INDI Library v1.8.3 Released (02 Jan 2020)

Minor monthly bugfix release with a new RainbowAstro mount driver and improved pier side simulation.

10micron GM100 Indi driver

11 months 3 weeks ago
Fresh Boarder
Fresh Boarder
Posts: 4
Topic Author
10micron GM100 Indi driver #34466
Hello all,
I'm working to make my GM1000 mount work remotely - in my garden (ultimately in spectroscopy - I'm the manager of Shelyak Instruments).
I recently discovered Ekos & Kstars (you did an amazing job !), and want to use it with the Indi server on a Raspberry Pi close to the telescope.
All is working fine, but I face a problem with the GM1000 mount Indi driver : I've no access to the 'SLEW RATE' parameter, and can only move the telescope at full speed.
Did I miss something (= is there an alternate way to move the telescope at guiding speed) ?
Is it possible to contact the 10micron Indi driver author (Hans Lambermont, as given in the driver page) ?
Any help would be warmly welcome.

Please Log in or Create an account to join the conversation.

Time to create page: 0.894 seconds