I can't get my Canon 1100D to play nice with Indi after 0.9.8. When connecting the camera the light besides Connect in the ekos client turns yellow but never connects:
It could connect before - although the bulb mode didn't work. Im running the server on raspberry pi. I have tried it with libghoto2 2.4.2, 2.5.2 and 2.5.4 all with same result.

My client doesn't say anything.

This is was my server is saying:
pi@raspberrypi ~ $ indiserver -vv -m 1000 indi_gphoto_ccd
2014-03-24T19:39:38: startup: indiserver -vv -m 1000 indi_gphoto_ccd
2014-03-24T19:39:38: Driver indi_gphoto_ccd: pid=3072 rfd=3 wfd=6 efd=7
2014-03-24T19:39:38: listening to port 7624 on fd 4
2014-03-24T19:39:38: Driver indi_gphoto_ccd: sending <getProperties version='1.7'/>

2014-03-24T19:39:38: Driver indi_gphoto_ccd: read <getProperties device='Telescope Simulator' name='EQUATORIAL_EOD_COORD'>
2014-03-24T19:39:38: Driver indi_gphoto_ccd: snooping on Telescope Simulator.EQUATORIAL_EOD_COORD
2014-03-24T19:39:38: Driver indi_gphoto_ccd: read <defSwitchVector device='GPhoto CCD' name='CONNECTION'>
2014-03-24T19:39:38: Driver indi_gphoto_ccd: read <defTextVector device='GPhoto CCD' name='DRIVER_INFO'>
2014-03-24T19:39:38: Driver indi_gphoto_ccd: read <defSwitchVector device='GPhoto CCD' name='CONFIG_PROCESS'>
2014-03-24T19:39:38: Driver indi_gphoto_ccd: read <defTextVector device='GPhoto CCD' name='SHUTTER_PORT'>
2014-03-24T19:40:09: Client 0: new arrival from 192.168.0.16:54343 - welcome!
2014-03-24T19:40:09: Client 0: read <getProperties device='' name=''>
2014-03-24T19:40:09: Driver indi_gphoto_ccd: queuing responsible for <getProperties device='' name=''>
2014-03-24T19:40:09: Driver indi_gphoto_ccd: sending <getProperties version="1.7"/>

2014-03-24T19:40:09: Driver indi_gphoto_ccd: read <defSwitchVector device='GPhoto CCD' name='CONNECTION'>
2014-03-24T19:40:09: Client 0: queuing <defSwitchVector device='GPhoto CCD' name='CONNECTION'>
2014-03-24T19:40:09: Driver indi_gphoto_ccd: read <defTextVector device='GPhoto CCD' name='DRIVER_INFO'>
2014-03-24T19:40:09: Client 0: queuing <defTextVector device='GPhoto CCD' name='DRIVER_INFO'>
2014-03-24T19:40:09: Driver indi_gphoto_ccd: read <defSwitchVector device='GPhoto CCD' name='CONFIG_PROCESS'>
2014-03-24T19:40:09: Client 0: queuing <defSwitchVector device='GPhoto CCD' name='CONFIG_PROCESS'>
2014-03-24T19:40:09: Driver indi_gphoto_ccd: read <defTextVector device='GPhoto CCD' name='SHUTTER_PORT'>
2014-03-24T19:40:09: Client 0: queuing <defTextVector device='GPhoto CCD' name='SHUTTER_PORT'>
2014-03-24T19:40:09: Driver indi_gphoto_ccd: read <defSwitchVector device='GPhoto CCD' name='DEBUG'>
2014-03-24T19:40:09: Client 0: queuing <defSwitchVector device='GPhoto CCD' name='DEBUG'>
2014-03-24T19:40:09: Driver indi_gphoto_ccd: read <defSwitchVector device='GPhoto CCD' name='SIMULATION'>
2014-03-24T19:40:09: Client 0: queuing <defSwitchVector device='GPhoto CCD' name='SIMULATION'>
2014-03-24T19:40:09: Driver indi_gphoto_ccd: read <defTextVector device='GPhoto CCD' name='SHUTTER_PORT'>
2014-03-24T19:40:09: Client 0: queuing <defTextVector device='GPhoto CCD' name='SHUTTER_PORT'>
2014-03-24T19:40:09: Client 0: sending <defSwitchVector device="GPhoto CCD" name="CONNECT
2014-03-24T19:40:09: Client 0: sending <defTextVector device="GPhoto CCD" name="DRIVER_IN
2014-03-24T19:40:09: Client 0: sending <defSwitchVector device="GPhoto CCD" name="CONFIG_
2014-03-24T19:40:09: Client 0: sending <defTextVector device="GPhoto CCD" name="SHUTTER_P
2014-03-24T19:40:09: Client 0: sending <defSwitchVector device="GPhoto CCD" name="DEBUG"
2014-03-24T19:40:09: Client 0: sending <defSwitchVector device="GPhoto CCD" name="SIMULAT
2014-03-24T19:40:09: Client 0: sending <defTextVector device="GPhoto CCD" name="SHUTTER_P
2014-03-24T19:40:09: Client 0: read <enableBLOB device='GPhoto CCD' name=''>
2014-03-24T19:40:09: Driver indi_gphoto_ccd: queuing responsible for <enableBLOB device='GPhoto CCD' name=''>
2014-03-24T19:40:09: Driver indi_gphoto_ccd: sending <enableBLOB device="GPhoto CCD">
Also
</enableBLOB
2014-03-24T19:40:10: Client 0: read <newSwitchVector device='GPhoto CCD' name='CONNECTION'>
2014-03-24T19:40:10: Driver indi_gphoto_ccd: queuing responsible for <newSwitchVector device='GPhoto CCD' name='CONNECTION'>
2014-03-24T19:40:10: Driver indi_gphoto_ccd: sending <newSwitchVector device="GPhoto CCD" name="CONNECT

Please test again, but this time go to Options tab, enable debug & logging, and logging to "File". Select all the options under logging. Try to connect, and if that fails, just send me the log (its location is reported in INDI Control Panel).