Tonight I tried make Flats... I have added a sequence of Flats calculating the ADU values and then the Darkflats sequence with the specific option.
It calibrates the exposure flats as usual and captures the sequence, but when start the DarkFlats it doesn't warn or wait for cover the telescope as it does with normal Darks sequences... Is this a the correct behavior or a bug?
Those options are now accessed via a button on the right half of the window, towards the bottom. I don't have it open to provide the exact name
120 MM Skywatcher Esprit + Celestron CGX, ZWO ASI 224MC guiding, Pegasus FocusCube+PPBA
Nikon Z7 8256 x 5504 4.34 um. Triad Ultra Quad NB Filter
1) MeLE Quieter3C 8G Ubuntu-mate 22.04.1 2) Odroid-N2. 3) StellarMate RPI4 8G
The good, the bad, the ugly at sciencedowneast.no-ip.ca/zenphoto/
FWIW, I'm running KStars 3.6 on an M1 Mac Studio under macOS 12.5. I haven't experienced crashes on launch or otherwise. I'm using a remote RPi running the lates StellarmateOS to control the mounts remotely from the Mac. I haven't had clear nights since the upgrade to 3.6 but I have been able to test my mounts and things seem to work fine. I'll report back if I find any problems after a full blown imaging session.
Celestron EdgeHD 11/Moonlite LiteCrawler/iOptron CEM120EC2/ASI6200MM Pro
Radian 61/Radian Focuser/iOptron CEM26EC/ASI6200MC Pro
OAG: ZWO OAG-L/ASI174MM or ASI290MM
ZWO EFW (7x2")
PegasusAstro Ultimate Powerbox V2
Raspberry Pi 4, 8GB/StellarmateOS
I'm getting a build error on Raspberry Pi 4 4GB, Ubuntu MATE 22.04 64 bit trying to build 3.6.0, using Nou's script. The dependencies all appear to be installed. I've also tried to install via the PPA but it has the ZWO camera driver restart problem.