I have recently upgraded my setup.

Gem 45
Edge 8HD
ZWO 294MC
ZWO 174MM Mini guide cam for Celestron OAG
Pegagus Ultimate PowerBox
RPi 4 with Stellarmate
Pegagsus Focus cube.
Dew Strips plus a heated dew shield when imaging.
Apple Airport express

All power from a single power supply providing power to the Ultimate PowerBox.
The RPi has a wired connection to an Airport Express.

I now run Kstars/ EKOS and Indi on the RPi. 

I can remove the losmandy plate on top of the scope and put it on my Esprit 100.








 

 

I envy you for your dark skies!  How far to the next major town?

Just finished my project on stationary observatory setup...

 

 

 

 

 

 

 

 

 

Mohamed - this is very good!
I wish I could put a thing like this in my yard but I can't - its' small and obscured by trees.
I keep my scope semi permanently on the garage roof - have to climb there every session to uncover/cover and turn on/off.

What's that thing on a tripod covered with snow?

A weather station?

Hi Max, It is my DIY Allsky camera
Its public link is allskycam.mhammady.info/01/

It helps me in planning (and weather)

No, it is my all-sky cam. My weather station is still WIP. didn't get enough free time lately

Hey! What's your all sky camera setup? Was looking to make one.

This is the allskycam I did

www.thomasjacquin.com/make-your-own-allsky-camera/

Hi community!Here is my setup:Camera: canon600daimaging-scope: LACERTA 72mm FPL-53 ED-APOMount: iexos100pmceightGuide: asi120mc-s SVBONY Mini 135Brain: RPi 4 4GB with Stellarmate

This my setup.

I replaced the original HEQ5 tripod with my diy aluminum stand. It allows an easier horizontal adjustment, a better orientation to the north and carries all accessories. The second image shows my Raspi setup with my diy raspy housing (quick and dirty!) carrying beside the raspy also a waveshare motor HAT board which is driven by Kevin Ross' driver and a temperature controlled fan . The focuser is driven by a NEMA 14 stepper motor. The 2nd image also shows my diy dewheater. I am planning to make it temperature controlled soon. The whole rig is powered by a 12V/6A power supply attached to the stand.