The other day I finally had a chance to snap M33 for a couple of hours. After my image session I wanted to shot some flats, dark flats and bias frames and then I suddenly became uncertain about the auto focuser, so I disconnected that from Ekos before taking the calibration frames.
So my simple question is:
Is the auto focus module suspended during flats, bias and darks?
Anders
SkyWatcher ED80 Pro
Skywatcher HEQ5 Pro with Rowan Belt Mod with EQDIR cable
ZWO ASI294MC Pro imaging camera
QHY5L-II-C guide camera on 50mm guidescope
DeepSkyDad AF3 autofocuser
Raspberry Pi 4 4GB running Kstars/Ekos