×

INDI Library v2.0.6 is Released (02 Feb 2024)

Bi-monthly release with minor bug fixes and improvements

New Raspberry pi 4 anounced

  • Posts: 407
  • Thank you received: 74
Haven't tried it on RPI4 but i used this version which includes KDE on RPI3b+ and my 5ghz Wifi problem disappeared but it wasn't very stable then. It now runs on RPI4 as well as RPI2,3,3B+ if someone cares to try it and there is an image ready to download.

NOTE on RPI4 it used LXDE not KDE

raspex.exton.se
RPI3 Ubuntu 16.04 / AMD desktop Kstars under Ubuntu 16.04 Mounts :azeq6 ,SWAZGoTo

RPI3 Fedora testing out on AMD desktop Fedpra 28 - running kstars 2.9.4 , Indilib 1.7.4 ?????
Last edit: 4 years 6 months ago by Clive Stachon.
4 years 6 months ago #42872

Please Log in or Create an account to join the conversation.

  • Posts: 407
  • Thank you received: 74
Instructions to create KDE Desktop version on RPI4 - Not tried them

www.reddit.com/r/kde/comments/c9skij/has..._the_raspberry_pi_4/
RPI3 Ubuntu 16.04 / AMD desktop Kstars under Ubuntu 16.04 Mounts :azeq6 ,SWAZGoTo

RPI3 Fedora testing out on AMD desktop Fedpra 28 - running kstars 2.9.4 , Indilib 1.7.4 ?????
4 years 6 months ago #42873

Please Log in or Create an account to join the conversation.

  • Posts: 1067
  • Thank you received: 140

I have now, don’t bother, it trashed my Previously working image... good job I always have a back up copy.. :)
4 years 6 months ago #42879

Please Log in or Create an account to join the conversation.

  • Posts: 407
  • Thank you received: 74
But most would NEVER use a working set up to "try" something out - learn't that a long time ago on any computer system. :-)

At least you had a back up. :-)
RPI3 Ubuntu 16.04 / AMD desktop Kstars under Ubuntu 16.04 Mounts :azeq6 ,SWAZGoTo

RPI3 Fedora testing out on AMD desktop Fedpra 28 - running kstars 2.9.4 , Indilib 1.7.4 ?????
4 years 6 months ago #42882

Please Log in or Create an account to join the conversation.

  • Posts: 52
  • Thank you received: 15

Replied by Acapulco Rolf on topic Raspberry Pi 4

Raspberry Pi 4 going into service to control my second mount and refractor setup
4 ARM cores running at 1.5GHz with 4Gb of RAM

Mounted in a Flirc enclosure and running ekos/kstars on Ubuntu
The Flirc is perfroming well, keeping Raspberry Pi temps down in the lower 40s (celsius) during the early hours

Also in the photo, a DIY RA/DEC motor controller (AstroEQ) can be seen

I’m slowly getting my head around ekos/kstars/indi

Currently trawling through the indi C# example source code to see how I might remotely connect to indi devices from an external imaging application

My initial thoughts are to see if I can write some code to establish connectivity and remotely display the output from my DIY Arduino weather conditions device
Will have to see how this goes

#workinprogress
#needclearskies
#cablemanagementnightmare
The following user(s) said Thank You: Jasem Mutlaq
Last edit: 4 years 6 months ago by Acapulco Rolf.
4 years 6 months ago #42899
Attachments:

Please Log in or Create an account to join the conversation.

Replied by Jasem Mutlaq on topic Raspberry Pi 4

That's pretty awesome! Please keep us updated with your progress.
4 years 6 months ago #42901

Please Log in or Create an account to join the conversation.

  • Posts: 1067
  • Thank you received: 140

Replied by AstroNerd on topic Raspberry Pi 4


Not quite sure what you mean, as many of us control INdI equipment connected to rpi4 from a separate PC with Kstars running, wirelessly over a network, or am I missing something here...are you trying to do something Else..
4 years 6 months ago #42904

Please Log in or Create an account to join the conversation.

  • Posts: 52
  • Thank you received: 15

Replied by Acapulco Rolf on topic Raspberry Pi 4

I’m using separate open source C# application for imaging and sequencing called N.I.N.A.

The application currently supports connectivity to devices via ASCOM only at this stage.

I’m looking to write the interfacing methods in the N.I.N.A. application to connect to indi devices

I’ve seen the indi C# source code examples for how to do this in principle.

I’ll see how I get on
The following user(s) said Thank You: Jasem Mutlaq, AstroNerd
Last edit: 4 years 6 months ago by Acapulco Rolf.
4 years 6 months ago #42909

Please Log in or Create an account to join the conversation.

  • Posts: 174
  • Thank you received: 27

I installed minimalistic KDE:
sudo apt install kde-plasma-desktop
I also had to install lightdm greeter because for some reason lighdm was not showing menu for selecting desktop environment:
sudo apt install lightdm-gtk-greeter

I am running RPI4 based setup 4th imaging session and so far it is very stable, no crashes.
My setup is based on Ubuntu 18.04 Server with transplanted firmware from Raspbian.

Alex
4 years 6 months ago #42927

Please Log in or Create an account to join the conversation.

  • Posts: 1067
  • Thank you received: 140

I tried installing, and at the end, after reboot the mouse cursor came up with a black screen...so could not use
but during install I chose SDDM but had the option of that and LightDM display manager, should I have picked that second one..?
4 years 6 months ago #42934

Please Log in or Create an account to join the conversation.

  • Posts: 174
  • Thank you received: 27
@Astronerd
SDDM did not work for me but for a different reason - x11vnc was not starting and I was not able to connect to session remotely, so I just switched to LightDM.
The following user(s) said Thank You: AstroNerd
4 years 6 months ago #42972

Please Log in or Create an account to join the conversation.

  • Posts: 52
  • Thank you received: 15
Just wanted to chime back in with an update on the Raspbeery Pi 4 ekos/kstars/indi experience so far

Currently running StellarMateOS_1.4.3_rpi4
Have downloaded the new beta (StellarMateOS_1.4.4_rpi4) but not yet installed that build

Had a good imaging session at the weekend with the Pi 4 holding up just fine
Managed to get some imaging time in on M31, M42 an IC1805

Ran kstars from a Windows 10 desktop remotely connected to the Pi 4
First I got a few hours on M31
Plate solving worked like a charm, taking around 20 seconds to solve and centre the target

I then used kstars to slew the mount over to IC1805
Again plate solving centered the target in about 20 seconds

After a few more hours of data capture I slewed over to M42
Plate solving again placed the target dead centre after about 20 or so seconds

Got my first ever capture of Orion on the new refractor

Very pleased with the outcomes

Have been using indi/kstars/stellarmate for the first time for about month or so now and so far having some success

M42 capture attached

T: Altair Wave Series 80mm refractor
M: Skywatcher EQ5
C: Canon 600D (Skytech CLS filter)
S: kstars/ekos/stellarmate/phd2
D: Raspberry Pi 4 (4Gb)

#stilllearning





M42 taken on September 15th (indi/ekos/stellarmate/raspberry pi 4)


M31 taken on September 7th (indi/ekos/stellarmate/raspberry pi 4)
The following user(s) said Thank You: Jasem Mutlaq, AstroNerd, Keld Henningsen
Last edit: 4 years 6 months ago by Acapulco Rolf.
4 years 6 months ago #43442
Attachments:

Please Log in or Create an account to join the conversation.

Time to create page: 1.429 seconds