×

INDI Library v1.9.7 Released (29 Jul 2022)

Bi-monthly INDI Library released with new drivers and bug fixes.

Weather radio don't want connect

  • Posts: 50
  • Thank you received: 2
Hi G_Gagnon,

if you want to see the web page from another client, you must to open the port 80 in your router (internet router) for your server.
for exemple, my server is on a tinkerbaord and his name is nafabox. In my internet box I've open Nat rules 80 on nafabox!!
2 years 2 months ago #57163

Please Log in or Create an account to join the conversation.

  • Posts: 257
  • Thank you received: 54
Bonjour Olivier,

The two machines are on the same network (home) thus I assume that I do not have to do NAT or port forwarding. The weather radio being run on a StellarMate machine, I can access the StellaMate Control Panel without problem, so it's not a port 80 issue. Any other clues?

Merci.
2 years 2 months ago #57166

Please Log in or Create an account to join the conversation.

  • Posts: 50
  • Thank you received: 2
Do you can to try the NAT. if Ok you will know ;)
In my tinker, same local, I had must to open port!
2 years 2 months ago #57167

Please Log in or Create an account to join the conversation.

  • Posts: 50
  • Thank you received: 2
Explication for my tinker: Apache2 is on the port 80.
if you go on the web and put RL:
http://ip_local
you must to see the apache2 webpage.
if you test from another PC what do you see?
2 years 2 months ago #57168

Please Log in or Create an account to join the conversation.

  • Posts: 257
  • Thank you received: 54
On the weather radio machine, if I put http://localhost in the browser, I get the apache2 webpage, as you mention. On another local machine, http://ipaddress gives me the Stellar Mate Dashboard. I thus assume that Stellar Mate redirects port 80 to another port if accessed from outside. If I can figure out how to disable Dashboard this may solve the issue.

I will try to figure it out.

Merci.
2 years 2 months ago #57173

Please Log in or Create an account to join the conversation.

  • Posts: 50
  • Thank you received: 2
OK.... I had have the same pb with the nafabox project!
So, I had must to uninstall ngnix & apache2, then I had reinstalled apache2 and after it was ok!
2 years 2 months ago #57175

Please Log in or Create an account to join the conversation.

  • Posts: 257
  • Thank you received: 54
Uninstalled and re-installed apache2 but no change. I will ask the Stellar Mate forum if there may be conflicts between the Dashboard and apache2.
2 years 2 months ago #57177

Please Log in or Create an account to join the conversation.

  • Posts: 50
  • Thank you received: 2
do you have ngnix installed?
2 years 2 months ago #57178

Please Log in or Create an account to join the conversation.

  • Posts: 257
  • Thank you received: 54
No ngnix on Stellarmate, so it is not part of the problem.
2 years 2 months ago #57182

Please Log in or Create an account to join the conversation.

  • Posts: 981
  • Thank you received: 296
Just a thought: is a StellarMate device really the right place running the weather radio web server? Or do you have your StellarMate running 24x7 - which should be the typical mode for a web server of a meteo station?
TSA-120 + FSQ-85 + ONTC 10"F4 Newton (+ epsilon-160 on Japan trip) | Avalon Linear + M-zero | ASI 1600mm pro + 6200mm pro | KStars/INDI on Raspberry Pi 4/Intel NUC
2 years 2 months ago #57271

Please Log in or Create an account to join the conversation.

  • Posts: 183
  • Thank you received: 23
so glad you asked the question, it's not clear from the install docs that I should be adding an additional RPi *just* for the web server to not?

to your earlier discussion with @knro in another thread, I feel like the Observatory control systems should be independent from the Telescope/imaging control system, much like Viking and Voyager do - which implies, ideally, two RPis, one of which could host WeatherRadio, Indiunio/relay control, sensors, etc and the other that manages image acquisition.

sorry - this is a thread hi-jack topic, - if worth talking about we should move to another thread. Speaking of which, I will suggest to the web admin team that we should have a section for DIY/Open-source hardware that's INDI compatible as some of these topics are really not INDI per se but related.
GSO Ritchey Chretien 12" Truss | SkyWatcher ED72
ZWO ASI 2600MC Pro, 1600MM Pro, ASI290MM and ASI224MC all-sky | ZEO EFW | ZWO OAG
Moonlite V2.5 CSL | DeepSkyDad AF3
EQ8-R | Paramount ME & MX
Nexdome | SQM LE | AAG CloudWatcher and Solo | Ultimate Power Box V2 | Spike-a-Flat
Angry missus
2 years 2 months ago #57272

Please Log in or Create an account to join the conversation.

  • Posts: 257
  • Thank you received: 54
I had the StellarMate already available so I configured it to control my observatory. But you are right, I will re-install everything on a non-StellarMate machine and see where it gets me.
2 years 2 months ago #57286

Please Log in or Create an account to join the conversation.

Time to create page: 0.969 seconds