Is there some configuration (udev rules...) to tweak with to use an atik filter wheel (see output of dmeg below) ?
I tried it on 3 machines to no avail using
on my x64 laptop :
[ 3712.909208] usb 1-3: new full-speed USB device number 13 using xhci_hcd
[ 3713.056562] usb 1-3: New USB device found, idVendor=0403, idProduct=af01
[ 3713.056568] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3713.056571] usb 1-3: Product: Atik Filter Wheel
[ 3713.056574] usb 1-3: Manufacturer: Atik Instruments
[ 3713.056576] usb 1-3: SerialNumber: FWSJGFO9
Then, on Connect from kstars :
[ 3759.240388] indi_atik_wheel: segfault at c ip 000000000040ea8b sp 00007ffdbf4cd240 error 4 in indi_atik_wheel[400000+55000]
I had to symlink cftsio.so.2 to cfitsio.so.5 and linova 14 to libnova16 to have it starting so
the segfault might be related.
on my raspberry :
dmesg |grep -i atik :
of course, on Connect from kstars nothing happened.
On an oid xu4 :
after connectingthe wheel on usb : dmesg :
[ 42.136722] [c0] usb 3-1.2: new full-speed USB device number 5 using xhci-hcd
and thats all. Of course on Connect from kstars nothing happened.
it may be not an indi problem, at this point it could be anything (except hardware, it works under windows). What really puzzles me is why this code is not open : come on atik, we are talking about a basic stepper motor software driver, there are gazillions of these things hanging around !