Hi guys
Done some testing and without an option to disable the auxiliary encoders, I can’t think of a way to perform the initial telescope align
Any ideas welcome
Paul

Sorry bit slow this morning, there is a way
Suppose I want to align on Vega
1 goto Vega
2 Press clear model button
3 use arrow keys to align on Vega
4 press sync button

Sorry no testing tonight outside speaker at Astro Society

Regards
Paul

The libev-dev part worked but update_indi_core still looks a bit weird:

stellarmate@stellarmate:~ $ sudo apt-get -y install libev-dev
Reading package lists... Done
Building dependency tree
Reading state information... Done
libev-dev is already the newest version (1:4.25-1).
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
stellarmate@stellarmate:~ $ update_indi_core
Already up to date.
make: *** No targets specified and no makefile found. Stop.
make: *** No rule to make target 'install'. Stop.
stellarmate@stellarmate:~ $

Yes sorry, I'll improve the script to be more reliable on SM OS v1.7.2 release. At any rate, for now do this first:

OK, the build process worked with one error message that the indi directory existed and wasn't empty. the update_indi_core command appears to have worked fine.

Sadly the update has caused my Canon driver to crash when starting Ekos. I think there was a comment about this already. When I get a moment I'll go back and reread the thread but for now the system appears to be unusable.

Also, both of the red error message about Zero Microsteps per worm revolution is now a warning message in an orange/yellow color.

It says 'Possible corrupted data'.

Am I to understand that you do not see this on your AZ-GTI?

[2022-07-07T11:21:34.830 MST INFO ][ org.kde.kstars.ekos] - "AZ-GTi Alt-Az WiFi is online."
[2022-07-07T11:21:34.959 MST INFO ][ org.kde.kstars.ekos] - "Guider port from AZ-GTi Alt-Az WiFi is ready."
[2022-07-07T11:21:35.077 MST INFO ][ org.kde.kstars.indi] - AZ-GTi Alt-Az WiFi : "[INFO] Mount is unparked. "
[2022-07-07T11:21:35.078 MST INFO ][ org.kde.kstars.indi] - AZ-GTi Alt-Az WiFi : "[INFO] Loading device configuration... "
[2022-07-07T11:21:35.081 MST INFO ][ org.kde.kstars.indi] - AZ-GTi Alt-Az WiFi : "[INFO] Auto search is enabled. When connecting, the driver shall attempt to communicate with all available system ports until a connection is established. "
[2022-07-07T11:21:35.083 MST INFO ][ org.kde.kstars.indi] - AZ-GTi Alt-Az WiFi : "[INFO] Dome Policy set to: Dome ignored. Mount can park or unpark regardless of dome parking state. "
[2022-07-07T11:21:35.085 MST INFO ][ org.kde.kstars.indi] - AZ-GTi Alt-Az WiFi : "[INFO] Observer location updated: Latitude 32:13:14.0 (32.22) Longitude -110:58:08.0 (-110.97) "
[2022-07-07T11:21:35.087 MST INFO ][ org.kde.kstars.indi] - AZ-GTi Alt-Az WiFi : "[INFO] Device configuration applied. "
[2022-07-07T11:21:35.237 MST INFO ][ org.kde.kstars.ekos.mount] - "Telescope info updated successfully."
[2022-07-07T11:21:35.325 MST INFO ][ org.kde.kstars.indi] - AZ-GTi Alt-Az WiFi : "[INFO] Observer location updated: Latitude 32:13:14.0 (32.22) Longitude -110:58:08.0 (-110.97) "
[2022-07-07T11:21:37.785 MST CRIT ][ org.kde.kstars.indi] - INDI driver "indi_canon_ccd" crashed!
[2022-07-07T11:21:40.789 MST CRIT ][ org.kde.kstars.indi] - INDI driver "indi_canon_ccd" crashed!
[2022-07-07T11:21:41.917 MST INFO ][ org.kde.kstars.ekos] - "Unable to establish:\n+ Canon DSLR\nPlease ensure the device is connected and powered on."
[2022-07-07T11:21:51.335 MST DEBG ][ org.kde.kstars] - 22 StarBlocks freed from StarBlockFactory

For 3rd party drivers (Canon..etc) run this:
Yes, with my AZ-GTi, I get worm gear count.

Different firmware in our AZ-GTI's? I've updated 6-12 months ago for the equatorial mode but I think this error, now a warning, was there before. Just not totally sure.

Anyway, I need to solve the canon driver crash first.

OK, so I see I need the indi-3rdparty code.

I need instructions to download and build it on Stellarmate. I'm not a programmer.

Just run this command as I indicated above:

I tried that but it failed. Error message below. That's why I thought I had to go to Github.

[ 25%] Linking CXX executable indi_nexdome
[ 25%] Built target indi_nexdome
make: *** [Makefile:152: all] Error 2
[ 6%] Built target indi_azgti_telescope
[ 11%] Built target indi_staradventurer2i_telescope
[ 16%] Built target indi_eqmod_telescope
[ 16%] Built target indi_astrolink4
[ 17%] Built target indi_lx200aok
[ 19%] Built target indi_starbook_telescope
[ 20%] Built target indi_starbook_ten
[ 20%] Built target indi_sx_wheel
[ 22%] Built target sx_ccd_test
[ 23%] Linking CXX executable indi_sx_ccd
/usr/bin/ld: CMakeFiles/indi_sx_ccd.dir/sxccd.cpp.o:(.data.rel.ro+0xcc): undefined reference to `INDI::CCD::addFITSKeywords(fitsfile*, INDI::CCDChip*)'
collect2: error: ld returned 1 exit status
make[2]: *** [indi-sx/CMakeFiles/indi_sx_ccd.dir/build.make:102: indi-sx/indi_sx_ccd] Error 1
make[1]: *** [CMakeFiles/Makefile2:1401: indi-sx/CMakeFiles/indi_sx_ccd.dir/all] Error 2
make: *** [Makefile:152: all] Error 2
stellarmate@stellarmate:~ $