×

INDI Library v2.0.7 is Released (01 Apr 2024)

Bi-monthly release with minor bug fixes and improvements

issue after update & upgrade.

  • Posts: 238
  • Thank you received: 15
Hi all,

Anybody experienced Kstars get removed after update & upgrade recently? It happens on my astroberry and SM OS.

dpkg: error processing package astroberry-server-wui (--configure):
installed astroberry-server-wui package post-installation script subprocess returned error exit status 1
Errors were encountered while processing:
astroberry-server-wui
E: Sub-process /usr/bin/dpkg returned an error code (1)

astroberry@TomAstroPi:~ $ sudo apt install astroberry-server-full
Reading package lists... Done
Building dependency tree
Reading state information... Done
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
The following information may help to resolve the situation:

The following packages have unmet dependencies:
astroberry-server-full : Depends: astroberry-server-wui but it is not going to be installed
Depends: libindi-dev but it is not going to be installed
E: Unable to correct problems, you have held broken packages.

pi@TomAstroPi:~ $ sudo apt-get install indi-full kstars-bleeding
Reading package lists... Done
Building dependency tree
Reading state information... Done
indi-full is already the newest version (1.8.6-stable~202006051803).
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
The following information may help to resolve the situation:

The following packages have unmet dependencies:
kstars-bleeding : Depends: libraw20 but it is not going to be installed
E: Unable to correct problems, you have held broken packages.

please advice.

Tom
Last edit: 3 years 10 months ago by Tom.
3 years 10 months ago #55301

Please Log in or Create an account to join the conversation.

  • Posts: 396
  • Thank you received: 17
I did an update/upgrade tonight and it seemed to complete ok, but when trying to access the server, it says no server available. I did not have time to mess with it so I went back to a previous SD and starting imaging. I will have to look into what went wrong. I was able to VNC in once and found that it was running:
Kstars version 3.4.2 build 2020 -04-13T21:01:23Z

But after that I had issues.

Ron
3 years 10 months ago #55302

Please Log in or Create an account to join the conversation.

  • Posts: 912
  • Thank you received: 86
Yes. I had this twice. KStars and PHD2 disappeared. Had to revert to a backup.
-- Max S
ZWO AM5. RST-135. AZ-GTI. HEQ5. iOptron SkyTracker.
TPO RC6. FRA400. Rokinon 135 and other lenses.
ZWO ASI2600MC. D5500 modified with UVIR clip-in filter.
ZWO ASI120MM Mini x 2. ZWO 30F4 guider. Orion 50mm guider.
ZWO EAF x 3.
3 years 10 months ago #55304

Please Log in or Create an account to join the conversation.

  • Posts: 396
  • Thank you received: 17
I recloned the sd card and tried the update again. I had errors that some sites where not reachable (mostly raspbian/raspberrypi) it suggested I do a "sudo apt-get update --fix-missing" which I did and that ran ok. But after reboot I still have the same old version of Kstars (ver 3.4.0). After the last try (2 days ago) I had Kstars 3.4.2, but then the system crashed on reboot.

so something still seems wrong with the
sudo apt update
sudo apt upgrade -y
process.

Will try again, at least this time the system seems to be working, just not update?

Ron
3 years 10 months ago #55373

Please Log in or Create an account to join the conversation.

  • Posts: 396
  • Thank you received: 17
after that latest update I did have the latest version of astroberry (I think):
astroberry@astroberry:~ $ apt show astroberry-server-wui
Package: astroberry-server-wui
Version: 2.0.5

but the system did not come up after reboot - nothing at all, no boot at all.
Ron
3 years 10 months ago #55376

Please Log in or Create an account to join the conversation.

  • Posts: 396
  • Thank you received: 17
I ran the update process again, still some errors
dpkg: error processing archive /tmp/apt-dpkg-install-AJ3Va5/087-libmicam_1.0-2_armhf.deb (--unpack):
trying to overwrite /lib/udev/rules.d/99-miccd.rules, which is also in package indi-mi 1.5-1

I do have to Kstars version 3.4.2, but have not tried to reboot yet.
3 years 10 months ago #55377

Please Log in or Create an account to join the conversation.

  • Posts: 396
  • Thank you received: 17
sorry, got those last two messages in the wrong order. I did not realize I had not sent the first one (which is now the last one ). the order should have been 5377 then 5376.
the end result is the same. the update and upgrade did seem to go thru with only that dpkg error I mentioned. But the system does not come up after reboot.

I guess I will try a clean install and then update anything else from my other clones.

Ron
3 years 10 months ago #55378

Please Log in or Create an account to join the conversation.

  • Posts: 396
  • Thank you received: 17
main site had errors on download, went to mirror site - downloaded image and flashed to SD. It is up and running Astroberry 2.0.5, adding stuff back like rules.d and astrometry index files
so far so good

Ron
3 years 10 months ago #55405

Please Log in or Create an account to join the conversation.

Time to create page: 0.945 seconds