It is possible/probable that this may be due to something missing on build.
This is on a clean install of the latest Raspberry Pi 32bit OS - Bullseye.
I am logging everything and get what is in the attached file, after I select to connect devices.
Losmandy G11 with Gemini 2 controller
QSI 583/683 monochrome camera with filter wheel
Starlight Xpress Lodestar X2 guide camera
Microtouch Focuser controlled using Arduino UNO emulating Feathertouch controller
Raspberry Pi 2GB with Raspberry Pi OS 64bit Buster
Try turning off logging and see if it crashes, particularly Ekos ccd logging. We think we may have tracked an intermittent and very strange crash on indiserver start to this setting.
Losmandy G11 with Gemini 2 controller
QSI 583/683 monochrome camera with filter wheel
Starlight Xpress Lodestar X2 guide camera
Microtouch Focuser controlled using Arduino UNO emulating Feathertouch controller
Raspberry Pi 2GB with Raspberry Pi OS 64bit Buster
Losmandy G11 with Gemini 2 controller
QSI 583/683 monochrome camera with filter wheel
Starlight Xpress Lodestar X2 guide camera
Microtouch Focuser controlled using Arduino UNO emulating Feathertouch controller
Raspberry Pi 2GB with Raspberry Pi OS 64bit Buster