×

INDI Library v2.0.6 is Released (02 Feb 2024)

Bi-monthly release with minor bug fixes and improvements

Re:Display bug ... AND responsivity bug!

  • Posts: 294
  • Thank you received: 54
Will do later today. Every non essential businesses will be closing today for 3 weeks and I have a few things to get before all hell breaks loose, which it already did to a certain extent. :-(
4 years 4 days ago #51106

Please Log in or Create an account to join the conversation.

  • Posts: 294
  • Thank you received: 54

Replied by Gilles Gagnon on topic Display bug ...

I have done some more 'shallow' investigation about the problem and have found that when you start KStars, EKOS and INDI with the xml files (.xml and .xml.default) deleted, I have the control over the buttons and can change baud rate, can connect, etc...

If I stop INDI and restart it without doing anything (i.e. delete xml's), responsivity is lost, baud rate can't be changed but device may connect, Indiduino Meteo Station would not but Weather Radio does.

If I stop INDI, open a terminal to delete the xml's and restart INDI, responsivity is recovered. So, unless what I tried is a special case, you don't have to stop/quit EKOS or KStars to get responsivity back.

I haven't tried with more that one device but I assume that the problem may lie across all devices specified in the profile.

Hope this helps and I can perform some more tests if needed. The xml files for Weather Radio are attached, renamed to .txt files.

Gilles
The following user(s) said Thank You: Eric
Last edit: 4 years 3 days ago by Gilles Gagnon.
4 years 3 days ago #51124
Attachments:

Please Log in or Create an account to join the conversation.

  • Posts: 268
  • Thank you received: 72
OK! One step further: The bug shows up in local mode only! If I connect the indiserver on the remote computer all is in best order.
What does that mean?
4 years 3 days ago #51126

Please Log in or Create an account to join the conversation.

I believe I have a fix for this... both INDI+KStars needs to be updated to GIT for this to work. Please try. I still do not know WHY it happens, I know it happens due to some property removal. When I check INDI, it was an unnecessary removal which is now disabled.
The following user(s) said Thank You: Toni Schriber
4 years 2 days ago #51217

Please Log in or Create an account to join the conversation.

  • Posts: 294
  • Thank you received: 54
Did a quick check with the Weather Radio driver on INDI stable and INDI nightly. Stable has the responsivity bug (button presses not working as they should), and nightly works fine. My test is not exhaustive though as my nightly system does not have much hardware attached to it. Gotta move hardware from one platform to the other.

Maybe someone who has a system working on nightly could report to confirm.
4 years 2 days ago #51225

Please Log in or Create an account to join the conversation.

  • Posts: 268
  • Thank you received: 72
These are good news! :) I'll try both options: Nightly build and GIT and report.

<strong>YES!</strong> New nightly build (as of 28.3.20) has working connection buttons anew! I'm happy , that I can go on with indi_duino again!!

Thanks again, Jasem!
Last edit: 4 years 8 hours ago by Toni Schriber.
4 years 2 days ago #51228

Please Log in or Create an account to join the conversation.

  • Posts: 268
  • Thank you received: 72
Dear Jasem

I'm sorry, I have to report a remaining small glitch!! After having switched to [Ethernet] in "Communication mode" and saved that, the buttons [Serial] [Ethernet] do still not react after the second invocation of an indi-driver. It's reproducible: Launch the "Telescope Simulator", then switch to [Ethernet] with some address and port, save this configuration, disconnect and stop the driver. Upon a new start, the mentioned buttons are dead.
Please note that I'm really glad you found the bug. Perhaps I'm a perfectionist, but in my point of view this part of the drivers has to work flawlessly.
4 years 8 hours ago #51315

Please Log in or Create an account to join the conversation.

Time to create page: 0.593 seconds