×
INDI Library v1.8.1 Released (09 Sep 2019)

Monthly maintenance release INDI v1.8.1

ST4 Relays NC for guiding

4 months 1 week ago
mjnelson
Fresh Boarder
Fresh Boarder
Posts: 4
More
Topic Author
ST4 Relays NC for guiding #40701
My telescope expects normally closed relays for operation on the guide inputs. Is there
any control over the ST4 port in the Ekos guide module for NC vs. NO operation?

Thanks,
Matt
The following user(s) said Thank You broadcastyourseb

Please Log in or Create an account to join the conversation.

3 months 3 weeks ago
broadcastyourseb
Expert Boarder
Expert Boarder
Posts: 118
More
ST4 Relays NC for guiding #41266
Hello Matt,

I don't think so. It's an hardware incompatibility. You have to create you're own electronic converter. Between your mount and your camera guide.

Sébastien.

Linux Mint 19 Cinnamon using PPA for latest KStars-bleeding and INDI
Raspberry Pi 3 B+ with StellarMate
Atik 314E - ASI120M - CG5 with Celestron C9.25

Please Log in or Create an account to join the conversation.

3 months 3 weeks ago
mjnelson
Fresh Boarder
Fresh Boarder
Posts: 4
More
Topic Author
ST4 Relays NC for guiding #41282
I had some Linux guiding software a few years ago which allowed the user to
set the polarity of the ST-4 switches. I was hoping that could be added to either
the camera device driver or as an option in the built in guiding for Ekos.

Thanks,
Matt

Please Log in or Create an account to join the conversation.

Time to create page: 0.570 seconds