INDI Server using Linux Subsystems for Windows #33755
I finally got around to trying this out. I started with the Avalon mount which for me is on COM7.
I first did an apt-get install indi-full, then started indiserver.
To get access to the COM port I had to chmod 666 /dev/ttyS7
Then fired up Ekos (and PHD2) and connected to the mount, slewed, parked etc...
I also installed astrometry.net and ansvr and got it 90% working from the Ekos alignment module. That is it solved an image behind the scenes but the ansvr Jnow converter failed (it was compiled for Cygwin). I've reached out to Andy to see if something can be done so fingers crossed.
So what we need now is either libusb support or some way to bridge across to Windows
INDI Server using Linux Subsystems for Windows #33757
When you chmod a tty device, it will be reset when you connect the mount again. A better way is to make sure that your Linux user is in the appropriate group. This very likely is the group dialout but I am not 100% sure. Please do an