.kde.kstars.indi] - INDI Server: "2020-08-22T10:55:37: Driver indi_pentax: pid=1763 rfd=4 wfd=8 efd=9"
[2020-08-22T12:55:37.801 CEST DEBG ][ org.kde.kstars.indi] - INDI Server: ""
[2020-08-22T12:55:37.813 CEST DEBG ][ org.kde.kstars.indi] - INDI Server: "2020-08-22T10:55:37: Driver indi_pentax: Device 0 (VID=25fb and PID=017d) is a Ricoh Imaging PENTAX K-70."
[2020-08-22T12:55:37.813 CEST DEBG ][ org.kde.kstars.indi] - INDI Server: ""
[2020-08-22T12:55:37.818 CEST DEBG ][ org.kde.kstars.indi] - INDI Server: "2020-08-22T10:55:37: Driver indi_pentax: Looking for Pentax camera in PTP mode."
[2020-08-22T12:55:37.818 CEST DEBG ][ org.kde.kstars.indi] - INDI Server: "2020-08-22T10:55:37: Driver indi_pentax: The Pentax camera driver for PTP mode uses Ricoh Camera SDK, courtesy of Ricoh Company, Ltd. See api.ricoh/products/camera-sdk."
[2020-08-22T12:55:37.818 CEST DEBG ][ org.kde.kstars.indi] - INDI Server: "2020-08-22T10:55:37: Driver indi_pentax: Looking for Pentax camera in MSC mode."
[2020-08-22T12:55:37.818 CEST DEBG ][ org.kde.kstars.indi] - INDI Server: ""
[2020-08-22T12:55:37.913 CEST DEBG ][ org.kde.kstars.indi] - INDI Server: "2020-08-22T10:55:37: Driver indi_pentax: snooping on Telescope Simulator.EQUATORIAL_EOD_COORD"
[2020-08-22T12:55:37.913 CEST DEBG ][ org.kde.kstars.indi] - INDI Server: "2020-08-22T10:55:37: Driver indi_pentax: snooping on Telescope Simulator.TELESCOPE_INFO"
[2020-08-22T12:55:37.913 CEST DEBG ][ org.kde.kstars.indi] - INDI Server: "2020-08-22T10:55:37: Driver indi_pentax: snooping on Telescope Simulator.GEOGRAPHIC_COORD"
[2020-08-22T12:55:37.913 CEST DEBG ][ org.kde.kstars.indi] - INDI Server: "2020-08-22T10:55:37: Driver indi_pentax: snooping on Telescope Simulator.TELESCOPE_PIER_SIDE"
[2020-08-22T12:55:37.913 CEST DEBG ][ org.kde.kstars.indi] - INDI Server: "2020-08-22T10:55:37: Driver indi_pentax: snooping on Rotator Simulator.ABS_ROTATOR_ANGLE"
[2020-08-22T12:55:37.913 CEST DEBG ][ org.kde.kstars.indi] - INDI Server: "2020-08-22T10:55:37: Driver indi_pentax: snooping on Focuser Simulator.ABS_FOCUS_POSITION"
[2020-08-22T12:55:37.913 CEST DEBG ][ org.kde.kstars.indi] - INDI Server: ""
[2020-08-22T12:55:37.913 CEST DEBG ][ org.kde.kstars.indi] - INDI Server: "2020-08-22T10:55:37: Driver indi_pentax: snooping on Focuser Simulator.FOCUS_TEMPERATURE"
[2020-08-22T12:55:37.913 CEST DEBG ][ org.kde.kstars.indi] - INDI Server: "2020-08-22T10:55:37: Driver indi_pentax: snooping on CCD Simulator.FILTER_SLOT"
[2020-08-22T12:55:37.913 CEST DEBG ][ org.kde.kstars.indi] - INDI Server: "2020-08-22T10:55:37: Driver indi_pentax: snooping on CCD Simulator.FILTER_NAME"
[2020-08-22T12:55:37.913 CEST DEBG ][ org.kde.kstars.indi] - INDI Server: "2020-08-22T10:55:37: Driver indi_pentax: snooping on SQM.SKY_QUALITY"
[2020-08-22T12:55:37.913 CEST DEBG ][ org.kde.kstars.indi] - INDI Server: ""
[2020-08-22T12:55:37.997 CEST DEBG ][ org.kde.kstars.indi] - INDI Server: "Child process 1763 died"
[2020-08-22T12:55:37.997 CEST DEBG ][ org.kde.kstars.indi] - INDI Server: "2020-08-22T10:55:37: Driver indi_pentax: stderr EOF"
[2020-08-22T12:55:37.997 CEST DEBG ][ org.kde.kstars.indi] - INDI Server: ""
[2020-08-22T12:55:37.998 CEST DEBG ][ org.kde.kstars.indi] - INDI Server: "2020-08-22T10:55:37: Driver indi_pentax: Terminated after #0 restarts."
[2020-08-22T12:55:37.998 CEST DEBG ][ org.kde.kstars.indi] - INDI Server: ""
[2020-08-22T12:55:37.998 CEST CRIT ][ org.kde.kstars.indi] - INDI driver "indi_pentax" crashed!
[2020-08-22T12:55:39.932 CEST INFO ][ org.kde.kstars.ekos] - "Unable to establish:\n+ Pentax DSLR\nPlease ensure the device is connected and powered on."
[2020-08-22T12:55:40.468 CEST DEBG ][ org.kde.kstars.indi] - INDI: Stopping local drivers...
[2020-08-22T12:55:40.468 CEST DEBG ][ org.kde.kstars.indi] - Removing managed driver "Pentax DSLR"
[2020-08-22T12:55:40.468 CEST DEBG ][ org.kde.kstars.indi] - INDIListener: Removing client manager for server localhost @ 7624
[2020-08-22T12:55:40.469 CEST DEBG ][ org.kde.kstars.indi] - INDI server disconnected. Exit code: 0
[2020-08-22T12:55:40.469 CEST DEBG ][ org.kde.kstars.indi] - INDI server disconnected. Exit code: 0
[2020-08-22T12:55:40.469 CEST DEBG ][ org.kde.kstars.indi] - Stopping INDI Driver "indi_pentax"
[2020-08-22T12:55:40.470 CEST DEBG ][ org.kde.kstars.indi] - Stopping INDI Server "localhost" @ "7624"
[2020-08-22T12:55:40.470 CEST DEBG ][ org.kde.kstars.ekos] - Resetting Ekos Manager...
[2020-08-22T12:55:40.473 CEST WARN ][ default] - QSqlDatabasePrivate::removeDatabase: connection 'filter_db' is still in use, all queries will cease to work.
[2020-08-22T12:55:40.473 CEST WARN ][ default] - QSqlDatabasePrivate::addDatabase: duplicate connection name 'filter_db', old connection removed.
[2020-08-22T12:55:40.475 CEST INFO ][ org.kde.kstars.ekos] - "INDI-tjenester stoppet."
7 months 3 weeks ago #58571

Please Log in or Create an account to join the conversation.

  • Posts: 31
  • Thank you received: 1
Maybe try another USB cable... Last night was a little adventure to get the K70 to Work.

1. Rasperry won't boot while k70 is connected

2. Some USB cable crash all CCD driver while connected

When i connect my K70 after booting with a good USB cable everything works as it should.

@drawsacircle

Conclusion... Try another USB cable.
7 months 3 weeks ago #58576

Please Log in or Create an account to join the conversation.

Time to create page: 0.945 seconds