×

INDI Library v2.0.6 is Released (02 Feb 2024)

Bi-monthly release with minor bug fixes and improvements

how Connect my Pi to my LX90 CCD/ST4 port with a USB Guider device

  • Posts: 2
  • Thank you received: 0
Hi,

I don't know how to connect to my mount to its CCD ST4 port. I don't know if the pierro-astro USB Guider is supported by INDI, and if yes, I don't know how to configure it. I have a Meade LX90 (very old, not GPS, not LN) with the accessory #909 on it (port for reticule, focuser and CCD). Previously, in PHD2, I was using the ASCOM ST4-LX200 and it was working.

Secondly, As guider camera, I use a Meade DSI (first generation), So, the actual INDI driver for Meade DSI PRO I/II work pretty well on it. But, in EKos, I don't know If I need to add it as CCD or as Guider. And, I don't know how to use my USB Guider (pierro-astro 1st gen).

So, finally, if I summarize, I would like my DSI be my guider, and send the information to my mount to its CCD/ST4 port with the USB Guider device. Using PHD2.

Any help is welcome!!

Best Regards,
Eric
3 years 4 months ago #63142

Please Log in or Create an account to join the conversation.

Time to create page: 0.261 seconds