Hello everybody,
I just installed Kstars-bleeding and indi on a Dell D430 under ubuntu mate 18.04LTS bionic.
The dslr appears in lsusb but doesn't want to connect under Ekos and there is no error message appearing in the log window of Ekos.
I checked to launch the indiserver by hand and get the following result which I interpret as a good start but connection still fail.
I must add that the DSLR is not mounted, it is just identified by lsusb and doesn't appears with lsblk.
I don't even know what to do. Have you any advice that can help me to fix this problem ?


2020-07-10T07:02:48: startup: indiserver -vvv indi_nikon_ccd
2020-07-10T07:02:48: Driver indi_nikon_ccd: pid=4726 rfd=3 wfd=6 efd=7
2020-07-10T07:02:48: listening to port 7624 on fd 4
2020-07-10T07:02:48: Driver indi_nikon_ccd: sending msg copy 1 nq 1:
<getProperties version='1.7'/>

2020-07-10T07:02:48: Driver indi_nikon_ccd: Number of cameras detected: 1.
2020-07-10T07:02:48: Driver indi_nikon_ccd: Detected camera model Nikon DSC D5300 on port usb:001,009
2020-07-10T07:02:48: Driver indi_nikon_ccd: read getProperties Telescope Simulator EQUATORIAL_EOD_COORD
2020-07-10T07:02:48: Driver indi_nikon_ccd: snooping on Telescope Simulator.EQUATORIAL_EOD_COORD
2020-07-10T07:02:48: Driver indi_nikon_ccd: read getProperties Telescope Simulator TELESCOPE_INFO
2020-07-10T07:02:48: Driver indi_nikon_ccd: snooping on Telescope Simulator.TELESCOPE_INFO
2020-07-10T07:02:48: Driver indi_nikon_ccd: read getProperties Telescope Simulator GEOGRAPHIC_COORD
2020-07-10T07:02:48: Driver indi_nikon_ccd: snooping on Telescope Simulator.GEOGRAPHIC_COORD
2020-07-10T07:02:48: Driver indi_nikon_ccd: read getProperties Focuser Simulator ABS_ROTATOR_ANGLE
2020-07-10T07:02:48: Driver indi_nikon_ccd: snooping on Focuser Simulator.ABS_ROTATOR_ANGLE
2020-07-10T07:02:48: Driver indi_nikon_ccd: read getProperties CCD Simulator FILTER_SLOT
2020-07-10T07:02:48: Driver indi_nikon_ccd: snooping on CCD Simulator.FILTER_SLOT
2020-07-10T07:02:48: Driver indi_nikon_ccd: read getProperties CCD Simulator FILTER_NAME
2020-07-10T07:02:48: Driver indi_nikon_ccd: snooping on CCD Simulator.FILTER_NAME
2020-07-10T07:02:48: Driver indi_nikon_ccd: read getProperties SQM SKY_QUALITY
2020-07-10T07:02:48: Driver indi_nikon_ccd: snooping on SQM.SKY_QUALITY
2020-07-10T07:02:48: Driver indi_nikon_ccd: read defSwitchVector Nikon DSLR DSC D5300 CONNECTION Idle rw
CONNECT='Off'
DISCONNECT='On'
2020-07-10T07:02:48: Driver indi_nikon_ccd: read defTextVector Nikon DSLR DSC D5300 DRIVER_INFO Idle ro
DRIVER_NAME='GPhoto CCD'
DRIVER_EXEC='indi_nikon_ccd'
DRIVER_VERSION='2.6'
DRIVER_INTERFACE='10'
2020-07-10T07:02:48: Driver indi_nikon_ccd: read defNumberVector Nikon DSLR DSC D5300 POLLING_PERIOD Idle rw
PERIOD_MS='1000'
2020-07-10T07:02:48: Driver indi_nikon_ccd: read defSwitchVector Nikon DSLR DSC D5300 DEBUG Idle rw
ENABLE='Off'
DISABLE='On'
2020-07-10T07:02:48: Driver indi_nikon_ccd: read defSwitchVector Nikon DSLR DSC D5300 SIMULATION Idle rw
ENABLE='Off'
DISABLE='On'
2020-07-10T07:02:48: Driver indi_nikon_ccd: read defSwitchVector Nikon DSLR DSC D5300 CONFIG_PROCESS Idle rw
CONFIG_LOAD='Off'
CONFIG_SAVE='Off'
CONFIG_DEFAULT='Off'
2020-07-10T07:02:48: Driver indi_nikon_ccd: read defTextVector Nikon DSLR DSC D5300 ACTIVE_DEVICES Idle rw
ACTIVE_TELESCOPE='Telescope Simulator'
ACTIVE_FOCUSER='Focuser Simulator'
ACTIVE_FILTER='CCD Simulator'
ACTIVE_SKYQUALITY='SQM'
2020-07-10T07:02:48: Driver indi_nikon_ccd: read defTextVector Nikon DSLR DSC D5300 DEVICE_PORT Idle rw
PORT=''
2020-07-10T07:03:13: Client 0: new arrival from 127.0.0.1:40762 - welcome!