×
INDI Library v1.8.6 Released (21 Aug 2020)

August 2020 release of INDI Library v1.8.6 introduces new drivers while providing fixes and improvements to existing devices and core framework.

Celestron CGX - Not tracking after slew

1 month 3 weeks ago
jws_indi
Senior Boarder
Senior Boarder
Posts: 55
More
Celestron CGX - Not tracking after slew #59353
I have a CGX that I recently updated the firmware on the HC as well to version 7.17.0025 and I will test this out first clear evening I get. Hopefully Friday.

Cheers
Jim

Celestron CGX, QSI683 Astrodon Gen 2 E series LRGB, Ha, OIII, ES102CF, ZWO-ASI178MC, 60mm guide scope, Pegasus Focus Cube 2, Feather Touch Focuser.

Please Log in or Create an account to join the conversation.

1 month 1 week ago
jryd2000
Fresh Boarder
Fresh Boarder
Posts: 1
More
Celestron CGX - Not tracking after slew #60294
I am experiencing the same thing even with my AltAz. I have the NexStar+ HC connected to my NexStar 6SE and everything works fine through the HC and continues tracking fine after manually slewing via the HC. But if I use INDI to manually slew the mount tracking does not resume unless I manually slew again on HC or toggle tracking off/on. Was going to try to hack Celestron GPS driver.

Please Log in or Create an account to join the conversation.

Time to create page: 0.338 seconds