Hi all,
I am new to Indi and I am trying to use it to control an EQ-G mount from a raspberry pi using this cable
www.telescopes-et-accessoires.fr/interfa...5-neq5-3-c2x30317625
When I try launching these commands
indiserver -v indi_eqmod_telescope
or
indiserver -v indi_synscan_telescope
I get the following output:
indiserver -v indi_eqmod_telescope
2022-06-04T20:22:40: startup: indiserver -v indi_eqmod_telescope
2022-06-04T20:22:40: Driver indi_eqmod_telescope: pid=31385 rfd=3 wfd=6 efd=7
2022-06-04T20:22:40: listening to port 7624 on fd 4
2022-06-04T20:22:40: Driver indi_eqmod_telescope: snooping on GPS Simulator.GEOGRAPHIC_COORD
2022-06-04T20:22:40: Driver indi_eqmod_telescope: snooping on GPS Simulator.TIME_UTC
2022-06-04T20:22:40: Driver indi_eqmod_telescope: snooping on Dome Simulator.DOME_PARK
2022-06-04T20:22:40: Driver indi_eqmod_telescope: snooping on Dome Simulator.DOME_SHUTTER
2022-06-04T20:22:40: Driver indi_eqmod_telescope: Using prefix /usr/share/indi//indi_eqmod_sk.xml
2022-06-04T20:22:40: Driver indi_eqmod_telescope: Using prefix /usr/share/indi//indi_align_sk.xml
2022-06-04T20:22:40: Driver indi_eqmod_telescope: Using prefix /usr/share/indi//indi_eqmod_simulator_sk.xml
2022-06-04T20:22:40: Driver indi_eqmod_telescope: Using prefix /usr/share/indi//indi_eqmod_scope_limits_sk.xml
2022-06-04T20:22:40: Driver indi_eqmod_telescope: EnumeratePlugins - found plugin Nearest Math Plugin
2022-06-04T20:22:40: Driver indi_eqmod_telescope: EnumeratePlugins - found plugin SVD Math Plugin
indiserver -v indi_synscan_telescope
2022-06-04T20:26:25: startup: indiserver -v indi_synscan_telescope
2022-06-04T20:26:25: Driver indi_synscan_telescope: pid=31397 rfd=3 wfd=6 efd=7
2022-06-04T20:26:25: listening to port 7624 on fd 4
2022-06-04T20:26:25: Driver indi_synscan_telescope: snooping on GPS Simulator.GEOGRAPHIC_COORD
2022-06-04T20:26:25: Driver indi_synscan_telescope: snooping on GPS Simulator.TIME_UTC
2022-06-04T20:26:25: Driver indi_synscan_telescope: snooping on Dome Simulator.DOME_PARK
2022-06-04T20:26:25: Driver indi_synscan_telescope: snooping on Dome Simulator.DOME_SHUTTER
It looks like indiserver is connecting to a simulator in both cases. Is it the case?
What makes me think this is the case is that the output does not change when I run the command when the mount is disconnected or off.
Any idea of how to debug this?
I am able to control the mount when I connect it to my macbook with EqMac and the EQDirect driver.
Is there an equivalent of EQdirect for Indiserver?
thanks
bye
Dave
Topic Author
