Gain access to the box running the service, same as how you get to issue the commands to start and stop and get status for the service.
This is usually by either
- sitting at box with monitor and keyboard
- remote access over the network
If you are using a keyboard and monitor at the computer running the service, start a terminal and edit the file with an editor, for instance
$ sudo nano /path/to/file
nano is a simple editor with prompts.
Make the changes and save the file
You can use any editor you like.
If you are remote from the computer running the service, use ssh (putty on windows) to get terminal access and proceed as before. You can also use a remote desktop instead of ssh if you have that set up.
Hi to all,
I've assembled my weather station on an arduino uno With dht sensor, IR sensor and water sensor and ll works fine on kstars.
My only problem is that I can't find the way to use the water sensor output to automatically close he roof because the rain data are not between the weather parameters shown on the dome tab.
Can anyone help me?
Ekos running on RPI4
Telescope apo triplet 90/600
Camera Canon Eos 1100D
Mount Skywatcher HEQ5 pro
Guidecamera Magzero 5M
Focuser Arduino clone of Moonlite
The INDI driver is ready, the integration into the web page is missing.
With this upcoming release, I added the option for rain drop detectors, i.e. as soon as first rain drops are recognized, the weather status changes to ALARM so that for example the observatory controller could close the roof.
TSA-120 + FSQ-85 + ONTC 10"F4 Newton (+ epsilon-160 on Japan trip) | Avalon Linear + M-zero | ASI 1600mm pro + 6200mm pro | KStars/INDI on Raspberry Pi 4/Intel NUC