alacant wrote: PHD2's default is 12 iterations to give a 25 pixel move. The pulse length is determined according to guide speed and camera pixel size.
Would a pulse length calculation remove some of the confusion perhaps?
OTOH, I used EKOS' default of a pulse of 1000ms. It gave 3 pulses on each axis. I've reused this calibration 10 times without problems.
Hi, where do you set the proportional rate individually for RA/Dec?
JCJ wrote: Hi Jo,
Good idea but both values are set to 133.3%
(I would not have dared changing these values !)
As suggested by Hy I set the iteration number to the max 10 and this improved a bit the calibration plot (see attached)