Okay, I just made a commit that should fix that.

Thanks Kevin

Hello Kevin is possible to compile software focuser for indigo driver?

www.indigo-astronomy.org/hardware.html
I wait your response.
Thank.
Ettore

I have no idea, I never tried. But Indigo is compatible with INDI drivers (or so I'm told). But I'm traveling this week, so I won't be able to do any work on it until I'm back home.

It's not exactly compatible, but I'm waiting for it to come back.
Ettore

Hi Kevin, I'm new to RPi4/Linux/Debian, and would appreciate some help installing this driver - it keeps coming up with error message
stellarmate@stellarmate:~ $ cd indi-wmh-focuser
stellarmate@stellarmate:~/indi-wmh-focuser $ cd build
stellarmate@stellarmate:~/indi-wmh-focuser/build $ cmake -DCMAKE_INSTALL_PREFIX=/usr ..
make
sudo make install
-- The CXX compiler identification is unknown
CMake Error at CMakeLists.txt:7 (PROJECT):
No CMAKE_CXX_COMPILER could be found.

Tell CMake where to find the compiler by setting either the environment
variable "CXX" or the CMake cache entry CMAKE_CXX_COMPILER to the full path
to the compiler, or to the compiler name if it is in the PATH.


-- Configuring incomplete, errors occurred!
See also "/home/stellarmate/indi-wmh-focuser/build/CMakeFiles/CMakeOutput.log".
See also "/home/stellarmate/indi-wmh-focuser/build/CMakeFiles/CMakeError.log".
make: *** No targets specified and no makefile found. Stop.
make: *** No rule to make target 'install'. Stop.
stellarmate@stellarmate:~/indi-wmh-focuser/build $

Any help appreciated
Thanks, Tom

Sorted with the sudo command

Hi Kevin,

So far I have been using the waveshare motor head driver on a TS refractor and have adapted the NEMA 14 stepper motor to the 10:1 fine drive. This brings me with about 1240 steps in the area of a good focus before I start the autofocus.
I would now like to use a mirror telescope and can probably only connect the motor to the coarse drive, since the 1:10 fine drive has a very thin shaft (2.4mm) for which I have not found a suitable coupling. Is this combination suitable to achieve a good autofocus? In case not, is there eventually another possibility (different motor)?

Thanks
Kurt

Hi Kurt,

I've only ever attached my stepper motor to the fine focus shaft, never the course focus, so I don't have any direct experience. But I know some people use stepper motors with built-in reduction gearing, and attach to the course focus shaft. The gearing will add some backlash, but at least some of the autofocus algorithms (linear, for example) compensate for backlash by always approaching focus from one direction. So I would recommend using linear algorithm with a geared stepper.

-- Kevin

I drive the coarse focus knob witg a comically small stepper motor with a 50:1 gear box and and 3D printed worm gear for more reduction. Works very well.
I found driving my (cheap) fine focus knob was less reliable.

Thank you both for your reply. I want to use a nema 17 stepper motor with built-in 20:1 gear connected to the coarse focus knob.

Kurt

Is the module waveshare is compatible with Orange PI 5 Plus?
I made the request to the parent company but the answer was: we don't know

www.orangepi.org/html/hardWare/computerA...range-Pi-5-plus.html
Regards
Ettore