×
INDI Library v1.8.3 Released (02 Jan 2020)

Minor monthly bugfix release with a new RainbowAstro mount driver and improved pier side simulation.

WB_R = 52 and WB_B = 95 default values for ZWO CCD driver

3 weeks 3 days ago
maxthebuilder
Gold Boarder
Gold Boarder
Posts: 294
More
Topic Author
WB_R = 52 and WB_B = 95 default values for ZWO CCD driver #49007
Are those (WB_R = 52 and WB_B = 95) can be left alone or need to be adjusted?
I guess, those are set to compensate for Green in RGGB pattern, right?
As far as I can tell, those settings work pretty well when I use a UVIR filter or no filter at all. RGB peaks are close to each other in the histogram.
For L-Pro and L-eNhance filters I get RGB peaks much more further apart. More Green and even more Blue than Red.
Any suggestions?
Thanks!

Max S.
RPI 3 B+ and RPI 4 B (4Gb) with Stellarmate OS.
Nikon D5500 H-a modified. 180 mm f/2.8 antique Nikon. Tamron AF 28-75mm f/2.8.
AT72EDII refractor. ZWO ASI294MC Pro
ZWO ASI120MC-S on ZWO 30F4 MiniScope.
SW AZ-GTi mount in EQ mode.
SW HEQ5.
iOptron SkyTracker Pro.

Please Log in or Create an account to join the conversation.

Time to create page: 0.152 seconds