×

INDI Library v2.0.6 is Released (02 Feb 2024)

Bi-monthly release with minor bug fixes and improvements

HC-05 connetion problem AstroEQ

  • Posts: 2
  • Thank you received: 0
HI there I found only one thread about this issue, so I open a new one to report my werdict.

I had no problem for a while, but there was some update and its started.
I tried 3 different moduels, two different DC adapters, I got the same warning messages: dispatch_command() : serial port read failed for 200ms (1 retries), verify mount link.
I made some test, I took out the mount electronics and its near to the raspberry about 5cm. I got the same error message: dispatch_command() : serial port read failed for 200ms (1 retries), verify mount link.
But When I connecting with laptop about 2m there is on connection issues here is the log from EQMOD log file belove.
As can be seen there is no communication issues the delay is does not exceed 300ms and sometimes approaches to 100ms.
So my final werdict its looks like indi or raspberry problem, but about 5cm should be over 200ms readouts.

PS sorry my bad english
EQMOD log:
start
16:51:21.411 TX :j1

16:51:21.588 RX =B4CDBB

16:51:21.588 TX :j2

16:51:21.745 RX =F8ABDD

16:51:21.958 TX :j1

16:51:22.133 RX =6C5ABC

16:51:22.133 TX :j2

16:51:22.289 RX =0039DE

16:51:22.488 TX :j1

16:51:22.648 RX =84DEBC

16:51:22.648 TX :j2

16:51:22.828 RX =40C4DE

16:51:23.031 TX :j1

16:51:23.209 RX =DC70BD

16:51:23.209 TX :j2

16:51:23.396 RX =F857DF
1 year 8 months ago #84359

Please Log in or Create an account to join the conversation.

Time to create page: 0.255 seconds