×

INDI Library v2.0.6 is Released (02 Feb 2024)

Bi-monthly release with minor bug fixes and improvements

bug Starlight Filter Wheel @ Stellarmate 1.7

  • Posts: 9
  • Thank you received: 0
Hello. I have a starlight xpress filter wheel with 7 filters carousel. With the new 64bit stellarmate in the ekos menus only the first 5 filters are displayed.





2 years 3 days ago #81740
Attachments:

Please Log in or Create an account to join the conversation.

Please provide logs so we can check it out: www.indilib.org/individuals/logs-howto.html
1 year 11 months ago #81863

Please Log in or Create an account to join the conversation.

  • Posts: 6
  • Thank you received: 0
I have the same problem with my ASI EFW. I have 7 filter locations but only 5 appear on the list.
Thanks,
Mike
1 year 3 months ago #89101

Please Log in or Create an account to join the conversation.

Thanks for the report, logs are still required to investigate this.
1 year 3 months ago #89103

Please Log in or Create an account to join the conversation.

  • Posts: 6
  • Thank you received: 0
I attached the log file and a screen shot. The screen shot shows the INDI control panel with only 5 available filters. In the log file you'll see I took 3 images, one is slot 4 the red filter, the next is slot 6 which has no name, and finally slot 3 which is a blue filter.
Thank you!
1 year 3 months ago #89106
Attachments:

Please Log in or Create an account to join the conversation.

This is ASI EFW and not Starlight filter wheel??
1 year 3 months ago #89117

Please Log in or Create an account to join the conversation.

  • Posts: 6
  • Thank you received: 0
Yes, that's correct. It's a 7 position ASI EFW.
1 year 3 months ago #89119

Please Log in or Create an account to join the conversation.

Ok the topic is about Starlight. At any rate, for your case, go to INDI Control Panel --> ASI EFW --> Options --> Configuration --> Purge and then stop & restart the profile.. does this help?
1 year 3 months ago #89120

Please Log in or Create an account to join the conversation.

  • Posts: 6
  • Thank you received: 0
Ok. Weather is not good now. I'll try it a little later. Thank you.
1 year 3 months ago #89121

Please Log in or Create an account to join the conversation.

This doesn't require any sky, you can test it indoor.
1 year 3 months ago #89122

Please Log in or Create an account to join the conversation.

  • Posts: 6
  • Thank you received: 0
My scope is under the Telegizmo 365.
1 year 3 months ago #89123

Please Log in or Create an account to join the conversation.

  • Posts: 6
  • Thank you received: 0
Awesome! You fixed it!
Thank you!
1 year 3 months ago #89132
Attachments:

Please Log in or Create an account to join the conversation.

Time to create page: 0.407 seconds