×

INDI Library v2.0.6 is Released (02 Feb 2024)

Bi-monthly release with minor bug fixes and improvements

Avalon Driver Setup

Replied by Jasem Mutlaq on topic Avalon Driver Setup

Oppps my mistake. I was copying the build recipe from EQMod and forgot to change one variable. Ok wait a couple of hours for a rebuild.
The following user(s) said Thank You: Nicola Döbelin
5 years 2 months ago #33351

Please Log in or Create an account to join the conversation.

  • Posts: 12
  • Thank you received: 0

Replied by Nicola Döbelin on topic Avalon Driver Setup

Awesome! Now it works. Thanks for the quick fix.

Un-/parking and slewing works like a charm. I will test centering, syncing, tracking and guiding next time we get clear skies. I had some issues with the focuser, though. It is an Avalon FOCS connected to AUX1 of the mount. Indi doesn't seem to read the position. It stays at 0 when it moves out, and then doesn't allow me to move back in. But I only tested it for 5 minutes. I'll try again later.

Nic
5 years 2 months ago #33354

Please Log in or Create an account to join the conversation.

  • Posts: 1185
  • Thank you received: 370
Hi Nic,
the Avalon FOCS interface is at a very early stage. Since I do not own an Avalon FOCS, I cannot test and fix it yet. But I will try to contact the author of the focuser code.
- Wolfgang
The following user(s) said Thank You: Nicola Döbelin
5 years 2 months ago #33355

Please Log in or Create an account to join the conversation.

  • Posts: 12
  • Thank you received: 0

Replied by Nicola Döbelin on topic Avalon Driver Setup

Hi Wolfgang,

That would be fantastic. You guys are awesome! Let me know if I can be of any assistance.

Nic
5 years 2 months ago #33358

Please Log in or Create an account to join the conversation.

  • Posts: 1185
  • Thank you received: 370
Could you please post the corresponding log file? I should sit unter ~/.local/share/kstars/logs
5 years 2 months ago #33360

Please Log in or Create an account to join the conversation.

  • Posts: 12
  • Thank you received: 0

Replied by Nicola Döbelin on topic Avalon Driver Setup

Sure, see attached. I set the output mode to "verbose" and activated "Mount" and "Focuser" output for both Ekos and the driver. Then I pressed some buttons (move out, move in, sync position, set absolute position, change focuser speed).
5 years 2 months ago #33361
Attachments:

Please Log in or Create an account to join the conversation.

  • Posts: 1185
  • Thank you received: 370
In the logs there is a warning:
Focus mode is halt. Select slow or fast mode
At least from the source code it looks like the focuser speed is set to "Halt". Are the buttons available on the INDI panel to set it to "Slow" or "Fast"?
5 years 2 months ago #33362

Please Log in or Create an account to join the conversation.

  • Posts: 12
  • Thank you received: 0

Replied by Nicola Döbelin on topic Avalon Driver Setup

The speed dial is numerical (see attached). It defaults to a value of 2. The controls are enabled. I can change the value, but it has no effect on the actual speed.
5 years 2 months ago #33364
Attachments:

Please Log in or Create an account to join the conversation.

  • Posts: 1185
  • Thank you received: 370
Hm, without a working Avalon FOCS, it is difficult to drill the problem down. One option would be that you download the sources and debug it on your own.

If you want to do it, I can assist you in setting up a development environment.
5 years 2 months ago #33372

Please Log in or Create an account to join the conversation.

  • Posts: 12
  • Thank you received: 0

Replied by Nicola Döbelin on topic Avalon Driver Setup


I see. But to be honest, I would not even know where to start with the debugging and what to look for. Would it help if I give you TeamViewer access to my mount-side PC? I already pulled the source code of indi and kstars from github and compiled it. Plus I can point a camera at the focuser, so you get a live stream of the movements. I will re-install the PC anyway, so I don't care if you mess it up. And I will disengage all clutches of the mount and focuser, so you can't do any damage when testing movements. What do you think?
5 years 2 months ago #33379

Please Log in or Create an account to join the conversation.

  • Posts: 1185
  • Thank you received: 370
Hi Nic,
we could give it a try. I will send you a private message.
5 years 2 months ago #33427

Please Log in or Create an account to join the conversation.

  • Posts: 15
  • Thank you received: 2
Hi NICD,

I wrote the initial version of the focuser interface. Currently I don't have much free time but I will see what I can do.

I have a couple of questions:
- What is the firmware version you are using for StarGO?
- Are you commanding the motor to move through the interface or are you physically moving it?
- If you are commanding the motor to move through the interface is it actually moving? (I think it moves out but wont move in)

I suspect I know what is happening but I will get back to you.
5 years 2 months ago #33434

Please Log in or Create an account to join the conversation.

Time to create page: 0.903 seconds