for some time, now most of the time, the "capture" stuck after a "light" task. Status of the next task stuck at "Preparing..." , "Idle" status.
I can stop the capture process, then start it again, but it's not working better.
Even some time, stop capture, did Kstars crash.
Here are some examples of debug logs
<code>[2023-02-04T09:11:10.494 CET INFO ][ org.kde.kstars.ekos.capture] - "Captured /home/spiritchaser/Pictures/test2/Light/test2_Light_10_secs_010.fits"
[2023-02-04T09:11:10.503 CET DEBG ][ org.kde.kstars.ekos.capture] - Preparing capture job "/home/spiritchaser/Pictures/test2/Flat/test2_Flat_10_secs" for execution.
[2023-02-04T09:11:10.512 CET INFO ][ org.kde.kstars.ekos.capture] - "Job requires 10,000-second images, has 0/10 frames captured and will be processed."
[2023-02-04T09:11:23.799 CET INFO ][ org.kde.kstars.indi] - SnapCap : "[INFO] Cover closed. "
[2023-02-04T09:11:23.804 CET DEBG ][ org.kde.kstars.indi] - ISD:Telescope: Parking...
[2023-02-04T09:11:23.849 CET INFO ][ org.kde.kstars.indi] - EQMod Mount : "[INFO] Telescope already parked. "
[2023-02-04T09:13:42.234 CET DEBG ][ org.kde.kstars.indi] - ZWO CCD ASI294MC Pro : "[DEBUG] Toggle Logging Level -- Driver Debug "
[2023-02-04T09:13:50.764 CET DEBG ][ org.kde.kstars.indi] - ZWO CCD ASI294MC Pro : "[DEBUG] Toggle Logging Level -- Messages "
</code>
Light's capture is finished at 09.11.10, then flat's capture should start.
from 09.11.23 capture is stucked...then i tried to activate more debug...
<code>2023-02-04T09:17:25.664 CET INFO ][ org.kde.kstars.indi] - SnapCap : "[INFO] Debug is disabled. "
[2023-02-04T09:17:25.889 CET INFO ][ org.kde.kstars.ekos] - "SnapCap" is connected and ready.
[2023-02-04T09:17:25.967 CET WARN ][ default] - QObject::connect: signal not found in ISD::Camera
[2023-02-04T09:17:26.036 CET WARN ][ default] - QObject::connect: signal not found in ISD::Camera
[2023-02-04T09:17:26.055 CET INFO ][ org.kde.kstars.ekos] - "SnapCap Dust cap is online."
[2023-02-04T09:17:26.056 CET INFO ][ org.kde.kstars.ekos] - "SnapCap Light box is online."
[</code>
those warnings recorded 6 min later are perhaps meaningfull.
I use Indi 2.0.0 with Kstars 3.6.3. on Ubuntu
I use an ASI 294MC Pro.
Thanks four your attention and help.
Regards.
Arnaud.
Last edit: 1 year 1 month ago by Arnaud. Reason: a screenshot
Hi all,
problem looks connected with "park mount" status in the "dark & flat frames automatic calibration options" dialog box.
If i select "park mount", then as in my case, my mount is already mount, Flat task never starts...
If i unpark the mount, then select park mount, the flat task doesn't start, until i manually park the mount using park button of the mount tab.
Well...it behave as the "park mount" check box was no more connected to the mount...
but why...??