×

INDI Library v2.0.6 is Released (02 Feb 2024)

Bi-monthly release with minor bug fixes and improvements

Omegon Pro / Touptek drivers

  • Posts: 26
  • Thank you received: 3
Denis,
thanks a lot for the workaround! Now my Omegon 571 is working fine again...
11 months 1 day ago #92441

Please Log in or Create an account to join the conversation.

  • Posts: 114
  • Thank you received: 17

Replied by Denis on topic Omegon Pro / Touptek drivers

I tried to do live stacking with new driver last night and met same issue: indilib.org/forum/general/9923-omegon-pr....html?start=48#92186 ((

Image can't be downloaded from camera randomly, I had to restart live stacking each 10-20 minutes. Previous version of driver worked fine for my RizingCam IMX571
Last edit: 11 months 2 hours ago by Denis.
11 months 4 hours ago #92461

Please Log in or Create an account to join the conversation.

  • Posts: 5
  • Thank you received: 0
Hello all,
this is my first post after I am using Astroberry since almost 3 years.

My problem: I bought a Touptec 2600 camera, labled and sold by Noctutec in Germany. However, Astroberry does not recognize the camera at all, so did Sharpcap and even Toupsky in the beginning.
After contacting them, Noctutec informed me that the camera has the very latest firmware status and that there are also new drivers necessary (which they attached to their reply). After installing, Sharpcap and Toupsky (Windows) are working, however, I have no idea how to install the drivers in Linux or if they probably need to be modified for INDI.

Is somebody out there who can help?

Thank you for your replies

Bernhard
5 months 3 weeks ago #96134

Please Log in or Create an account to join the conversation.

It's supported in INDI for a while now. Just make sure you have the latest libindi and indi-3rd party installed.
5 months 3 weeks ago #96135

Please Log in or Create an account to join the conversation.

  • Posts: 5
  • Thank you received: 0
Hello Jasem,
thanks for your very prompt reply. But sorry, I am stupid on Linux. Found the 3rd party files in Github, but how to insall it?
Concerning libindi, I updated my system abou two weeks ago, shall be included, right?

Greetings
Bernhard
5 months 3 weeks ago #96138

Please Log in or Create an account to join the conversation.

  • Posts: 5
  • Thank you received: 0
Hello Jasem,
I checked again and I have the newest drivers installed, including the 3rd party drivers. The camera is not recognized at all.

On the other hand, I saw that a long list of lables are mentioned under the 3rd party drivers, Noctutec is not. Are there probably little modifications between the different lables?

Greetings
Bernhard
5 months 3 weeks ago #96141

Please Log in or Create an account to join the conversation.

  • Posts: 217
  • Thank you received: 19
Hi Bernhard,
you are using Astroberry, which isnt supported anymore since Kstars 3.6.0 (up to date version: 3.6.7) So your INDI drivers are nearly 1.5 years old...

A 64bit version of Astroberry seems to be released in a few weeks/months/...

Maybe it is better to switch to Stellarmate or to e.g. astroarch indilib.org/forum/general/12964-astroarc...raphy-for-arm64.html

But take care: "Optical Trains" have been indroduced since then, please google, there is a youtube from Jasem with explanations.
5 months 3 weeks ago #96143

Please Log in or Create an account to join the conversation.

  • Posts: 5
  • Thank you received: 0
Hello Juergen,
thank you for this information. It may be the source of my problems.
5 months 3 weeks ago #96144

Please Log in or Create an account to join the conversation.

  • Posts: 969
  • Thank you received: 94
Hi Jasem, everyone

There seems to be a bug with the latest SDK shipped with the INDI which accompanies the latest stable 3.6.7.
I created a separate thread with details and a workaround.:
www.indilib.org/forum/ccds-dslrs/13968-omegon-vtec-571.html

Cheers and clear skies,
Steve
5 months 1 week ago #96523

Please Log in or Create an account to join the conversation.

  • Posts: 239
  • Thank you received: 38
Updated drivers awaiting commit on the bleeding build. Should address those issues.
5 months 1 week ago #96533

Please Log in or Create an account to join the conversation.

  • Posts: 969
  • Thank you received: 94
Hi Sonny, everyone
Thanks.
Could you post a link to the pr so we can follow it? I looked everywhere but can't find it.
TIA,
Steve

**EDIT. OK, found it:
github.com/indilib/indi-3rdparty/pull/850/commits

Confirmed: 54.23585 fixes the issue:
lrwxrwxrwx 1 root root 21 oct 18 14:39 libomegonprocam.so -> libomegonprocam.so.54
lrwxrwxrwx 1 root root 27 oct 18 14:35 libomegonprocam.so.54 -> libomegonprocam.so.54.23585
-rw-r--r-- 1 root root 21542824 oct 17 11:24 libomegonprocam.so.54.22587
-rw-r--r-- 1 root root 21637016 sep 30 20:04 libomegonprocam.so.54.23231
-rw-r--r-- 1 root root 21714968 oct 18 14:33 libomegonprocam.so.54.23585
Last edit: 5 months 1 week ago by alacant.
5 months 1 week ago #96541

Please Log in or Create an account to join the conversation.

  • Posts: 12
  • Thank you received: 1

Replied by Karas on topic Omegon Pro / Touptek drivers

Noctutec camera is compatible with ToupTek driver. Comfirmed.
5 months 1 week ago #96559

Please Log in or Create an account to join the conversation.

Time to create page: 1.633 seconds