Hi, I´ve also had the asi driver restarting problem on rapsberryPI4 and ubuntu 20.04. The problem was gone after building the app and drivers from source.
Now everything seems to work except alignment, it crashes the app when I try to plate solve. I get the message changing to filter... and then crashes after a few seconds.
Hi, I've also had the Indi asi driver restarting problem. After building everything from source It began to work, Focus works, Capture works, but alignment crashes ekos and kstars. It shows the message for changing filter and right after that it crashes. Tried with the CCD simulator and it worked.
Any ideas? thanks
My experience with flats is the same, no pause to ensure telescope is covered before carrying on. My work-around was aborting the sequence after the last flat was saved, covering the telescope (in my case removing the flat panel first), and restarting from the first dark flat sequence entry. Not ideal, must be paying attention, but workable. Now with 3.6.0 I can't even get this far. (still working on what the issues are...)
Note that I just updated the DMG for KStars 3.6.0 on MacOS. The previous one was built just before I went on vacation and I had an issue with my script and couldn't fix it before I left so in the release they used the 3.6.0 built by craft. There were some issues with it and this week after I came back I worked on fixing my script and then fixing those issues. Hopefully the following are fixed:
1. The issue with running KStars below MacOS 10.15. My script is set to build for 10.13 just as it had in the past. So hopefully this new dmg should work just like KStars 3.5.9
2. The strange Find Dialog MacOS crash issue might be fixed. This is one I have been working on the last few days.
3. Any other bug fixes that have gone into the stable KStars 3.6.0 in the last couple of weeks.
In my hands KStars 360 gives a lot of problems on macOS Mojave and Big Sur.
It keeps bouncing on the Dock and doesn't open.
THEN, it is impossible to open KStars 359 : it keeps bouncing as well.
However it is possible to open KStars 359 again after a restart of the Mac.
Celestron EdgeHD 11 on Celestron CGE Pro
Celestron OAG and MicroTouch Autofocuser
ASI2600MC Pro + ASI174MM
Yesterday I found the issue for the startup crash, it is a file called asteroids.dat in the data directory. I contacted the person who made the change and he is working on a solution. Sorry about the issue.
I was able to download the latest Beta 3.6.1 release (2022-08-25T18:24:31Z) and so far I can report that it launches (no more beachball of death), connects to all my gear, and doesn't crash when you try to find an object. I won't be able to run a full test trying to image a target for a night or two but wanted to report the progress.
Celestron EdgeHD 11/Moonlite LiteCrawler/iOptron CEM120EC2/ASI6200MM Pro
Radian 61/Radian Focuser/iOptron CEM26EC/ASI6200MC Pro
OAG: ZWO OAG-L/ASI174MM or ASI290MM
ZWO EFW (7x2")
PegasusAstro Ultimate Powerbox V2
Raspberry Pi 4, 8GB/StellarmateOS
Ok, two big fixes were just pushed. A better solution for the Find Dialog bug and also a fix for the startup crash that a bunch of people were experiencing that was caused by asteroids.dat I just rebuilt the dmg here: