×

INDI Library v1.9.6 Released (Yesterday)

Bi-monthly INDI Library released with new drivers and bug fixes.

Mac KStars 3.5.7 beta new build -- please test

  • Posts: 178
  • Thank you received: 28
On my MacBookPro, everything is now working fine with kstars-3.5.7-beta3.dmg
- Simulators : no problem
- Real life : Celestron, Microtouch focuser, dome MaxDomeII, and 2 ZWO cameras : no problem
Well done Rob !
4 months 5 days ago #79527

Please Log in or Create an account to join the conversation.

  • Posts: 2705
  • Thank you received: 742
Jean-Claude Excellent, please keep testing and see if there is anything else.

David - I will check and see why dbus might be causing an issue for you
4 months 5 days ago #79528

Please Log in or Create an account to join the conversation.

  • Posts: 2705
  • Thank you received: 742
David, maybe try restarting the computer?  Just a thought.  It looks like dbus got packaged up ok.
The following user(s) said Thank You: David Biggs
4 months 5 days ago #79529

Please Log in or Create an account to join the conversation.

  • Posts: 678
  • Thank you received: 82
Thanks Rob.  Version 3 doesn't kill INDI so good progress.  I will test more tonight.
PS:  I believe the issue with Nexdome ceasing to sync after reaching zero azimuth is still there though.  :(



 

iOptron CEM120 EC2 and CEM25P
Celestron C11 EdgeHD
William Optics Star71
ASI 1600Mm Pro, ASI 462MC
Moonlight motorfocus & Esatto focuser
LodeStar X2 and ZWO OAG
DewBuster
NANO PC-T4
4 months 5 days ago #79533

Please Log in or Create an account to join the conversation.

  • Posts: 25
  • Thank you received: 1
Thanks, that did the trick!
4 months 5 days ago #79534

Please Log in or Create an account to join the conversation.

  • Posts: 25
  • Thank you received: 1
Do we know when the code was pulled from indi-3rdparty to compile this version?
4 months 5 days ago #79535

Please Log in or Create an account to join the conversation.

  • Posts: 74
  • Thank you received: 10
Hi Rob,

I had a bit of clear sky this evening so I tried 3.5.7 (original beta). I run Kstars on my Mac and Indi on a Rpi via Astroberry.
1. All devices connect OK (2 ZWO cameras, ASI EFW, ASI EAF, EQMod Mount, Pegasus PPBA).
2. Polar Alignment worked fine (noted the MF disabled during the PA).
3. Auto-focusing worked as usual.
4. Alignment / Plate solving worked as usual.
5. Scheduler. Loaded a previous sequence but on running, it went to the idle state and got stuck there. All the Job Constraints were on their default values and none should have prevented the sequence from starting. I rebuilt the sequence and tried twice more - same issue. Looking in the log I can see some msgs that might help... "Scheduler failed to register with dbus", "scheduler is stopping..."
Hi Rob,

I had a bit of clear sky this evening so I tried 3.5.7 (original beta). I run Kstars on my Mac and Indi on a Rpi via Astroberry.
1. All devices connect OK (2 ZWO cameras, ASI EFW, ASI EAF, EQMod Mount, Pegasus PPBA).
2. Polar Alignment worked fine (noted the MF disabled during the PA).
3. Auto-focusing worked as usual.
4. Alignment / Plate solving worked as usual.
5. Scheduler. Loaded a previous sequence but on running, it went to the idle state and got stuck there. All the Job Constraints were on their default values and none should have prevented the sequence from starting. I rebuilt the sequence and tried twice more - same issue. Looking in the log I can see some msgs that might help... "Scheduler failed to register with dbus", "scheduler is stopping..."
  

File Attachment:

File Name: log_19-03-27.txt
File Size:406 KB
4 months 5 days ago #79536
Attachments:

Please Log in or Create an account to join the conversation.

  • Posts: 2705
  • Thank you received: 742
David, the indi-3rdParty code should have been pulled today since my build script uses the most recent master of INDI and KStars as the default.
4 months 5 days ago #79537

Please Log in or Create an account to join the conversation.

  • Posts: 2705
  • Thank you received: 742
John, the Scheduler is heavily dependent on dbus, so if dbus is not working, then that would make the scheduler not work properly.  So dbus was not working properly for you?  In this build, I am trying to use the default craft build of dbus instead of using the custom recipe that I made a few years ago.  So if dbus does not work, we may have to bring back my old recipe.
4 months 5 days ago #79539

Please Log in or Create an account to join the conversation.

  • Posts: 25
  • Thank you received: 1
Hi Peter,

Can you send/post a log file for the dome moving across 0 degrees when slaving and I'll have a look.
I do have the Autosync threshold set to 2 degrees in Ekos | Nexdome | Slaving (not 0.5).
Meridian side is Mount.

David
4 months 5 days ago #79540

Please Log in or Create an account to join the conversation.

  • Posts: 678
  • Thank you received: 82
Thanks Dave! I changed the slaving to 2 degrees vs 0.5 and that seemed to see the problem!
I will test over the coming nights and see how it goes. Thanks again for the tip!

iOptron CEM120 EC2 and CEM25P
Celestron C11 EdgeHD
William Optics Star71
ASI 1600Mm Pro, ASI 462MC
Moonlight motorfocus & Esatto focuser
LodeStar X2 and ZWO OAG
DewBuster
NANO PC-T4
4 months 4 days ago #79546

Please Log in or Create an account to join the conversation.

  • Posts: 25
  • Thank you received: 1
Great, I think the Ekos slaving value just needs to be greater than the Nexdome internal dead zone. So if you need more rotation accuracy you can try reducing it to 1.0, or even 0.6. Hope it fixes the issue for you!
4 months 4 days ago #79547

Please Log in or Create an account to join the conversation.

Time to create page: 0.731 seconds