×

INDI Library v2.0.6 is Released (02 Feb 2024)

Bi-monthly release with minor bug fixes and improvements

Initialization of Sesto Senso

  • Posts: 245
  • Thank you received: 56
Great to hear it works. Should have some clear skys here tonight so hopefully I can give it a real test.

I don't know when it will be added to the stable build. Probably best to ask Jasem when that happens.
4 years 9 months ago #40235

Please Log in or Create an account to join the conversation.

Probably by the end of June.
4 years 9 months ago #40236

Please Log in or Create an account to join the conversation.

  • Posts: 69
  • Thank you received: 5
Thank you for this great update.

I have only just noticed that the indi driver does not show the temperature sensor readout anywhere.
Is there any way that can be included?
4 years 9 months ago #40241

Please Log in or Create an account to join the conversation.

  • Posts: 24
  • Thank you received: 3

Replied by Dahu on topic Initialization of Sesto Senso

I can confirm that this new flavour of the driver works very well, including the initialization procedure.
I noticed the temperature is only displayed if the sensor is plugged, which seems logical. And it is updated every 10 seconds or so.
Thanks a lot for that great work.
4 years 9 months ago #40244

Please Log in or Create an account to join the conversation.

  • Posts: 69
  • Thank you received: 5
Where is the temperature displayed?

Can you share a screen capture?

That's why I posted the previous post.
4 years 9 months ago #40249

Please Log in or Create an account to join the conversation.

  • Posts: 24
  • Thank you received: 3

Replied by Dahu on topic Initialization of Sesto Senso

Here is the requested screenshot.
The following user(s) said Thank You: David Thompson
4 years 9 months ago #40268
Attachments:

Please Log in or Create an account to join the conversation.

  • Posts: 140
  • Thank you received: 1

Replied by Rene on topic Initialization of Sesto Senso

Hi all,

Has this update been released yet? I just upgrade KStars to 3.3.1 & INDI Library to 1.7.9 yet the driver version for the Sesto still shows driver version 1.2 and my controls don't look like the above. Am I missing something?

Regards,

Rene
4 years 9 months ago #40545

Please Log in or Create an account to join the conversation.

  • Posts: 245
  • Thank you received: 56
Its not in the regular build yet but if you switch to the nightly build you can get it. The instructions for the nightly build can be found a couple of pages back in this thread (www.stellarmate.com/support.html?view=kb&kbartid=5 ). Should be in the regular build around the end of this month.
Last edit: 4 years 9 months ago by Rishi Garrod.
4 years 9 months ago #40546

Please Log in or Create an account to join the conversation.

Time to create page: 0.653 seconds