I'm able to get to work the Orion SSAG under Windows 10 with PHD2 succesfully. But when I'm trying Ekos, under Windows 10, to connect to the SSAG, it won't connect. There's this message: 2019-06-02T15:34:54 ASCOM ASCOM_SSAG Camera is disconnected.
Cables are not the issue since PHD2 works fine with the camera. I know a workaround to this would be to work with PHD2, but I want to guide from Ekos. INDI server control panel is running well also and is using the ASCOM driver downloaded from Orion's website. By the way, I also tried with the QHY5 driver for windows without success.
A similar situation happens with the Microtouch focuser: Ekos displays the message 2019-06-02T15:54:14 ASCOM MicroTouchServer Focuser1 is disconnected.
It works flawlessly under WIndows 10 with the same ASCOM driver from Sequence Generator Pro. It also works with Ekos under linux.
Please find the log attached.
I'd really like this setup (Orion SSAG, Microtouch focuser) to work from Windows, since it is my main operating system from this machine. The CEM60 mount and the ZWO 071 Pro work without issues from windows.
Interesting. I personally encountered issues with my Orion SSAG on windows 7 because I could not find a 64bit compatible ASCOM driver for it. And it appeared support for it is not happening.
INDI/KStars on Raspberry Pi 4, 4gb
Raspbian Buster with AstroPi3 script configuration
Skywatcher HEQ5 Pro Mount
Canon 600D Camera
Orion SSAG/ASI120mm @280mm Guide Scope
Waveshare Stepper Motor Board - DIY Focuser
Adafruit GPS Module
Generic Bluetooth Joystick.
Startech 7 port powered USB Hub.