×

INDI Library v2.0.6 is Released (02 Feb 2024)

Bi-monthly release with minor bug fixes and improvements

AstroPi3 Scripts revised

  • Posts: 2876
  • Thank you received: 809
So the Astroberry, StellarMate, and the software built with my script is all pretty much the same from an astronomy point of view. They all have INDI installed including various drivers, as well as KStars and sometimes other software. You can use INDI/KStars on Raspbian, Ubuntu MATE, or other Linux systems. Astroberry uses Raspbian and StellarMate uses Ubuntu. My script can try to set up either system, but it does require some knowledge in order to decide which parts of the script you would like to use and which parts you can comment out. Also, since not all systems are the same, some issues could be encountered.

As for whether they are up to date, Astroberry, since it is an image with everything installed, could easily be out of date after some time goes by. But I assume that there is some system in Astroberry to update INDI or other software periodically. It is Raspbian, so I don't think it can use the PPA, so I don't know how that software gets updated. StellarMate is based on Ubuntu, so it almost certainly has the PPA installed, so updating indi or kstars to the latest version is pretty simple with just two commands. As for my scripts, if you use an Ubuntu-Mate installation and the script I have for setting that one up, then it uses the PPA as well. I include scripts for updating, or you can just use the update commands I mentioned earlier. If you use Raspbian with my script, then to update it, you could run my update script, but that does involve rebuilding the latest versions.

It sounds to me like you encountered some sort of issue in the build if the kstars-build folder is small. It is not that small. My recommendation to you probably would be to either use StellarMate OS on your PI, or maybe try Ubuntu Mate and run my other script? I would be glad to help you try to find out what went wrong with your Raspbian run, but it sounds like you don't have any info about what happened during the build.
1 year 1 month ago #90293

Please Log in or Create an account to join the conversation.

  • Posts: 34
  • Thank you received: 1
I do not think Stellarmate is based on Ubuntu any more. Seems like it used to be, but since 1.5.0 it has been based on Raspbian, as mentioned here .

I now have tried out Ubuntu Mate, fetching Kstars/ekos/INDI worked very well there using the PPA. However, as I need to control it remotely, I installed VNC, and it was an extremely sluggish experience. This coupled with me being unable to use the previously mentioned instructions for getting the INDI drivers for my Astrolink 4 Pi up and running, I feel like this is yet another trench that I don't have the competency or patience to dig myself out of. Is there a prefered way to remotely operate an RPI running ubuntu mate that is not super slow? As the INDI drivers for the Astrolink 4 Pi only is coupled with instructions for Astroberry and Stellarmate, could it be the case that the drivers do not work on Ubuntu Mate? Would they need to be modified? Do I need to have the maker of the Astrolink make modifications on the drivers for it to support Ubuntu Mate?
1 year 1 month ago #90350

Please Log in or Create an account to join the conversation.

  • Posts: 2876
  • Thank you received: 809
I will have to ask Jasem about this, I don't know why he would have switched to Raspbian. I thought he was pretty well set on using Ubuntu, especially because he runs the PPA and it only works on Ubuntu.

For VNC control, there are numerous programs for running that and some are faster than others. I personally have used RealVNC myself, but others seem to prefer others and say they are faster. StellarMate uses noVNC I think.

Note that you don't have to do imaging or astrophotography over VNC, you can connect your PI and connect from your laptop computer running KStars. The PI can host the INDIServer and you connect to it from KStars on the laptop. this method is not sluggish at all. It is almost always the way I control my equipment. The only time I run the whole imaging session on the Pi and just connect via VNC is when I want to have it be fully automated and turn off my laptop computer. But if you have other computers lying around where you are observing, then no need for using VNC.
The following user(s) said Thank You: Tom
1 year 1 month ago #90523

Please Log in or Create an account to join the conversation.

  • Posts: 910
  • Thank you received: 86
Hello,
I just got myself a Mele 3Q mini PC.
Installed Ubuntu Mate 22.04 and used Rob's script to install the stuff.
All went smoothly and all seems to be in place.

However, I cannot connect to Mele remotely over VNC.
When I try to connect with UltraVNC, Mele (x11vnc) asks me for a password but doesn't take any.

How to configure x11vnc correctly?
Can someone please help me!
I never used x11vnc before.

Thanks!
-- Max S
ZWO AM5. RST-135. AZ-GTI. HEQ5. iOptron SkyTracker.
TPO RC6. FRA400. Rokinon 135 and other lenses.
ZWO ASI2600MC. D5500 modified with UVIR clip-in filter.
ZWO ASI120MM Mini x 2. ZWO 30F4 guider. Orion 50mm guider.
ZWO EAF x 2.
Last edit: 1 year 1 month ago by maxthebuilder.
1 year 1 month ago #90696

Please Log in or Create an account to join the conversation.

  • Posts: 1208
  • Thank you received: 559

Replied by Hy Murveit on topic AstroPi3 Scripts revised

Just googled x11vnc password and came up with this link which claims your password might be ubuntu

learn.linksprite.com/pcduino/linux-appli...o%20in%20this%20post.

In any case, assuming that's correct, you should go through the effort to change your vnc password to something more secure.

Here's another one that shows how to set your password
www.linux.com/training-tutorials/many-wa...mote-desktop-x11vnc/

Hy
1 year 1 month ago #90699

Please Log in or Create an account to join the conversation.

  • Posts: 910
  • Thank you received: 86
Hy,
I googled too... : )
Changed my password.
Still cannot connect.
Thanks!
-- Max S
ZWO AM5. RST-135. AZ-GTI. HEQ5. iOptron SkyTracker.
TPO RC6. FRA400. Rokinon 135 and other lenses.
ZWO ASI2600MC. D5500 modified with UVIR clip-in filter.
ZWO ASI120MM Mini x 2. ZWO 30F4 guider. Orion 50mm guider.
ZWO EAF x 2.
1 year 1 month ago #90700

Please Log in or Create an account to join the conversation.

  • Posts: 910
  • Thank you received: 86
OK.
Figured it out.
x11vnc doesn't want to use 5900 port. Uses 5901.
x11vnc app doesn't work properly (at least I couldn't make it work properly).
Launched from terminal and was able to connect!
Thanks!
-- Max S
ZWO AM5. RST-135. AZ-GTI. HEQ5. iOptron SkyTracker.
TPO RC6. FRA400. Rokinon 135 and other lenses.
ZWO ASI2600MC. D5500 modified with UVIR clip-in filter.
ZWO ASI120MM Mini x 2. ZWO 30F4 guider. Orion 50mm guider.
ZWO EAF x 2.
1 year 1 month ago #90701

Please Log in or Create an account to join the conversation.

  • Posts: 335
  • Thank you received: 19

Replied by MORELLI on topic AstroPi3 Scripts revised

You can try the Nomachine solution instead of VNC. It is very simple to setup and use.
I prefer Nomachine and I use it for my house network.
1 year 1 month ago #90721

Please Log in or Create an account to join the conversation.

  • Posts: 460
  • Thank you received: 69

I also use NoMachine on my Mele Quieter 3C. Works well for me, but I can't comment on whether it's better than an alternative.

Cheers
1 year 1 month ago #90736

Please Log in or Create an account to join the conversation.

  • Posts: 910
  • Thank you received: 86
Thank you guys!
Yes, I am aware of NoMachine. I was just wondering why x11vnc was not running properly after installed by the script.
It was actually installed properly, just needed some additional configuration.
It took me quite a lot of googling but now it's working fine - auto-starts as service and accepting my password.
-- Max S
ZWO AM5. RST-135. AZ-GTI. HEQ5. iOptron SkyTracker.
TPO RC6. FRA400. Rokinon 135 and other lenses.
ZWO ASI2600MC. D5500 modified with UVIR clip-in filter.
ZWO ASI120MM Mini x 2. ZWO 30F4 guider. Orion 50mm guider.
ZWO EAF x 2.
Last edit: 1 year 1 month ago by maxthebuilder.
1 year 1 month ago #90745

Please Log in or Create an account to join the conversation.

  • Posts: 335
  • Thank you received: 19

Replied by MORELLI on topic AstroPi3 Scripts revised

Hello,

Would it be possible with AstroPi3 script to choose the version of Kstars to install ? You know that at this time there is an issue with the QHY camera and the V3.6.3.

No issue with the V3.6.2 I have it on my laptop. I would want to have it on my RPI4 (with Bulleyes) in order to stay inside during the capture and not in the cold outside.

I try to build from source this version but I have errors during the make operation. If you could solve this issue it would be great.
Last edit: 1 year 1 month ago by MORELLI.
1 year 1 month ago #90747
Attachments:

Please Log in or Create an account to join the conversation.

  • Posts: 5
  • Thank you received: 0

Replied by Nelly on topic AstroPi3 Scripts revised

Hello everyone,
I'm faceing with problems with Raspbian OS, as I installed Kstars, but ekos is missing.
Can someone help me with this issue, please?
1 year 1 week ago #91372

Please Log in or Create an account to join the conversation.

Time to create page: 0.871 seconds