×

INDI Library v1.9.3 Released (11 Nov 2021)

Bimonthly Stable INDI Library release introduces new drivers and fixes for existing ones. Some highlights:

Re:Re:EQMOD: Cannot turn DEBUG off

  • Posts: 102
  • Thank you received: 7
Hello,

there is a bug in the INDI Eqmod driver. Even I press the disable button, it debugs like hell.
What can I do to turn this off?

Thomas
Thomas Jäger
www.starhopper.eu
Linux Mint19.2
300/1200mm, 200/1000mm & 200/618mm Newton, Esprit 100/550mm, C 9.25"
SBIG STL11000M C2, Moravian G2-8300, ZWO ASI183MM-C and ASI2600
1 year 8 months ago #51012
Attachments:

Please Log in or Create an account to join the conversation.

  • Posts: 389
  • Thank you received: 142
If you use KStars, it controls debug logging by forcing it on/off if you try to modify it yourself from INDI control panel, so check there.
Remote observatory running Ubuntu 21.04 x64 with ScopeDome 2M, Skywatcher EQ8, TS 8" RC, Atik 383L+, ASI178MC, ASI120MM-S, SX Lodestar X2, SX USB wheel with OAG, ZWO EAF, Gemini SnapCap, USB_DewPoint, KomaHub
1 year 8 months ago #51019

Please Log in or Create an account to join the conversation.

  • Posts: 1011
  • Thank you received: 298
The control is on the toolbar of the Ekos manager, marked "logs", near the start button.

-Eric
HEQ5-Pro - Atik 314E - Orion ED80T - DMK21 on Orion 50mm
DIY 3D-printed Moonlite and FWheel RGB/LPR
KStars and indiserver on two Atom 1.6GHz 1GB RAM Linux, VPN remote access
1 year 8 months ago #51022

Please Log in or Create an account to join the conversation.

  • Posts: 102
  • Thank you received: 7
Thank's Eric and jpaana,

I do not use EKOS. Now I have tried it under EKOS. Here it works.
What can I do?
Thomas Jäger
www.starhopper.eu
Linux Mint19.2
300/1200mm, 200/1000mm & 200/618mm Newton, Esprit 100/550mm, C 9.25"
SBIG STL11000M C2, Moravian G2-8300, ZWO ASI183MM-C and ASI2600
1 year 8 months ago #51043

Please Log in or Create an account to join the conversation.

  • Posts: 1011
  • Thank you received: 298
I can't see your picture, which client are you using?

-Eric
HEQ5-Pro - Atik 314E - Orion ED80T - DMK21 on Orion 50mm
DIY 3D-printed Moonlite and FWheel RGB/LPR
KStars and indiserver on two Atom 1.6GHz 1GB RAM Linux, VPN remote access
1 year 8 months ago #51326

Please Log in or Create an account to join the conversation.

  • Posts: 102
  • Thank you received: 7
Hello,
I am using Indistarter and CCDCiel and EQModGui.
It debug even it is disabled and saved. See XML config file (renamed for the forum).
Thomas
Thomas Jäger
www.starhopper.eu
Linux Mint19.2
300/1200mm, 200/1000mm & 200/618mm Newton, Esprit 100/550mm, C 9.25"
SBIG STL11000M C2, Moravian G2-8300, ZWO ASI183MM-C and ASI2600
1 year 8 months ago #51488
Attachments:

Please Log in or Create an account to join the conversation.

  • Posts: 102
  • Thank you received: 7
It happens even without these clients when I start it from command line
indiserver indi_eqmod_telescope indi_asi_ccd indi_moonlite_focus
Thomas Jäger
www.starhopper.eu
Linux Mint19.2
300/1200mm, 200/1000mm & 200/618mm Newton, Esprit 100/550mm, C 9.25"
SBIG STL11000M C2, Moravian G2-8300, ZWO ASI183MM-C and ASI2600
1 year 7 months ago #51498

Please Log in or Create an account to join the conversation.

  • Posts: 102
  • Thank you received: 7
Hello Forum,
can anybody help?
Thomas
Thomas Jäger
www.starhopper.eu
Linux Mint19.2
300/1200mm, 200/1000mm & 200/618mm Newton, Esprit 100/550mm, C 9.25"
SBIG STL11000M C2, Moravian G2-8300, ZWO ASI183MM-C and ASI2600
1 year 7 months ago #51597

Please Log in or Create an account to join the conversation.

  • Posts: 1011
  • Thank you received: 298
I will, I have everything to reproduce the problem, plus I am looking for things that could disturb the network link between two indiservers.

-Eric
HEQ5-Pro - Atik 314E - Orion ED80T - DMK21 on Orion 50mm
DIY 3D-printed Moonlite and FWheel RGB/LPR
KStars and indiserver on two Atom 1.6GHz 1GB RAM Linux, VPN remote access
1 year 7 months ago #51601

Please Log in or Create an account to join the conversation.

  • Posts: 102
  • Thank you received: 7
Is there something I can do?
Thomas
Thomas Jäger
www.starhopper.eu
Linux Mint19.2
300/1200mm, 200/1000mm & 200/618mm Newton, Esprit 100/550mm, C 9.25"
SBIG STL11000M C2, Moravian G2-8300, ZWO ASI183MM-C and ASI2600
1 year 7 months ago #51705

Please Log in or Create an account to join the conversation.

  • Posts: 1011
  • Thank you received: 298
(suppressed)
HEQ5-Pro - Atik 314E - Orion ED80T - DMK21 on Orion 50mm
DIY 3D-printed Moonlite and FWheel RGB/LPR
KStars and indiserver on two Atom 1.6GHz 1GB RAM Linux, VPN remote access
Last edit: 1 year 7 months ago by Eric.
1 year 7 months ago #51732

Please Log in or Create an account to join the conversation.

  • Posts: 1011
  • Thank you received: 298
Additional hours in a single day perhaps :) sorry I've not started on this, as nights are clear for grabbing data and days are full with issues at work.

EDIT: pressed send too quick. The driver code certainly has debug logs associated to incorrect levels. That's what I would look for. Then I would check for incorrect debug level management directly in the function managing the property, though I doubt it was overridden in the eqmod driver.

-Eric


-Eric
HEQ5-Pro - Atik 314E - Orion ED80T - DMK21 on Orion 50mm
DIY 3D-printed Moonlite and FWheel RGB/LPR
KStars and indiserver on two Atom 1.6GHz 1GB RAM Linux, VPN remote access
1 year 7 months ago #51733

Please Log in or Create an account to join the conversation.

Time to create page: 0.329 seconds