After restarting KStars, I can't get any optical trains to appear in any dropdowns. Only if I go into the optical trains editor, change something, only then do the dropdowns populate. But if I exit KStars and restart it, the dropdowns are empty again.
An expanded view of the optical trains. Ignore the "New Train", it was added by mistake and I can't get rid of it.
Please have the system remember autofocus focus settings with each train, for those with two or more motorized focusers that require totally different settings,
iOptron CEM120 EC2 and CEM25P
Celestron C11 EdgeHD and William Optics Star71
ASI 1600MM Pro, ASI 462MC
Moonlight Litecrawler (C11) and Motorfocus (WOStar71)
LodeStar X2 and ZWO OAG
Nextdome, AAG Cloudwatcher
Same here, I have 4 setups (never too much ), 3 refractors and one reflector. It would be great to keep per setup settings.
And I also have the same problem with the delete button, can't delete the incorrect optical trains inserted, the button is not available , it's not even clickable as described.
(PT) SC@ROS Observatory
TS 6" F4 Newt / Nikon D5500 / GPU CC / Datyson T7M / Arduino Moonlite DC Clone- HEQ5 Pro
Orion 120ST / Explore Scientific 80APO / TSAPO102Q Sextuplet / G2-8300FW5 / ES FF 2" / ASI120MM - Arduino Moonlite DC Clone - Vixen GPD2 www.flickr.com/photos/139335144@N03/
For those where the delete button stays inactive: try selecting a row and press Shift-Enter.
ONTC 10"F4 Newton + FSQ-85 + epsilon-160 + FS-60CB + Dobson Factory 12" Voyage + TSA-120
Avalon Linear + M-zero + AYO II | ASI 6200mm pro + 294mm pro | KStars/INDI on Raspberry Pi 4/Intel NUC
How to submit logs